• KIEAE Journal
• /
• 제3권4호
• /
• pp.15-22
• /
• 2003

Open housing is an emerging, new concept in housing development that combines demand-orientation with environment-friendliness. Its methodology, however, has not been analyzed in a systematic way. In this study, the features of planning method in open housing were analyzed to systematize types of the planning method. The existing planning methods of open housing was reviewed and they can be classified into three approaches such as pattern, module and organization planning. Given three approaches, the existing planning methods of open housing can be sub-classified as follows; free and patterned planning by patterns, modular and non-modular planning by modules, and hierarchical and non-hierarchial planning by organizations. The framework for the typological analysis was made based on the classification and a composite typological system was drawn from the analysis of the existing planning features. The suggested classification of features in open housing is expected to contribute to the clear definition of characteristics on open housing to provide a basis for the concrete realization method, to analyzing problems with the existing planning methods and to providing their solutions.

• Journal of Construction Engineering and Project Management
• /
• 제2권4호
• /
• pp.32-41
• /
• 2012

In recent times, multi-centralization and decentralization as well as large Capital area and suburbanization in the spatial structure of capital area. With rapid growth, urbanization and industrialization are unsystematic, and growth inequality between regions caused negative effects such as discordant centralization and decentralization, fluctuating land value, and gap between living conditions. Accordingly, this study analyzed urban spatial indexes by the self-governed body in the capital area such as Seoul, Incheon, and Gyeonggi province for the analysis of the regional inequality phenomenon. We examined the characteristics of temporal and spatial changes in urban spatial structure in the capital area by utilizing the distribution pattern and density of city indexes such as population, employment, etc, and then drew the commonality of those factors through factor analysis. We evaluated the drawn results through the city standard index by each city, conducted factor score analysis, and identified the interaction between each factor and Housing Purchase Price Composite Indices index, housing rent price index(Housing Jeonse Price Composite Indices), land price fluctuation rate, diffusion ratio of house, and financial independence.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.247-248
• /
• 2018

In order to secure the variability of long-life housing, dry walls are used. The composite gypsum board panel is the most frequently used infill system for the wall, and it is an excellent construction method in terms of constructability and economic feasibility. However, there are also problems such as the destruction of Ondol pipes at the bottom floor and being unable to fix the light weight steel frame (M-bar) when a variable composite gypsum board panel is used. To solve such problems, a wall with a method of fixing only the top part without fixing the bottom floor is developed, but it is difficult to identify the durability of ceiling frame according to the tensile force of stud and the safety according to the Stiffness and impact resistance (soft body) of ceiling frame. Therefore, this study verified the effectiveness of infill system for the wall by conducting experiment on the stiffness and impact resistance of composite gypsum board panel according to the reinforcement of ceiling frame (wooden frame, double saw-toothed bracket, Cross M-bar). As a result, it was possible to secure the safety of wooden frame while the impact resistance and the Stiffness of double saw-toothed bracket and cross M-bar were not secured.

• 한국융합학회논문지
• /
• 제13권4호
• /
• pp.331-337
• /
• 2022

전기자동차용 배터리 하우징 소재로 사용되고 있는 금속 소재에서 경량소재로 대체하기 위한 열가소성복합재료를 제조하였다. 매트릭스 소재는 고분자 소재인 나일론 6를 사용 하였으며 방열 성능을 부여하기 위해 열전도도가 높은 Boron Nitrate(BN)를 사용하였다. 동일한 필러의 함량 및 입자 크기에 따른 열전도성 고분자 복합재료의 방열 특성을 분석하였다. 필러의 함량이 증가할수록 열전도도 값이 증가하였으며, 입자크기가 60~70㎛인 BN의 함량이 50%인 복합재료의 경우 1.4W/mK 이상 열전도도를 나타내었다. 입자 크기가 클수록 입자 간 계면 접촉면이 넓어져 Thermal path가 이루어짐을 확인하였다. 제조된 열전도성 고분자복합재료를 이용하여 배터리 하우징을 제작하였으며 셀의 충방전 동안 온도 변화를 관찰하여 배터리 하우징의 대체 소재로서의 가능성을 확인하였다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.238-241
• /
• 2003

최근 들어 건설기업들은 경쟁적으로 주택 브랜드들을 개발하여 활발한 브랜드 마케팅 투자를 하고 있다. 브랜드 자산의 중요성은 현실적으로 증대되고 있으며, 강한 브랜드를 만들기 위해서는 브랜드 관리가 전재되어야 하는 시기이다. 하지만 지금까지의 브랜드 자산 관리는 주로 제조업이나 서비스업의 제품들을 대상으로 이루어지고 있으며, 건설기업들의 주택 브랜드 자산 관리에 관한 논의는 미비하다. 브랜드 자산의 중요성을 인식하면서도 주택 브랜드 자산 관리 방법의 부재로 인해 브랜드 마케팅 투자의 지표가 되는 근거를 제시하지 못하고 있는 실정이다. 따라서 본 연구에서는 브랜드 파워 조사를 통해 자산 구성 요소별 중요도를 산출하고, 이를 바탕으로 주택 브랜드 관리 전략에 관한 기반을 제공하고자 한다.

• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.252-262
• /
• 2019

2016년 경주 지진에 이어 2017년 포항 지진까지 발생한 대한민국은 더 이상 지진에 대해 안전지대라고 할 수 없다. 이에 따라 재난환경에 적합한 피난시설의 필요성이 증대되고 있다. 본 연구에서는 경량 복합패널을 이용하여 기존 피난시설의 단점들을 보완할 수 있는 구호주거를 제작하고자 하였다. 이를 위해 경량 복합패널로 구성된 구호주거에 대한 구조 성능과 에너지성능을 평가하고자 하였다. 구호주거의 구조 성능을 평가하기 위해 경량 복합패널로 제작한 시스템에 대한 횡하중가력 실험을 진행하였다. 실험체는 접합 방식을 변수로 하여 2가지로 구성하였다. 또한 KBC 2016에 따라 실험체에 대한 지진하중과 풍하중을 산정하여 실험 결과와 비교하였다. 에너지성능은 냉난방 및 조명에너지 사용량을 최소화하기 위해 기준 패널을 활용한 남측창호 최적화기법을 활용하여 분석하였고, 창면적비, 창 총일사취득율 최적화를 진행하였다. 결과적으로 경량 복합패널로 제작된 실험체는 횡하중에 대해 충분히 안전한 성능을 보일 것으로 판단되며, 창면적비 0.38, 총일사취득율 0.5수준의 최적화 계획을 통한 저에너지 운용이 기대된다.

• 한국주거학회논문집
• /
• 제22권3호
• /
• pp.101-111
• /
• 2011

This study was conducted to investigate the indiscriminate development occuring as a result of high-density land use per lot in residential areas of Seoul, which mainly consist of detached houses. The primary goals of this study were: (1) to suggest a block unit development method as an alternative architectural method of the current uniform development, in which high-rise and high-density apartments are usually built; and (2) to check the feasibility of the suggested method. Based on the analyses of the existing block composition types of residential areas, the prerequisite planning indices for applying a collective housing model were investigated. Subsequent to applying a collective housing type within each unit block, the collective housing model was analyzed. The results of the analyses showed that indiscriminate development was rampant in detached urban houses areas, and more than 70% of the buildings constructed before the 1980s needed re-development. The feasibility of the models was investigated depending on the models of low-rise and high-density collective housing, which utilize various block arrangements such as the court type, linear type, villa type, and composite type. The results of this study showed that the newly applied low-rise and highdensity multiple dwelling housing model in urban individual residential area significantly contributed to creating a good living environment in terms of both physical and psychological aspects.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.219-223
• /
• 2005

In this work, a hybrid composite proceeding bearing (HCJB) composed of carbon/phenolic laminated composite bush and steel housing was designed for marine vessels because the composite proceeding bearing reduces the possibility of the seizure problem between the proceeding and bearing. The two components of bearing were assembled by interference fit joining method and a series of durability tests were conducted using the laboratory bench with the lubricants of SAE 30 oil, water, and sea water. That the HCJB was found reliable under the interference fitting loads and environmental temperature change.

• KIEAE Journal
• /
• 제11권6호
• /
• pp.43-51
• /
• 2011

This study aims to analyze on the change status in the project plan of the housing complex as evaluated through the Housing Performance Grading Indication System. This a a system for assessing quantitatively the comprehensive, unified performance of housing by an objective standard from the design stage since January 9, 2006. As housing is a composite with various performances, it is required necessary to objectively assess the various performances from the design stage for building better housing. Thus, this study analyzed the change status and objectively described objectively it centering on the construction and structure drawings for 12 items posted in the Facility Management System_(FMS) out of examples recognized by 2011 since the implementation of the system. The changes were analyzed though observing each performance item-specific characteristics and confirming the books approved for use. In various parts, such as the site area, landscape plan, plane plan for unit, supplementary welfare facility plan, finishing materials, window size and location, the project plan was changed. These changes may result in a grading change in of the performance items of the system. This study purpose is for it to be used as a basic resource required for future system development by supplementing the limitation of the design phase and then through playing a basic role for the assessment after completion.

• Steel and Composite Structures
• /
• 제46권2호
• /
• pp.237-252
• /
• 2023

The article describes the development of a novel dissipative bracing connection device (identified by the acronym DRBrC) for concentrically braced frames in steel and composite structures. The origins of the device trace back to the seminal work of Kelly, Skinner and Heine (1972), and, more directly related, to the PIN-INERD device, overcoming some of its limitations and greatly improving the replaceability characteristics. The connection device is composed of a rigid housing, connected to both the brace and the beam-column connection (or just the column), in which the axial force transfer is achieved by four-point bending of a dissipative pin. The experimental validation stages, presented in detail, consisted of a preliminary testing campaign, resulting in successive improvements of the original device design, followed by a systematic parametric testing campaign. That final campaign was devised to study the influence of the constituent materials (S235 and Stainless Steel, for the pin, and S355 and High Strength Steel, for the housing), of the geometry (four-point bending intermediate spans) and of the loading history (constant amplitude or increasing cyclic alternate). The main conclusions point to the most promising DRBrC device configurations, also presenting some suggestions in terms of the replaceability requirements.