• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1187-1191
• /
• 2011

In this paper, the development of an adjustable load limiter is presented, which is a component of the seat belt. The adjustable load limiter is loaded at different levels for varied weights and heights of occupant. The recent regulation FMVSS 208 demands strict safety standards for different percentiles of dummy size. In this work, high- and low-level load conditions are proposed according to dummy scale and thoracic injury criteria. The suggested load conditions were verified by performing a sled test using the benchmark model. A dual-level load limiter has been developed on the basis of these tests. Experiments were conducted on the product performance, and finite element analysis was carried out; the results confirmed the points for improvement.

• International Journal of Aeronautical and Space Sciences
• /
• v.6 no.2
• /
• pp.84-96
• /
• 2005

Helical tip vortex is known as stable vortex structure, however the specific frequency component of far wake perturbation induces the vortex pairing in hover and axial flight. It is expected that the tip vortex pairing phenomena may happen in transition flight and very low advance ratio flight so that inflow may be most nonuniform in the low advance ratio flight. The objectives of this paper are that a tip-vortex instability during the transition from hover into very low advance ratio forward flight is numerically predicted to understand a physics by using a time-marching free-wake method. To achieve the objectives, numerical method is firstly validated in typical axial and forward flights cases. Present scheme with trim routine can predict airloads and inflow distribution of forward flight with good accuracy. Then, the transition flight condition is calculated. The rotor used in this wake calculation is a small-scale AH-1G model. By using a tip-vortex trajectory tracking method, the tip-vortex pairing process are clearly observed in transient flight($\mu$=0.03) and disappears at a slightly higher advance ratio($\mu$=0.05). According to the steady flight simulation at $\mu$=0.03, it is confirmed the tip-vortex pairing process is continued in the rear part of rotor disk and not occurs in the front part. Time averaged inflow in this case is predicted as smooth distribution.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.8
• /
• pp.56-64
• /
• 2005

It is prerequisite that we have to fomulate the nonlinear mathematical modeling to design the guidance and control system of rotorcraft-based unmanned aerial vehicle using a small-scaled commercial helicopter. The small-scaled helicopters are very different from the full-scale helicopters in dynamic behavior such as high rotation speed and high frequency dynamic characteristics. In this paper, the formulation of the mathematical model of the small-scaled helicopter to minimize the complexity is presented by component and source build-up approach. It is linearized at the trim condition of hovering and forward flight and analyzed the flight modes. The results of this approach have general trends but a little difference. To verify this approach, it is necessary to compare this theoretical model with experimental results by system identification using flight test as a next research topic.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.580-585
• /
• 2005

Natural environment of Weolgok-ri watershed has been well preserved as a traditional agricultural watershed. A year record of streamflow, $NO_3-N$, T-N and T-P concentrations data(Apr, 2004-Mar. 2005) was examined to estimate annual and seasonal patterns of pollutnat loads in streamflow and baseflow from the agriculture watershed. To estimate pollutant loads from baseflow, baseflow component from total stream flow was seperated using digital filter method in the Web-based Hydrograph Analysis Tool system. Loads of $NO_3-N$, T-N and T-P from streamflow and baseflow were evaluated to investigate pollutant loads contribution by baseflow. The $NO_3-N$, T-N, and T-P loads from streamflow were 13.85 kg/ha, 45.92 kg/ha and 1.887 kg/ha, respectively. $NO_3-N$, T-N and T-P loads from baseflow were 7.43 kg/ha, 24.70 kg/ha, 0.582 kg/ha, respectively. It was found that $NO_3-N$ and T-N loads were contributed by the baseflow(53% and 53% of Total-loads) than the direct runoff(47% and 47% of Total loads). However, only 30% of total T-P was contributed by the baseflow. It is recommended that one needs to assess pollutant load contribution by the baseflow to identify appropriate control strategies for effective watershed management.

