• Composites Research
• /
• 제16권1호
• /
• pp.13-18
• /
• 2003

복합재료의 피로수명을 평가하는 것은 여러 가지 파손모드와 파손모드 간의 강호작용 때문에 복잡하다. 본 논문에서는 현상론적인 모델(비선형 강도저하 모델)을 이용하여 피로수명과 잔류강도를 예측할 수 있는 방법을 제시하였다. 잔류강도를 하중 사이클 수와 피로응력의 함수로 가정하였으며, 계산에 필요한 모델변수(강도저하 파라미터, 피로수명형상 파라미터)를 피로수명의 함수로 가정하였다 임의로 배열된 하중 스펙트럼 상에서 응력수준에 따른 모델 매개변수를 구하기 위해 S-N 선도를 이용하였고, 상이한 응력비에 대하여 전술한 매개변수를 Goodman식의 보정을 통하여 계산하였다(피로선도). 임의의 하중이력 후의 잔여강도 분포를 2모수 weibull 함수로 표현하였다.

• 대한기계학회논문집A
• /
• 제30권4호
• /
• pp.409-419
• /
• 2006

The actuating performance of plate-type unimorph piezoelectric composite actuators having various stacking sequences was evaluated by three dimensional finite element analysis on the basis of thermal analogy model. Thermal residual stress distribution at each layer in an asymmetrically laminated plate with PZT ceramic layer and thermally induced dome height were predicted using classical laminated plate theory. Thermal analogy model was applied to a bimorph cantilever beam and LIPCA-C2 actuator in order to confirm its validity. Finite element analysis considering thermal residual deformation showed that the bending behavior of piezoelectric composite actuator subjected to electric loads was significantly different according to the stacking sequence, thickness of constituent PZT ceramic and boundary conditions. In particular, the increase of thickness of PZT ceramic led to the increase of the bending stiffness of piezoelectric composite actuator but it did not always lead to the decrease of actuation distance according to the stacking sequences of piezoelectric composite actuator. Therefore, it is noted that the actuating performance of unimorph piezoelectric composite actuator is rather affected by bending stiffness than actuation distance.

• 대한기계학회논문집A
• /
• 제30권12호
• /
• pp.1543-1550
• /
• 2006

Since the performance of joints usually determines the structural efficiency of composite structures, an extensive knowledge of the behavior of adhesive joints and the related effect on joint strength is essential for design purposes. In this study, the torque capacity of adhesive joints was predicted using the combined thermal and mechanical analyses when the adherend was a composite tube. A finite element analysis was performed to evaluate residual thermal stresses developed in the joint, and mechanical s stresses in the adhesive were calculated including both the nonlinear adhesive behavior and the behavior of composite tubes. Three different joint failure modes were considered to predict joint failure: interfacial failure, adhesive bulk failure, and adherend failure. The influence of the composite adherend stacking angle on the residual thermal stresses was investigated, and how the residual thermal stresses affect the joint strength was also discussed. Finally, the predicted results were compared with experimental results available in literature.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.823-830
• /
• 2001

The single fiber pull-out technique has been commonly used to characterize the mechanical behavior of fiber/matrix interface in fiber reinforced composite materials. In this study, an improved analysis considering the effect of thermal residual stresses in both radial and axial directions is developed for the single fiber pull-out test. It is found to have the pronounced effects on the stress transfer properties across the interface and the interfacial debonding behavior.

• Steel and Composite Structures
• /
• 제38권5호
• /
• pp.563-582
• /
• 2021

The present study experimentally and analytically investigated the push-out behaviour of H-shaped steel section embedded in ultrahigh-performance fibre-reinforced concrete (UHPFRC). The effect of significant parameters such as the concrete types, fibre content, embedded steel length, transverse reinforcement ratio and concrete cover on the bond stress, development of bond stress along the embedded length and failure mechanism has been reported. The test results show that the bond slip behaviour of steel-UHPFRC is different from the bond slip behaviour of steel-normal concrete and steel-high strength concrete. The bond-slip curves of steel-normal concrete and steel-high strength concrete exhibit brittle behaviour, and the bond strength decreases rapidly after reaching the peak load, with a residual bond strength of approximately one-half of the peak bond strength. The bond-slip curves of steel-UHPFRC show an obvious ductility, which exhibits a unique displacement pseudoplastic effect. The residual bond strength can still reach from 80% to 90% of the peak bond strength. Compared to steel-normal concrete, the transverse confinement of stirrups has a limited effect on the bond strength in the steel-UHPFRC substrate, but a higher stirrup ratio can improve cracking resistance. The experimental campaign quantifies the local bond stress development and finds that the strain distribution in steel follows an exponential rule along the steel embedded length. Based on the theory of mean bond and local bond stress, the present study proposes empirical approaches to predict the ultimate and residual bond resistance with satisfactory precision. The research findings serve to explain the interface bond mechanism between UHPFRC and steel, which is significant for the design of steel-UHPFRC composite structures and verify the feasibility of eliminating longitudinal rebars and stirrups by using UHPFRC in composite columns.

