• Earthquakes and Structures
• /
• 제22권1호
• /
• pp.1-13
• /
• 2022

When a building suffers damages under moderate to severe loading condition, its physical properties such as damping and stiffness parameters will change. There are different practical methods besides various numerical procedures that have successfully detected a range of these changes. Almost all the previous proposed methods used to work with translational components of mode shapes, probably because extracting these components is more common in vibrational tests. This study set out to investigate the influence of using both rotational and translational components of mode shapes, in detecting damages in 3-D steel structures elements. Three different sets of measured components of mode shapes are examined: translational, rotational, and also rotational/translational components in all joints. In order to validate our assumptions two different steel frames with three damage scenarios are considered. An iterative model updating program is developed in the MATLAB software that uses the OpenSees as its finite element analysis engine. Extensive analysis shows that employing rotational components results in more precise prediction of damage location and its intensity. Since measuring rotational components of mode shapes still is not very convenient, modal dynamic expansion technique is applied to generate rotational components from measured translational ones. The findings indicated that the developed model updating program is really efficient in damage detection even with generated data and considering noise effects. Moreover, methods which use rotational components of mode shapes can predict damage's location and its intensity more precisely than the ones which only work with translational data.

• 한국의상디자인학회지
• /
• 제19권4호
• /
• pp.17-27
• /
• 2017

This study analyzes the trends of photo image components and forms of expression in global fashion advertising photos. First, photo image components are classified into seven categories: location (indoor-outdoor), the model's movement, pose, facial expression, gender, race and number of models. The forms of expression are classified into six categories: direct expression, sensual expression, symbolic expression, storytelling expression, dramatic expression, and sexual expression. With the aforementioned classifications, the trends were studied for three years from 2013 to 2015. The analysis result indicates the following: for the details of photo image components, the portion of indoor photos, static poses and conscious facial expressions was over 60% of the total for every season of the 3 years, while there was a slight increase in the number of models and the diversity of races. For the forms of expression, the sensual expression showed the largest portion accounting for over 50% of the total, followed by direct expression and storytelling expression. The findings from this study show that the trends of photo image components and forms of expression in global fashion advertisements are changing. Therefore, domestic companies will need to develop photo image components and forms of expression in line with the changing global fashion advertisement trends.

• 한국안전학회지
• /
• 제30권4호
• /
• pp.32-38
• /
• 2015

In this paper, we analyzed the vehicle fire accidents due to damage of vehicle's electrical components, which is applied to a vehicle. In recent development of electrical components technology, approximately 40% of vehicle manufacturing parts have applied electronic circuit technology. Phenomenon such deterioration of insulating performance or electric breakdown on the vehicle's electrical components and printed circuit boards(PCBs) resulted from moisture, contamination and aging due to repetitive operations, lead to the vehicle fire. Therefore, the application of electrical components with adequate electric capacity for vehicle and usage of molding techniques using a non-combustible materials to shut off the oxygen should be applied in order to prevent vehicle fire due to damage of the electrical components and PCBs.

• 한국CDE학회논문집
• /
• 제9권4호
• /
• pp.373-381
• /
• 2004

Using standard components of a press die is recognized as a way for a cost reduction and a short lead time. It also provides a way for a quick maintenance of a die under repair. It is expected to contribute to integration of CAD/CAM system for manufacturing dies in the future. This paper presents a 3D CAD library which is constructed using the standard components and is used for designing a press die. This 3D CAD library is generated by a database system made of Microsoft Access for standard components and by CATIA V5 R10 API for geometric features. The library is implemented using Visual Basic 6.0 utility of CATIA API function in the Windows NT environment. It creates a 3D model of the standard components of press die easily when a die designer inputs numerical values of geometric features and the BOM of the completely assembled parts. It also generates automatically the assembly drawing of die set by using variables for standard values of die parts. Therefore users can save the cost of time to design the press die components, and even a beginner can use this program with ease. The test results of the 3D CAD library for designing shearing and bending dies verify its usefulness and feasibility.

• 한국약용작물학회지
• /
• 제12권2호
• /
• pp.102-107
• /
• 2004

This study was carried out to establish an optimum method for identifying the volatile components of Magnolia ovobata Thunb. using the dynamic headspace (Purge & Trap) and simultaneous distillation and extraction (SDE) method. Between the two different identification analysis, the volatile components were more easily detected in the SDE than the Purge & Trap method. Among the identified volatile components, the 12 compounds were detected to have similar retention times and match quality within the 45 minutes in both identification methods. The maximum values of the major volatile components were detected differently by SDE and (Purge & Trap) method such as ${\alpha}-pinene$ (3.4, 18.2%), ${\beta}-pinene$ (3.5, 10.3%), l-limonene (5.2, 15.4%). These results indicated that the Dynamic Headspace (Purge & Trap) was much more reliable method for identifying the volatile components of Magnolia ovobata Thunb. as compared to the SDE method.