• Food Quality and Culture
• /
• v.3 no.1
• /
• pp.1-5
• /
• 2009

The objective of this study was to develop a reliable and reproducible descriptive analysis procedure for Korean style sweet pumpkin gruel (Hobakjuk). The sensory attributes of the sweet pumpkin gruel were developed and defined, the sample preparation method was standardized, and the sensory evaluation procedure for a sample was established. Seven types of sweet pumpkin gruel (five ready-to-eat type vs. two ready-to-heat type) were selected to be analyzed. Panel training and descriptive analysis were carried out with these 7 samples. A total of 12 sensory attributes (2 aroma/odor, 5 taste/flavor, 4 texture/mouthfeel, and 1 aftertaste attributes) were developed to describe the sensory characteristics of the sweet pumpkin gruel. The definition and reference standards for each sensory attribute were determined to clearly understand each attribute. In the main experiment, trained panelists evaluated the sensory characteristics of the 7 gruel samples based on a fifteen-point intensity scale using the developed attributes. The results were statistically analyzed by analysis of variance, principal component analysis, and cluster analysis. The results showed that the 7 sweet pumpkin gruel samples significantly differed in their intensities of all attributes except for sweet pumpkin aroma and viscosity. The ready-to-eat style samples were distinctly characterized by their sweet pumpkin aroma and flavor, whereas the ready-to-heat style samples were markedly characterized by their low intensity of gelatinized starch and pumpkin flavor retention.

• Journal of the Korean Society of Food Culture
• /
• v.27 no.5
• /
• pp.512-520
• /
• 2012

This study investigated the sensory characteristics of adlay tea favorably consumed by Korean consumers and analyzed the drivers behind for liking or disliking adlay tea. Six adlay tea products showing the highest market share in South Korea were selected. Sensory properties of the six products were analyzed using generic descriptive analysis. Among these, four products were further selected for consumer taste acceptance test. Sensory lexicons of adlay tea were developed by trained panelists, and the sensory characteristics of each adlay tea product were measured based on the perceived intensities of these attributes elicited from the samples. In the consumer taste acceptance test, frequent tea and coffee drinkers participated. Consumers rated the acceptance of each tea product on a 9-point hedonic scale and evaluated the reasons for liking or disliking each product based on the check-all-that-apply method. Analysis of Variance, principal component analysis, frequency analysis, and correspondence analysis were utilized for statistical analysis. Twenty sensory attributes were developed in order to characterize the six adlay tea products. The results of the descriptive analysis showed that attributes such as viscosity, black soybean flavor, goso flavor, peanut flavor, seaweed flavor, green, and presence of chunks were key factors differentiating the adlay tea products. In the consumer taste test, roasted flavor, goso flavor, peanut flavor, and presence of chunks were positive drivers for liking the adlay tea products, whereas seaweed and green flavors were negative attributes that drove consumers away.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.3
• /
• pp.133-142
• /
• 2020

Purpose : The purpose of this study was to investigate the differences in social quotient and sensory processing function between completed-toileting and incomplete-toileting children with autism spectrum disorder (ASD). We aims to provide a basis for the training of children with autism spectrum disorders. Methods : The subjects of this research were children with ASD, aged from 4 to 7, receiving sensory integration therapy at the H-Child Development Research Center in Busan, South Korea. After recruiting 30 parents who had children with ASD, we interviewed them and we divided their children into completed-toileting group and incomplete-toileting group based on the past researches. We assessed them using the Social Maturity Scale and Sensory Profile. Spearman correlation was used to analyze between the sensory processing score and social quotient. Mann-Whitney U test was used to compare the Sensory Profile scores of the two groups. Results : The social quotient was correlated with the sensory processing score in the most of component as for auditory processing, vestibular processing, touch processing, multisensory processing, orosensory processing, except for visual processing. The groups of completed-toileting and incomplete-toileting group showed statistically significant intergroup difference in sensory seeking, emotional reactive, oral-sensory sensitivity, and inattention/distractibility in the sensory factor region. No statistically significant difference from intergroup was observed in any modulation areas, nor in behavioral & emotional response domains. Conclusion : A significant intergroup difference was observed in the most of sensory processing areas, except for modulation areas and behavioral & emotional response domains. The result revealed that toileting is significantly correlated with sensory processing. Therefore, this study suggests that the sensory processing function should be considered in the toilet training of children with ASD.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.299-309
• /
• 1998