• Journal of Mechanical Science and Technology
• /
• 제20권1호
• /
• pp.76-84
• /
• 2006

Arrayed ultrasonic sensors based on the piezoelectric thin film (lead-zirconate-titanate: Pb($Zr_{0.52}Ti_{0.48})O_{3}$) having composite membrane structure are fabricated. Different thermal and elastic characteristics of each layer generate the residual stress during the high temperature deposition processes, accomplished diaphragm is consequently bowing. We present the membrane deflection effects originated from the residual stress on the resonant frequencies of the sensor chips. The resonant frequencies ($f_r$) measured of each sensor structures are located in the range of $87.6{\sim}111\;kHz$, these are larger $30{\sim}40\;kHz$ than the resultant frequencies of FEM. The primary factors of $f_r$ deviations from the ideal FEM results are the membrane deflections, and the influence of stiffness variations are not so large on that. Membrane deflections have the effect of total thickness increase which sensitively change the $f_r$ to the positive direction. Stress generations of the membrane are also numerically predicted for considering the effect of stiffness variations on the $f_r$.

• 한국산학기술학회논문지
• /
• 제11권9호
• /
• pp.3148-3154
• /
• 2010

본 논문에서는 충격손상 복합재료의 피로수명 저하 특성과 이의 변동성을 통계적으로 분석하였다. 충격손상 복합재료의 잔류강도는 2모수 Weibull 분포에 잘 적합되었으며 충격에너지의 증가에 따라 잔류강도의 변동성은 감소 하였다. 복합재료의 피로수명은 충격손상에 의하여 크게 저하되었으며 또한 이의 피로수명에 대한 충격손상의 영향은 작용 응력진폭에 따라 변화함을 알 수 있었다. 또한 2모수 Weibull 분포를 이용하여 충격손상 복합재료의 피로수명의 변동성을 추정하였으며 충격에너지의 증강 및 응력진폭의 감소에 따라 피로수명의 변동성은 점차 감소하였다.

• Journal of Mechanical Science and Technology
• /
• 제18권2호
• /
• pp.221-229
• /
• 2004

In this work, an elastic-plastic stress analysis has been conducted for silicon carbide fiber reinforced magnesium metal matrix composite beam. The composite beam has a rectangular cross section. The beam is cantilevered and is loaded by a single force at its free end. In solution, the composite beam is assumed perfectly plastic to simplify the investigation. An analytical solution is presented for the elastic-plastic regions. In order to verify the analytic solution results were compared with the finite element method. An rectangular element with nine nodes has been choosen. Composite plate is meshed into 48 elements and 228 nodes with simply supported and in-plane loading condations. Predictions of the stress distributions of the beam using finite elements were overall in good agreement with analytic values. Stress distributions of the composite beam are calculated with respect to its fiber orientation. Orientation angles of the fiber are chosen as $0^{circ},\;30^{circ},\;45^{circ},\;60^{circ}\;and\;90^{circ}$. The plastic zone expands more at the upper side of the composite beam than at the lower side for $30^{circ},\;45^{circ}\;and\;60^{circ}$ orientation angles. Residual stress components of ${\sigma}_{x}\;and \;{\tau}_{xy}$ are also found in the section of the composite beam.

• 한국정밀공학회지
• /
• 제14권6호
• /
• pp.135-141
• /
• 1997

Low velocity impact test and compressive residual strength test after impact were performed by using Hercules AS4/3501-6[45/0/-45/90]$_{2s}$ laminated plate to investigate the low velocity impact damage behavior and the post-impact strength degradation on orthotropic composite laminate plate. Due to the lateral impact losd, the load path showed "" shape according to the laminate central deflection. Damage in a laminate occurs by inclined matrix crack at the damage initiation load stage and vertical matrix crack, occurs on the outer surface. Evaluating the compressive residual strength after the low velocty impact test, it could be found that there is a transient range where the compressive residual strength drop suddenly in the initial damage which is in the matrix crack range and the initial delamination area. is in the matrix crack range and the initial delamination area.

• 비파괴검사학회지
• /
• 제22권1호
• /
• pp.45-52
• /
• 2002

금속복합재료 (MMC) 내부에서의 강화재와 기지재사이의 열팽창계수의 차이에 의해 발생하는 인장잔류응력은 복합재료의 인장강도를 저하시키는 심각한 문제중의 하나이다. 따라서 본 연구에서는 TiNi/A16061 형상기억복합재료내부의 인장잔류응력의 문제를 해결하기 위하여 강화재로써 TiNi 합금을 사용하였다. TiNi 합금은 형상기억효과를 이용하여 복합재료내부에 압축잔류응력을 발생시킴으로써 인장강도를 증가시키는 역할을 한다. 복합재료내부에 압축잔류응력을 발생시키기 위하여 예변형(pre-strain)을 가하였다. 본 연구에서는 예변형의 변화에 따른 압축잔류응력의 영향을 평가하였으며 AE 기법을 이용하여 고온에서의 복합재료의 미시적 손상거동과 예변형의 영향을 평가하였다.