• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.937-950
• /
• 2004

With growing population of internet and web applications, distributed environment is considered to be the standard architecture of application. A network management systems(NMS) is necessary to control and monitor the complex network resources for providing and sharing the heft quality service. We recognize the NMS as a standard infrastructure for supporting efficient networking and a separate commercial applications. We believe every resource including software, hardware and environment for the network management should be separated from special protocols, vendors and applications. Therefore, We need a standard network management system that is efficient and consistent because of the heterogeous network features. In regards to software development, software reuse through assembling and extending the reusable elements such as patterns and components assures to realize the best productivity and quality The component based development(CBD) methodology that can assemble black box though well defined interfaces makes it possible to develop easer and quicker applications and is proved as the best software development solution involved in construction, selection and assembly of components. In this thesis, we describe the architecture for the network management and identify, define and design the components through analysis and design in the network management domain and Identified components mapped to the component architecture. We also specify the component development and design and implement the component for developing the network management. Implemented components apply to the component repository system that register, retrieve and understand the components. We analyze, design and implement the entire network management system based on configuration, connection, performance and fault management through the pre-developed components.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.38-47
• /
• 2010

The purpose of this study is to examine the characteristics by design component elements of the facade in elementary school buildings after the 7th educational curriculum. This study choose twenty five elementary school as the subjects of the study. And among many elevations of building, an elevation that is alongside of the schoolyard is chosen because this elevation has the highest visual influence on passers-by. To begin with, this elevation is divided into the roof and the surface of a wall, The roof is divided into roof styles, existence of roof and materials. The surface of a wall is divided into design principles(balance, contrast, rhythm), the formal organization(basic elements and form, and transformation of form), the ornamental composition, materials and colors. The results of the research are summarized as follows: First of all, motifs of classical architecture were well expressed in this period and postmodern tendency had been shown until 2005. After Build Transfer Lease(BTL), however, tendency of classical architecture, contrast by the size of the form and base element by point disappeared. Instead, asymmetrical and flat tendency is expressed. Also, emphasized design of the building elevation appear by basic colors of Munsell, not motifs of classical architecture.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.1
• /
• pp.53-59
• /
• 1997

Current CAD systems used in the AEC community have some critical problems. One of them is that they hardly support design collaboration. Thus designers and engineers are hard to transfer design knowledge from one discipline to another. What we need is a common building database which creates and manages building plans/models and relevant design knowledge consistently and effectively. This paper presents a powerful CAD editor, called UNIFORM, which is being developed. Currently UNIFORM includes three main modules: a plan generator, a 3-D model generator, and component databases. A plan generator, called UNIFORM PLANNER, creates a plan which contains semantically-rich information of building. Each component in the plan can be presented in various ways and connected to component databases that contain knowledge of building components such as windows, doors, walls, etc. Based on the plan UNIFORM MODELER, another module of the program, generates a three dimensional building model which could be a multiple-story building. One of the main ideas behind the system is that it generates and maintains a common building form that can be easily delivered to other members of the project team. Thus it is expected to increase system integration, team interactions, and productivity.

• Science of Emotion and Sensibility
• /
• v.14 no.3
• /
• pp.445-458
• /
• 2011

This study aims to propose management items and implementation plans that can be used to manage the following topics: what components should be managed to ensure effective implementation of design leadership, which is critical to today's business management? And are all parts of a company established in accordance with the brand concept, thereby ensuring brand-oriented design leadership? Firstly, this study divided the components of design leadership management into, in a broad sense, vision, culture and platform, established sub-components that should be considered in managing each higher component, and suggested implementation plans for each component. Secondly, the implementation plans for each component were classified into workforce structures, development of brand penetration programs, distribution of time and material resources and application of identity programs. Also, each classified item was further categorized and detail implementation plans for each item were suggested. The outcomes of this study can be utilized as guidelines to evaluate whether each component is properly managed in implementing design leadership. It is also expected that these will serve as useful guides for designers, managers and consultants.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.6
• /
• pp.771-780
• /
• 2010

