• 대기
• /
• 제20권4호
• /
• pp.415-426
• /
• 2010

A Land cover map over East Asian region (Kongju national university Land Cover map: KLC) is classified by using support vector machine (SVM) and evaluated with ground truth data. The basic input data are the recent three years (2006-2008) of MODIS (MODerate Imaging Spectriradiometer) NDVI (normalized difference vegetation index) data. The spatial resolution and temporal frequency of MODIS NDVI are 1km and 16 days, respectively. To minimize the number of cloud contaminated pixels in the MODIS NDVI data, the maximum value composite is applied to the 16 days data. And correction of cloud contaminated pixels based on the spatiotemporal continuity assumption are applied to the monthly NDVI data. To reduce the dataset and improve the classification quality, 9 phenological data, such as, NDVI maximum, amplitude, average, and others, derived from the corrected monthly NDVI data. The 3 types of land cover maps (International Geosphere Biosphere Programme: IGBP, University of Maryland: UMd, and MODIS) were used to build up a "quasi" ground truth data set, which were composed of pixels where the three land cover maps classified as the same land cover type. The classification results show that the fractions of broadleaf trees and grasslands are greater, but those of the croplands and needleleaf trees are smaller compared to those of the IGBP or UMd. The validation results using in-situ observation database show that the percentages of pixels in agreement with the observations are 80%, 77%, 63%, 57% in MODIS, KLC, IGBP, UMd land cover data, respectively. The significant differences in land cover types among the MODIS, IGBP, UMd and KLC are mainly occurred at the southern China and Manchuria, where most of pixels are contaminated by cloud and snow during summer and winter, respectively. It shows that the quality of raw data is one of the most important factors in land cover classification.

• 농촌계획
• /
• 제20권2호
• /
• pp.127-137
• /
• 2014

Self-sufficiency rate of food in South Korea is almost at the lowest level among OECD countries, and the decrease tend of farmland is expected to be continued. In this situation, the government has been revised the target self-sufficiency rate of food, and carried forward various policies in order to achieve it. One of those policies is the restoration business of idle farmland which is planned to carry forward after 2015. This study set up indicators evaluating effective use of idle farmland, and tried to apply in the field before carrying forward restoration business. The result of this study may be summarized as follows. First of all, it reset an evaluation indicator that was based on the evaluation indicator developed in order to set application directions of idle farmland. Next, it selected 30 idle farmlands with reset evaluation indicator among 11,635 which were inspected nationwide in 2012. Before applying indicator, it measured the condition of recycling such as accessibility of farmland, condition of irrigation and drainage system, land state, and surroundings by field investigation. Then, it calculated composite score in each target area through applying indicators, and verified the indicator by comparing calculated result with the one which was decided from field investigation. Finally, it carried out field investigation, correct and upgrade some problems of the standard of score calculation that was found during applying previously set evaluation indicator to target area, and established the final standard of calculation for evaluation indicator.

• Composites Research
• /
• 제12권4호
• /
• pp.42-54
• /
• 1999

섬유-금속 적층 복합재료(FMLC)는 섬유와 금속 박판으로 구성된 새로운 형태의 구조재로 가볍고 우수한 피로 특성을 가지며 금속과 같이 가소성과 충격저항성이 우수하고, 가공성이 뛰어나다. 본 연구에서는 여러 하중 조건하에 있는 섬유-금속 적층 복합재료를 유전자 알고리듬을 이용하여 최적 설계하였다. 전단변형이론에 근거한 유한요소법을 사용하여 적층판을 해석하였으며, 설계변수로 금속판의 강도와 섬유 층의 수에 따른 적층각도를 두었다. 섬유층과 금속판의 적합도 함수로는 각각 Tasi-Hill failure criterion과 Miser yield criterion을 사용하였다. 유전자 알고리듬의 연산자로는 토너먼트 선택과 균일 교배를 사용하였다. 효율적인 진화를 위해 엘리티스트 모델을 사용하며, 높은 정확도를 가진 해를 얻기 위해 크리프 무작위 탐색(creeping random search) 방법을 통해 더 우수한 자손을 얻었다. 여러 가지 하중 조건에 대하여 최적설계 결과를 나타내었으며, 파괴 지수 측면에서 탄소섬유강화복합재료(CFRP)와 비교하였다. 해석 결과 섬유-금속 적층 복합재료는 탄소섬유강화복합재료에 비하여 집중하중이나 분포하중 형태에 대하여 우수한 특성을 보였으며, 파괴 지수의 편차가 적어 예기치 않은 하중에 잘 견딜 것으로 사료된다.