The national coordinate system is an essential component for a geographic/land information system, since it provides the spatial reference for expressing position information. The national mapping of Korea has been based on 3-different meridians on the Gauss-Schreiber projection in year 1910s, later this was changed to the Gauss-Kruger projection. Existing map coordinate systems maintaining the national land survey project on 1910s, have some structural shortcomings of unknown computational procedures and projection methods. In this paper, the problems of the map coordinates usage and of longitudes origin shift(10.405") and their solutions are investigated. Also, this study discusses the issues involved in choosing coordinate system for digital mapping and their applications as a basis for spatial data management. The foreign country's coordinate systems are reviewed and the elements to realize a new unified grid coordinate system is proposed. The Transverse Mercator projection with a central meridian of $127^\circ\;30'$, scale factor 0.9996, and GRS80 ellipsoid, is selected in Korean peninsula.sula.

• Journal of The Korean Astronomical Society
• /
• v.34 no.4
• /
• pp.309-311
• /
• 2001

Strong thermal X-ray emission, called Galactic Ridge X-ray Emission, is observed along the Galactic plane (Koyama et al. 1986). The origin of hot ($\~$7 keV) component of GRXE is not known, while cool ($\~$0.8 keV) one is associated with supernovae (Kaneda et al. 1997, Sugizaki et al. 2001). We propose a possible mechanism to explain the origin; locally strong magnetic fields of $B_{local}\;\~30{\mu}G$ heat interstellar gas to $\~$7 keV via magnetic reconnection (Tanuma et al. 1999). There will be the small-scale (< 10 pc) strong magnetic fields, which can be observed as $(B)_{obs} \;\~3{\mu}G$ by integration of Faraday Rotation Measure, if it is localized by a volume filling factor of f $\~$ 0.1. In order to examine this model, we solved three-dimensional (3D) resistive magnetohydrodynamic (MHD) equations numerically to examine the magnetic reconnect ion triggered by a supernova shock (fig.l). We assume that the magnetic field is Bx = 30tanh(y/20pc) $\mu$G, By = Bz = 0, and the temperature is uniform, at the initial condition. We put a supernova explosion outside the current sheet. The supernova-shock, as a result, triggers the magnetic reconnect ion, and the gas is heatd to > 7 keV. The magnetic reconnect ion heats the interstellar gas to $\~$7 keV in the Galactic plane, if it occurs in the locally strong magnetic fields of $B_{local}\;\~30{\mu}G$. The heated plasma is confined by the magnetic field for $\~10^{5.5} yr$. The required interval of the magnetic reconnect ions (triggered by anything) is $\~$1 - 10 yr. The magnetic reconnect ion will explain the origin of X-rays from the Galactic ridge, furthermore the Galactic halo, and clusters of galaxies.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.115.1-115.1
• /
• 2011

We analyzed the line profiles of the planetary nebula (PN) NGC 7009 secured with the Keck I HIES and BOES's spectral data. The 5 positions were taken over the nebular image, 4 points on the bright rim plus 1 point at the central position. The covered spectral wavelength range was $3250{\AA}-8725{\AA}$ in these observations. We decomposed the lines of HI, HeI, HeII, CII, NIII, [ClIII], [NII], [OII], [OIII], [SII], [SIII], [ClIII], and [ArIII] using the IRAF and StarLink/Dipso. After correcting the Earth's movement and the PN's radial velocities, -48.6 & -48.9 km/s, respectively, for the Keck & BOES, we produced the line profiles in a velocity scale. The zero velocity at each line profile clearly indicates which part of the components is approaching or receding, giving a general information of the kinematical structure. Almost all of the low-to-medium excitation lines, such as [NII], [SII], [O III], and [ArIII], secured at the central position and four positions along the major & minor axes, showed 3 components, double peak + a wide wing component, suggesting the fast outflow structures are present. The overall geometry is a prolate shell which also has a fainter outer shell in the halo zone, but there appears to be some peculiar sub-structures inside the main shell. The high excitation He I, HeII, NIII lines which might be formed close to the inner boundary of the shell show unusual features, completely different from the other lines. The HeII and these high excitation lines may be indicative of a relative recent fast outflow from the central star and the permitted lines such as NIII might be affected by the innermost structure. We discuss a possible presence of a jet-like fast outflow structure in an out-flow axis different from the main axis of the spheroid shell.