• Nuclear Engineering and Technology
• /
• v.44 no.6
• /
• pp.673-682
• /
• 2012

Three dimensional atom probe tomography (3D APT) is applied to characterize the dissimilar metal joint which was welded between the Ni-based alloy, Alloy 690 and the low alloy steel, A533 Gr. B, with Alloy 152 filler metal. While there is some difficulty in preparing the specimen for the analysis, the 3D APT has a truly quantitative analytical capability to characterize nanometer scale particles in metallic materials, thus its application to the microstructural analysis in multi-component metallic materials provides critical information on the mechanism of nanoscale microstructural evolution. In this study, the procedure for 3D APT specimen preparation was established, and those for dissimilar metal weld interface were prepared near the fusion boundary by a focused ion beam. The result of the analysis in this study showed the precipitation of chromium carbides near the fusion boundary between A533 Gr. B and Alloy 152.

• Nuclear Engineering and Technology
• /
• v.41 no.7
• /
• pp.979-988
• /
• 2009

Tensioned metastable fluids provide a powerful means for low-cost, efficient detection of a wide range of nuclear particles with spectroscopic capabilities. Past work in this field has relied on one-component liquids. Pure liquids may provide very good detection capability in some aspects, such as low thresholds or large radiation interaction cross sections, but it is rare to find a liquid that is a perfect candidate on both counts. It was hypothesized that liquid mixtures could offer optimal benefits and present more options for advancement. However, not much is known about radiation-induced thermal-hydraulics involving destabilization of mixtures of tensioned metastable fluids. This paper presents results of experiments that assess key thermophysical properties of liquid mixtures governing fast neutron radiation-induced cavitation in liquid mixtures. Experiments were conducted by placing liquid mixtures of various proportions in tension metastable states using Purdue's centrifugally-tensioned metastable fluid detector (CTMFD) apparatus. Liquids chosen for this study covered a good representation of both thermal and fast neutron interaction cross sections, a range of cavitation onset thresholds and a range of thermophysical properties. Experiments were devised to measure the effective liquid mixture viscosity and surface tension. Neutron-induced tension metastability thresholds were found to vary non-linearly with mixture concentration; these thresholds varied linearly with surface tension and inversely with mixture vapor pressure (on a semi-log scale), and no visible trend with mixture viscosity nor with latent heat of vaporization.

• International Journal of High-Rise Buildings
• /
• v.2 no.3
• /
• pp.245-255
• /
• 2013

This paper presents the results of a set of wind tunnel tests carried out to examine wind-induced overall structural loads on rectangular medium-rise buildings. Emphasis was directed towards torsion and its correlation with peak shear forces in transverse and longitudinal directions. Two building models with the same horizontal dimensions but different gabled-roof angles ($0^{\circ}C$ and $45^{\circ}C$) were tested at different full-scale equivalent eave heights (20, 30, 40, 50, and 60 m) in open terrain exposure for all wind directions (every $15^{\circ}C$). Wind-induced pressures were integrated over building surfaces and results were obtained for along-wind force, across-wind force, and torsional moment. Maximum wind force component was given along with the other simultaneously-observed wind force components normalized by the overall peak. The study found that for flat-roofed buildings maximum torsion for winds in transverse direction is associated with 80% of the overall shear force perpendicular to the longer horizontal building dimension; and 45% of the maximum shear occurs perpendicular to the smaller horizontal building dimension. Comparison of the wind tunnel results with current torsion provisions in the American wind standard, the Canadian and European wind codes demonstrate significant discrepancies. Suggested load combination factors were introduced aiming at an adequate evaluation of wind load effects on rectangular medium-rise buildings.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.2
• /
• pp.31-36
• /
• 2003

This paper proposes an acceleration method of PCA(Principal Component Analysis) based feature detection. The feature detection method makes decision whether the target feature is included in a given image, and if included, calculates the position and extent of the target feature. The position and scale of the target feature or face is not known previously, all the possible locations should be tested for various scales to detect the target. This is a search Problem in huge search space. This Paper proposes a fast face and feature detection method by reducing the search space using the multi-stage prediction map and contour Prediction map. A Proposed method compared to the existing whole search way, and it was able to reduce a computational complexity below 10％ by experiment.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.5
• /
• pp.635-642
• /
• 2011

Hydraulic efficiency was a vital component in evaluating the disinfection capability of clearwell. Current practice evaluates these system based on the tracer test only. In this paper, CFD(Computational Fluid Dynamics) was applied on the clearwell for alternating or supplementing the tracer test. The baffle factor derived from the CFD modeling closely matched the values obtained from full scale tracer testing. And, for suggesting proper numerical model in clearwell; the turbulence model, discretization scheme, convergence criteria were investigated through separate simulation runs. The model validation was conducted by comparing the simulated data with experimental data. In the turbulence model, the realizable ${\kappa}-{\varepsilon}$ model and the standard ${\kappa}-{\varepsilon}$ model were found to be more appropriate than RNG ${\kappa}-{\varepsilon}$ model. The residuals of convergence criteria should be used as not $10^{-3}$ but $10^{-4}$ or $10^{-5}$. In discretization scheme, the difference of simulated values in 1st, 2nd, 3rd upwind scheme was found to be insignificant. Moreover, the result of this study suggest that CFD modeling can be a reliable alternative to tracer testing for evaluating the hydraulic efficiency.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.3
• /
• pp.255-264
• /
• 2015