• 자원ㆍ환경경제연구
• /
• 제27권2호
• /
• pp.339-362
• /
• 2018

본 논문에서는 국내 발전산업에 대한 비용함수를 추정하고 계수에 대한 시뮬레이션을 통하여 신재생에너지 투입 확대가 화석에너지 수요와 전력공급가격에 미치는 파급효과를 분석한다. 신재생에너지는 풍력, 태양광, 바이오, 연료전지, 수력 등 여러 에너지원을 통합한 개념으로서 산정방식의 일반화 문제와 자료의 제약 등의 이유로 각 에너지원의 상용 단가를 하나의 투입 가격으로 객관적으로 산정하는 것은 용이하지 않다. 이러한 현실적 한계를 고려하여 적정 수준의 신재생에너지 투입을 전제로 제약비용함수(restricted cost function)를 도출한 다음, 공급관계식(supply relation)을 결합하여 추정을 위한 방정식체계를 구성한다. 특히 신재생에너지의 암묵가격(shadow price)을 산출함으로써 신재생에너지 투입 확대로 인한 기업의 잠재적 비용부담의 변화추이를 분석한다.

• 한국산학기술학회논문지
• /
• 제18권11호
• /
• pp.637-643
• /
• 2017

본 연구는 기업설명회(Investor Relations; IR) 개최기업의 회계이익의 질을 검증하였다. 이를 위해 회계이익-과세소득 차이 변동성(Book-Tax Difference Variability) 정보를 회계이익의 질 대리변수(proxy)로 활용하여 실증분석을 실시하였다. 연구표본은 2011년부터 2016년까지의 12월 결산 유가증권 상장기업 중 금융업을 제외한 2,106개 기업연도이다. 실증분석 결과는 다음과 같다. 기업설명회 개최여부 및 개최횟수는 모두 회계이익-과세소득 차이 변동성과 음(-)의 관련성을 나타냈다. 또한 연구결과의강건성을 위해 기업설명회를 개최한 연구표본만을 대상으로 한 추가분석에서도 기업설명회 개최여부 및 개최횟수는 회계이익-과세소득 차이 변동성과 음(-)의 관련성을 나타냈다. 따라서 본 연구에 의하면 기업설명회를 개최하거나 더 자주 개최하는 기업일수록 회계이익의 질이 높을 것으로 기대할 수 있다. 본 연구는 기업설명회 개최기업의 회계이익의 질을 회계이익-과세소득 차이 변동성 정보를 통해 검증함으로써, 기업설명회 관련 선행연구를 확장하였다. 또한 본 연구가 건전한 자본시장의 발전에 도움이 되기를 기대한다.

• 대한치과교정학회지
• /
• 제41권2호
• /
• pp.121-126
• /
• 2011

Objective: The purpose of this study was to evaluate shear bond strength (SBS) and failure site location of brackets bonded to enamel with or without desensitizer application. Methods: Sixty-six freshly extracted human premolar teeth were randomly divided into 3 groups of 22. Group 1 served as the control. Desensitizer was applied to the remaining teeth at two time intervals (Group 2, bonded immediately after Pro-$Relief^{TM}$ (Colgate-Palmolive Co., New York, NY, USA) application and Group 3, bonded 30 days after Pro-$Relief^{TM}$ application with the teeth stored in artificial saliva during the 30 days). Orthodontic brackets were bonded with a light cure composite resin and cured with a halogen light. After bonding, the SBS of the brackets was tested using a universal testing device. Adhesive remnant index (ARI) scores were determined after the brackets failed. Data were analyzed with analysis of variance, Tukey's HSD, and G tests. Results: The SBS was significantly lower in Group 2 than in Groups 1 (p = 0.024) and 3 (p = 0.017). Groups 1 and Group 3 did not differ (p = 0.991). ARI scores did not differ significantly among groups. Conclusions: The Pro-$Relief^{TM}$ desensitizer agent applied immediately before bonding significantly reduces bond strength, but the SBS values still exceed the minimum 5.9 - 7.8 MPa required for adequate clinical performance. Immersing the teeth in artificial saliva for 30 days after applying the Pro-$Relief^{TM}$ desensitizer agent and before bonding increased the SBS to control levels.

• 디지털융복합연구
• /
• 제16권4호
• /
• pp.267-276
• /
• 2018

본 연구는 우울감있는 성인의 나이에 따른 자살생각에 영향을 주는 요인을 파악하여 자살시도를 사전에 예방하기 위한 간호중재 시 기초자료를 제공하고자 시도되었다. 본 연구대상자는 보건복지부와 질병관리본부에서 시행한 2013-2015년도 국민건강영양조사 대상자 총 15,568명 중 '2주 이상 연속 우울감 여부' 문항에 '있음'으로 명확하게 응답한 30세 이상 1,202명을 대상으로 하였다. IBM SPSS 23.0 프로그램을 이용하여 복합표본계획파일을 생성한 후 가중치를 부여하여 분석하였으며, 유의수준은 .05로 하였다. 본 연구결과는 다음과 같다. 자살생각에 유의한 영향을 준 요인으로는 소득(50-60대), 가구원수(50-60대), 결혼상태(40-50대), 주관적 건강(30-50대, 70대 이상), 스트레스(30대, 50대 이상), 경제활동상태(50대), 당뇨(60대 이상), 음주량(60대), BMI(40대)로 나타났다. 따라서, 자살예방 계획 및 중재 시 대상자의 일반적 건강관련 요인들을 고려한 맞춤식 중재가 필요하다.