This paper describes the design process of a six-component force/torque (F/T) sensor. The new six-component F/T sensor having leaf spring ends has been developed using a cross beam structure as the basic sensing element. Fundamental strain analysis of both ends fixed beam having a leaf spring structure is performed by finite element analysis. In order to obtain similar output sensing strains from the six component loads and minimize coupling strains, the optimal location of strain gages is determined and the strain gages are connected so that the bridge circuits with four strain gages would be balanced. Using leaf spring ends instead of rigid fixed ends, remarkable increment in output sensing strain can be achieved for two component forces. Several modifications in design result in a similar sensing strain of approximately $400\;{\mu}m/m$ for the six-component forces and moments, and a reduced coupling strain of $0\;{\mu}m/m$ between the forces and moments.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2003.06a
• /
• pp.107-113
• /
• 2003

Lately CBD methodologies like as CBD96, Catalysis, fusion, and SCIPIO have been introduced. These methodoloties has their own proprietary component reference model. Using proprietary reference model falls interoperability among methodologies. Furthermore it can cause confusion and difficulty for component developers. In this paper, we propose a integrated component meta-model for support consistency and interoperability among component designs. Also, we compare our proposed meta model to existing component reference model by using component's characteristics. We expect that it is easy to add new meta model elements and extends meta-model by using integrated component meta-model.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.2
• /
• pp.104-115
• /
• 1994

This paper presents the design of a placement sysyem integrated in PCB design system. to get an optimal component positioning from part and net list. Unplaced components are placed in initial process using modified cluster development algorithm and are swapped in improvement process using the GFDR(Generalized Force Directed Relaxation) algorithm. The result is optimized in post process by component rotating or pin/gate swapping. Experimental results shwo that the placement system produces manufacturable layouts which are optimal in terms of total routing length.

• The Journal of Korean Association of Computer Education
• /
• v.10 no.4
• /
• pp.51-59
• /
• 2007

There is the meager level of applying computers to mathematics education. It is because the effective mathematics educational softwares and the various contents that make students' spontaneous participation through the interaction with computers are insufficient. As a solution to solve it, we design and implement the graphic component, graphic entities and function types that are supported in the component was identified through analyzing the mid/high school curriculum, using a simple script language to invoke the functionality of the component improves reusability and extendability. The component can be used to produce the mathematics educational softwares and contents easily that need the facility to draw various functions and geometric figures.

• The KIPS Transactions:PartD
• /
• v.8D no.6
• /
• pp.781-788
• /
• 2001

As changing financial environment and increasing the number of access channel to banking system, new banking system is needed which can be developed financial commodity rapidly, can be deployed easily, and can be maintained easily. Component based development method is believed to meet these demands. In this paper, we propose EJB banking component and explain its system architecture and functionality. And we design and implement approval system on EJB banking component system. To implement approval system, approval conditions are classified and registered. Using registered approval condition, transactions are classified whether approval is needed or not. Approval client for web based client standardization has an advantage of no need to deploy and manage software version.

• The Journal of Korea Robotics Society
• /
• v.10 no.1
• /
• pp.24-32
• /
• 2015

This paper introduces a graphical user interface design that is aimed to apply to the surveillance and security robot, which is the pilot program for the army unmanned light combat vehicle. It is essential to consider the activities of robot users under the changing security environment in order to design the efficient graphical user interface between user and robot to accomplish the designated mission. The proposed design approach firstly identifies the user activities to accomplish the mission in the standardized scenarios of military surveillance and security operation and then develops the hierarchy of the interface elements that are required to execute the tasks in the surveillance and security scenarios. The developed graphical user interface includes input control component, navigation component, information display component, and accordion and verified by the potential users from the various skilled levels with the military background. The assessment said that the newly developed user interface includes all the critical elements to execute the mission and is simpler and more intuitive compared to the legacy interface design that was more focused on the technical and functional information and informative to the system developing engineers rather than field users.