• Journal of Energy Engineering
• /
• v.27 no.4
• /
• pp.98-102
• /
• 2018

In order to improve the durability of components in the vehicle engine room, an experiment to improve the air cooling effect of components by installing a cooling duct using intake air aiming at four components, such as generator, battery, ECU and power steel oil, Respectively, experimental results show that the overall component temperature has been reduced, and the reduced temperature difference is in the order of generator, ECU, power steel oil and battery. In order to improve the temperature difference due to these components, it is necessary to optimize the design through the flow analysis in the duct in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.801-808
• /
• 2018

The learning of the linear regression model is stable on the assumption that the sample size is sufficiently larger than the number of explanatory variables and there is no serious multicollinearity between explanatory variables. In this study, we investigated the difficulty of model learning when the assumption was violated by analyzing a real heavy rain damage data and we proposed to use a principal component regression model or a ridge regression model after integrating data to overcome the difficulty. We evaluated the predictive performance of the proposed models by using the test data independent from the training data, and confirmed that the proposed methods showed better predictive performances than the linear regression model.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.35.3-36
• /
• 2018

One of the most prevalent knowledge about disk galaxies, which dominate the population of the local Universe, is that they consist of stellar structures with different kinematics, such as thin disk, bulge, and halo. Therefore, investigating when and how these components develop in a galaxy is the key to understanding the evolution of galaxies. Using the NewHorizon simulation, we can resolve the detailed structures of galaxies, in the field environment, from the early Universe where star formation and mergers were most active. We first decompose stellar particles in a galaxy into a disk and a dispersion-dominated, spheroidal, component based on their orbits and then see how these components evolve in terms of mass and structure. At high redshift z~3, galaxies are mostly dispersion-dominated as stars are formed misaligned with the galactic rotational axis. At z=1~2, massive galaxies start to dominantly form disk stars, while less massive galaxies do much later. Furthermore, massive galaxies are forming thinner and larger disks with time, and the preexistent disks are heated or even disrupted to become a part of dispersion-dominated component. Thus, the mass growth of spheroidal components at later epochs is dominated by disrupted stars with disk origins and accreted stars at large radii.

• Journal of Internet Computing and Services
• /
• v.20 no.2
• /
• pp.69-76
• /
• 2019

Recent Enterprise System has component driven real-time distributed architecture (RDA) and this kind of architecture should performed with satisfying strict constraints on life cycle of object and response time such as synchronization, transaction and so on. Microsoft's .NET platform supports RDA and is able to implement services including before mentioned time restriction and security service by only specifying attribute code and maximizing advantages of OMG's Model Driven Architecture (MDA). In this study, a method to automatically generate an extended model of essential elements in an enterprise-system-based RDA as well as the platform specific model (PSM) for Microsoft's .NET platform are proposed. To realize these ideas, the functionalities that should be considered in enterprise system development are specified and defined in a meta-model and an extended UML profile. In addition, after defining the UML profile for .NET specification, these are developed and applied as plug-ins of the open source MDA tool, and extended models are automatically generated using this tool. Accordingly, by using the proposed specification technology, the profile and tools can easily and quickly generate a reusable extended model even without detailed coding-level information about the functionalities considered in the .NET platform and RDA.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.5
• /
• pp.837-855
• /
• 2020

This study develops a business ethics education program and verifies its effects through the implementation of a program for fashion companies. Questionnaires obtained from 161 fashion companies were submitted for an analysis of the education needs of business ethics components using the Borich's Needs Assessments Model and the Locus for Focus model. The business ethics component in the highest rank of the education need was 'promoting social contribution (PSC)'. An education program of PSC was developed based on the problem-based learning method and was implemented for 180 minutes on the CEOs or managerial board members of eleven fashion companies. Education participants showed an improvement in the perceptions of the business ethics component after the education seminar. The self-efficacy and the education effect perceived by participants were maintained 70 days after education. This study is meaningful to gain an empirical evidence of the positive effect of business ethics education implemented on the practitioners of fashion companies. The results will provide a knowledge base and a guideline for business ethics education in the fashion industry.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.1
• /
• pp.35-43
• /
• 2022

This study aims to analyze the physical properties of non-woven fabric sheets, which continue to grow in the cosmetic market. Non-woven fabric sheets were used as specimens, and a total of 17 samples were analyzed. To evaluate the physical properties of the non-woven fabric sheet, the weight, tensile strength, surface properties, free swell absorption, and wet stiffness were tested. Through the results itw was determined that non-woven fabric sheets for mask packs should be manufactured considering fiber arrangement so that the weight is 40 g/m², and the tensile strength should be maintained near 12 kgf. In addition, it was confirmed that the material selection and process conditions should be adjusted so that the free swell absorption is at least 8 g/g, and the wet stiffness is 200 mg. Therefore, since the non-woven fabrics for the mask sheets can be used in various products depending on fabric composition, this study will be expected to be basic data for the continuous growth of the sheet-type mask packs coming to market.