• 대한가정학회지
• /
• 제25권3호
• /
• pp.15-26
• /
• 1987

The purpose of this study was to develop the pattern drafting method which would be suitable to their physical characteristics for the fatty body of 40∼55 aged Korean women who are more than 1.5 Rohrer's Index and 90㎝ bust girth. The study was composed as follows; 1. Body measurement and statistical analysis: One hundred and thirty women were measured on 29 items. Thirty-four items including 29 measured items and 5 calcutated items were analyzed statistically. 1) Mean, standard deviation, variance, maximum, minimum, range were computed. 2) Correlation coefficients between each items were computed. 2. Development of new bodice pattern drafting method: Measurement items necessary to draft new bodice pattern were bust girth, center back waist length, shoulder width, back width, chest and neck base girth. The new pattern was examined through three wearing tests for completion. 3. Evaluation of the new pattern drafting method: The new pattern was objectively evaluated by the sensory test. The sensory evaluation was applied to evaluate the new pattern for the fatty body women by comparint it with the conventional patterns. The results of sensory tests of the new pattern are as follows: 1) The composite reliability coefficient is 0.7698, and the reliability of sensory test shows high. 2) According to a statistical analysis of the result of the 23 items on the questionaire, all the items showed significant differences(α 0.01) between the two, with the new pattern having higher scores. The new pattern is better conventional pattern as the average mark of the former is 3.901 but that of latter is 2.926. The new pattern drafting method proved to be superior to the conventional one especially in the fitness at the center front neck point, shoulder point, side line, armscye depth, position of bust point, chest width line, under arm dart and the shoulder line.

• 한국통신학회논문지
• /
• 제24권8A호
• /
• pp.1107-1114
• /
• 1999

본 논문에서는 대수정규 쉐도잉(shadowing)과 나카가미(Nakagami) 페이딩을 함께 받은 타 시스템의 동일 채널 간섭파가 불완전 전력제어 된 DS/CDMA 셀룰러 시스템의 용량에 미치는 영향을 분석하였다. 분석에는 먼저 간섭을 고려하지 않고 불완전 전력제어만을 해석한 Prasad와 Jansen의 결과와 비교하였으며, 대수정규-나카가미 페이딩을 받은 다중 간섭은 Schwartz와 Yeh가 제시한 방법을 적용하여 DS/CDMA 시스템에 미치는 영향을 오수신확률로 유도하였다. 유도한 오수신확률에 대해 불완전 전력제어, 페이딩 지수, 처리이득, 전력비, 간섭수, 음성화율 등을 파라미터로 하여 각각의 상황에서 DS/CDMA 시스템의 가입자 용량 감소를 분석하였다. 결과로부터 DS/CDMA 시스템의 용량은 전력제어 오차와 간섭파의 증가에 매우 민감하여 전력제어 오차가 클수록, 무선채널 환경의 페이딩이 심할수록, 또한 간섭파의 수가 증가할수록 감소하였다.

• Structural Engineering and Mechanics
• /
• 제22권6호
• /
• pp.665-683
• /
• 2006

The strength behaviors of Fiber Reinforced Plastics (FRP) Composites can be greatly influenced by the properties of constitutive materials, the laminate structures, and load conditions etc, accompanied by many uncertainty factors. So the reliability study on FRP is an important subject of research. Many achievements have been made in reliability studies based on the probability theory, but little has been done on the roles played by fuzzy variables. In this paper, a fuzzy reliability model for FRP laminates is established first, in which the loads are considered as random variables and the strengths as fuzzy variables. Then a numerical model is developed to assess the fuzzy reliability. The Monte Carlo simulation method is utilized to compute the reliability of laminas under the maximum stress criterion. In the second part of this paper, a generalized fuzzy reliability model (GFRM) is proposed. By virtue of the fact that there may exist a series of states between the failure state and the function state, a fuzzy assumption for the structure state together with the probabilistic assumption for strength parameters is adopted to construct the GFRM of composite materials. By defining a generalized limit state function, the problem is converted to the conventional reliability formula that enables the first-order reliability method (FORM) applicable in calculating the reliability index. Several examples are worked out to show the validity of the models and the efficiency of the methods proposed in this paper. The parameter sensitivity analysis shows that some of the mean values of the strength parameters have great influence on the laminated composites' reliability. The differences resulting from the application of different failure criteria and different fuzzy assumptions are also discussed. It is concluded that the GFRM is feasible to use, and can provide an effective and synthetic method to evaluate the reliability of a system with different types of uncertainty factors.