• 한국보건간호학회지
• /
• 제13권2호
• /
• pp.12-25
• /
• 1999

This study examines individual determinants of hospital days in community-dwelling elders by estimating a linear structural equation model based upon Andersen's behavioral model. Data were collected through a national survey of elders in Korea in 1994. The subjects for this secondary data analysis were 1687 non-institutionalized elders aged 60 years or older. Except for the effect of age and gender on family help. the predisposing components had direct effects on the enabling components. Of the effects of the enabling components. family help had a direct effect on self-evaluated health; economic status had a direct effect on chronic disease and self-evaluated health; and access had a direct effect on chronic disease. functional health status and self-evaluated health. Of the enabling components. residence and family help directly affected hospital days. Self-evaluated health revealed the greatest direct effect on hospital days followed by functional health. Overall. the effects of the predisposing components and the enabling components on hospital days were not prominent. Since the model explained only $4\%$ of the variance in hospital days. the magnitude of the effect of the need components cannot be judged in terms of equity of distribution of health services. In particular. the effect of family help in the model reveals the importance of family support in health management of elders. The implications of these analyses for improving the proposed model of hospital days were discussed.

• 품질경영학회지
• /
• 제42권2호
• /
• pp.235-251
• /
• 2014

Purpose: To develop efficient PL response system, SMEs should decide which component of PL response system is important and implemented with priority under limited resources. To accomplish this goal, we propose strategic priority components of PL response system for SME manufacturer. Methods: We categorize the components of PL response system based on prior research results - System, Organization, Training, Technology, Cost, and Awareness. AHP (Analytic Hierarchy Process) is applied to extract important components of PL response system, which is used in assigning the priority of component. To analyze effects of each components, performance sensitivity analysis is applied. Results: The survey analysis results show Technology is the most important components. Organization and Cost component are follows. As the importance of Technology is changed, we can find Organization, Cost is second and third important components. Conclusion: Our research shows Technology which is related to make a safe product with systematic process, is a basic enabler of PL response system. Also, building a PL team and securing a budget for PL activity should be carry out with limited resources.

• 한국정밀공학회지
• /
• 제2권2호
• /
• pp.43-59
• /
• 1985

In relation to the machinability of drilling operation, experiments were made to investigate the effect of cutting condition on static as well as dynamic cutting resistances in cutting plane carbon steel (SM 45 C) with H.S.S. twist drills. The results were as follows. 1) The static cutting resistances on carbon steel can practically be calculated by the following equations which were derived from experimental result. The deviation from the experimental values was less than 8% and 13% for cutting torque and thrust respectively. For cutting torque M: M=0.019 $H_B\;{f^{0.68}d^{1.68}$ For thrust T: T=0.400406 $r^{0.6}d^{0.68}$ + 0.1835 $H_BC^2$(where $H_B$: Brinnel hardness) 2) The static components of cutting resistance are increased exponentially with increasing drill diameter and feed rate. On the effect of drill diameter, the dynamic components of torque are decreased with increasing dirll diameter because of rigidity, the dynamic components of thrust being not effected with the changes. 3) As feed rates increase, the dynamic components of torque rather decrease although its changes on thrust components are unstable. 4) The static components of cutting resistance and dynamic component of torque are slightly decreased in accordance with the increase of spindle speed although its dynamic thrust components are not effected by the spindle speed.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1422-1431
• /
• 2015

The reliability of power system components can be affected by a numbers of factors such as the health level of components, external environment and operation environment of power systems. These factors also affect the electrical parameters of power system components for example the thermal capacity of a transmission element. The relationship of component reliability and power system is, therefore, a complex nonlinear function related to the above-mentioned factors. Traditional approaches for reliability assessment of power systems do not take the influence of these factors into account. The assessment results could not, therefore, reflect the short-term trend of the system reliability performance considering the influence of the key factors and provide the system dispatchers with enough information to make decent operational decisions. This paper discusses some of these important operational issues from the perspective of power system reliability. The discussions include operational reliability of power systems, reliability influence models for main performance parameters of components, time-varying reliability models of components, and a reliability assessment algorithm for power system operations considering the time-varying characteristic of various parameters. The significance of these discussions and applications of the proposed techniques are illustrated by case study results using the IEEE-RTS.

• 한국작물학회지
• /
• 제44권3호
• /
• pp.181-185
• /
• 1999

To compare the composition of volatile flavor components of three different cultivars of rice, Hyangnambyeo (aromatic cultivar), Heugjinjubyeo (pigmented cultivar) and Dongjinbyeo (normal cultivar), the volatile flavor components of brown rice were isolated by Likens-Nickerson simultaneous steam distillation and extraction apparatus. The flavor concentrates obtained were analyzed by gas chromatography and gas chromatography-mass spectrometry. A total of 65 components, including 14 aliphatic aldehydes and ketones, 7 aliphatic alcohols, 8 aromatic alcohols, 13 hydrocarbons, 9 esters, 7 aliphatic acids, and 7 miscellaneous components were identified. The aliphatic aldehydes, which are known as contributors to the overall flavor of cooked rice, were present in larger amounts in Hyangnambyeo than in Heugjinjubyeo and Dongjinbyeo, while the difference in quantity of these components between Heugjinjubyeo and Dongjinbyeo was not remarkable. Hyangnambyeo and Heugjinjubeyo contained 562 ng and 259 ng of 2-acetyl-1-pyrroline per gram of brown rice based on dry weight, respectively, which is a key compound contributing to the popcorn-like aroma in aromatic rice. Dongjinbeyo contained about 6 ng.