• Steel and Composite Structures
• /
• v.42 no.2
• /
• pp.161-172
• /
• 2022

In this paper, four specimens of CFST column joints with endplates and long bolts are tested in the scenario of progressive collapse. Flush endplate and extended endplate are both adopted in this study. The experimental results show that increasing the thickness of the endplate could improve the behavior of the joint, but delay the mobilization of catenary action. The thickness of the endplate should not be relatively thick in comparison to the diameter of the bolts, otherwise catenary action would not be mobilized or work effectively. Effective bending deformation of the endplate could help the formation and development of catenary action in the joints. The performance of flexural action in the joint would affect the formation of catenary action in the joint. Extra middle-row bolts set at the endplates and structural components set below the bottom beam flange should be used to enhance the robustness of joints. A special weld access hole between beam and endplate should be adopted to mitigate the chain damage potential of welds. It is suggested that the structural components of joints should be independent of each other to enhance the robustness of joints. Based on the component method, a formula calculating the stiffness coefficient of preloaded long bolts was proposed whose results matched well with the experimental results.

• The Journal of Asian Finance, Economics and Business
• /
• v.10 no.2
• /
• pp.73-82
• /
• 2023

The study aims to evaluate the impact of corporate social responsibility on customers' repurchase intention in Vietnam's fast-moving consumer goods (FMCG) industry. This study employs primary data surveyed from 417 Vietnamese consumers, and the sample is selected based on the willingness to participate in providing information. The results show corporate social responsibility's positive impact on repurchase intention in the FMCG industry in the Vietnam market. There are three components of corporate social responsibility, including ethical responsibility, legal responsibility, and economic responsibility have a positive impact on repurchase intention. The economic responsibility component has the greatest effect on repurchase intention. There is not enough statistical basis for the philanthropic responsibility component of corporate social responsibility to recognize its impact on repurchase intention. The findings of this study suggest that companies dealing in the FMCG industry in Vietnam need to invest more in further developing their corporate social responsibility, it not only helps to improve their customer loyalty to businesses but also contributes to promoting the country's economic and social development in a better and more sustainable direction.

• Journal of the Korean Society of Systems Engineering
• /
• v.17 no.2
• /
• pp.23-36
• /
• 2021

Recently, the rapid development of drones is increasing as a variety of threats to important facilities of the country. In order to build an anti-drone system that responds to drones with high technical characteristics, standardization is required in terms of operation, system, and technology. By applying the defense architecture framework, it contributes to the establishment of the optimal system by proposing a standardization plan for the operational and system perspectives of the anti-drone system by creating outputs equivalent to the stage of prior research on weapons systems. It is a prerequisite for building a drone system the operational concept of the anti-drone system, the definition of the drone threat, the function of each component, the interface, the definition of data flow, the system performance and effect scale, etc. Management, security officers, and equipment manufacturers of important national and public facilities on site expect that it will be used as an objective standard at the government level for the component technology of the equipment to respond to the drone threat and the performance required in the environment.

• Journal of ILASS-Korea
• /
• v.26 no.4
• /
• pp.212-218
• /
• 2021

The present study aims to develop the Surface Plasmon Resonance (SPR) imaging system facilitating the real-time measurement of the concentration of evaporating binary mixture droplet (BMD). We introduce the theoretical background of the SPR imaging technique and its methodology for concentration measurement. The SPR imaging system established in the present study consists of a LED light source, a polarizer, a lens, and a band pass filter for the collimated light of a 589 nm wavelength, and a CCD camera. Based on the Fresnel multiple-layer reflection theory, SPR imaging can capture the change of refractive index of evaporating BMD. For example, the present study exhibits the visualization process of ethylene glycol (EG)-water (W) BMD and measures real-time concentration change. Since the water component is more volatile than the ethylene glycol component, the refractive index of EG-W BMD varies with its mixture composition during BMD evaporation. We successfully measured the ethylene glycol concentration within the evaporating BMD by using SPR imaging.