Wind load and flow field of a drillship with respect to various super structures were experimentally investigated in KARI 1m-wide wind tunnel with an atmospheric boundary layer simulation. Six-component external balance and Particle image velocimetry technique were used to measure wind load and velocity vectors in the flow-field around the model respectively. The experimental model was an imaginary shaped drillship with an approximated model which has 1/640 scale compared with recent typical drillships. The test Reynolds number based on the overall length was about 1.5×10⁶. It was found that dominant factors influencing on ship wind load are cabin shape and cabin height. Round cabin has smaller axial wind load and narrow boundary layer around the ship than rectangular one, but its yawing moment at certain angles becomes higher. Low cabin height also show positive effects on axial wind load too. Hull shape and forecastle shape show relatively small influences on wind loads except for slight changes around ±45° wind directions.

• Korean journal of food and cookery science
• /
• v.32 no.4
• /
• pp.413-425
• /
• 2016

Purpose: This study was conducted to understand the factors that affect the acceptance of gluten-free rice pasta samples prepared with added buckwheat, mungbean, and acorn starches, and to compare sensory characteristics of samples with those of 100% semolina pasta. Methods: Descriptive analysis of pasta was conducted by 12 trained panels. Acceptance test was carried out by 40 consumers using 7-point hedonic scale. Collected data was statistically analyzed by principal component analysis, and partial least squares regression analysis. Results: Quantitative descriptive analysis showed that increasing amount of buckwheat, mungbean, and acorn starches resulted in significant improvement in gluten-free rice pasta properties, especially texture, hardness, chewiness, roughness, and al dente with increasing amount of sample starches, and decreased adhesiveness. In acceptance test, appearance and texture of gluten-free rice pasta with mungbean starch were preferred than pasta made with 100% rice. Flavor and taste was preferred in pasta with buckwheat starch than other pasta samples. Rice pasta with 30% buckwheat starch showed the highest score in overall acceptance among rice samples. Conclusion: This study suggested that adding mungbean starch could improve texture of gluten-free pasta, and adding buckwheat starch would improve taste and flavor of gluten-free rice pasta.

• Food Science of Animal Resources
• /
• v.36 no.2
• /
• pp.137-144
• /
• 2016

Livestock is considered as one of the most important segments in agriculture since animal husbandry was practiced for centuries as a backyard system by rural families. Livestock plays as a powerful tool in rural development where meat industry contributes a dominant part. Meat and meat products become a vital component in the diet, which had been one of the main protein sources traditionally as well. The development in the livestock and meat industry of Sri Lanka basically depends upon religious, cultural, and economic factors. There is a growing demand for processed meat products in Sri Lankan urban culture and several large scale processors entered the business during the past few decades. The consumption of meat and meat products shows an upward trend in Sri Lanka during the last decade and is anticipated to increase further in future. The growth potential of the local meat industry is considerably high owing to the improvement of the market and consumer perception. The present status, trends, and future prospects for the Sri Lankan meat industry with respect to production, consumption, processing, marketing, and improvement are discussed in this review.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.131-134
• /
• 2004

A lot of foreign objects(ceramics, pottery, bronze, glassware and coins, etc.) have been found in the archaeological sites in Korea. These foreign objects are the evidences of the cultural exchanges of that time, whose scale and routes are an important part of the studies in ancient history. So it is crucial to accumulate basic reference information such as the raw materials and the production method of these objects through scientific researches, along with archeological researches. These scientific research materials provide a basis for finding the importing route and the origin of these objects. Besides, we can find out extraordinary and distinctive production technique by comparison with tile domestic objects. This article reports the result of an analysis, performing on 36 samples of the glassware fragments excavated from the South Tomb of the Hwangnamdaechong, to verify their components and note peculiar features. We have analyzed the major and minor components of 10 elements, and then by using these data examined the differences in the composition of components, varying with the origin and color of glassware. We used the PCA(principal component analysis) as the statistical method to classify the sample in order to find out how the samples formed groups.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.4
• /
• pp.11-19
• /
• 2011

PADDIMOD2 was deloped to estimate nonpoint source pollution from paddy rice fields. The PADDIMOD2 was enhanced to estimate runoff and pollutant load during non-growing as well as growing season and to be easily used for public by development of Excel based system. Nutrient concentration and hydrology were based on Dirac delta function and continuous source function, and tank model for growing season and Event Mean Concentrations (EMCs) and SCS-Curve Number method for non-growing season. The PADDIMOD2 consists of three main component (input data, parameters data, and output data) by including eight Excel spread sheets. As a result of model application, total precipitation and irrigation were 1,051.7 mm and 439.2 mm, respectivley and surface runoff and water loss including infiltration and evapotranspiration were 463.0 mm and 947.9 mm, respectively. Annual nutrient loadings of T-N and T-P from study area were 6.7 kg/$km^2$/day and 0.5 kg/$km^2$/day, respectively. Development of PADDIMOD2 was focused on minimizing input data and maximizing user friendly system and is expected to be useful tool to evaluate various non-structure BMPs and estimate unit load from paddy rice fields for application at Korean TMDL.