• Journal of Power Electronics
• /
• v.2 no.3
• /
• pp.181-188
• /
• 2002

The utility interfaced sinewave modulation Inverter for the solar photovoltaic power conditioner with a high frequency transformer is presented for residential applications. As compared with the conventional full-bridge hard switching slnewave PWM inverter with a high frequency link, the simplest single-ended edge-resonant soft switching sinewave inverter with a sinewave duty cycle pulse control scheme is implemented, resulting in size and weight reduction, low cost and high efficiency This paper presents a prototype system of the sinewave zero voltage soft switching sinewave inverter for solar power conditioner, along with its operating principle and unique features. In addition to these, this paper discusses a control implementation to deliver high quality output current. Major design of each component and the power loss analysis under actual power processing is also discussed and evaluated from an experimental point of view A newly developed utility-connected sinewave power conditioning circuit which achieves 92.5% efficiency under 4kW output is demonstrated.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.166-171
• /
• 2002

The objective of this paper is to investigate the effect of clearance and the configuration of die system on burr formation by FEM analysis and experimental tests. Compared with casting, forging and machining, shearing has been known, especially in heavy or mass-production industries, as a very economical and fast way to obtain the desired shape Recently, the shearing process becomes widely used in the small and light electronic component manufacturing industries. When shearing a part of sheet metal, the burr formed on the cutting edge is usually unavoidable. The burr would not only degrade the precision of products but also causes additional cost for the deburring process. In this paper, the influence of shearing parameters such as clearance and configurations of the lower pad (ejector) on burr formation is investigated by using the experimental and numerical approach. From the experimental results, it has been shown that the more narrow clearance gives the smaller burr height and the higher shearing forces. The removal of lower holder also makes the sheared surface integrity and the dimensional accuracy become worse. The FEM results (using DEFORM-2D) show good agreement with the experimental results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.75-78
• /
• 2014

MLCC is one of the most frequently used component in high-tech device like smart phone. Because of dynamic characteristic of piezoelectric materials which is main ingredient of MLCC, its vibration leads to acoustic noise from pcb. To solve this problem at minimal cost, company has to change only the main noise-generating MLCC to low noise-generating MLCC. To find the main noise source, this study approached to solution from a vibration point of view. From mode shapes of pcb at particular frequencies, two groups can be obtained; MLCCs soldered at where maximum deformation occurs and where anti-phase with respect to the other group appears. When the MLCC belongs to 1st group does not working, amplitude at where maximum deformation occurs decreases compared to when all MLCCs are working. This tendency also appears in noise measurement. This analysis can be put to use in various fields where require noise reduction or noise source identification.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5556-5573
• /
• 2017

As a main component of Internet of Things (IoTs), the wireless sensor networks (WSNs) have been widely applied to various areas, including environment monitoring, health monitoring of human body, farming, commercial manufacture, reconnaissance mission in military, and calamity alert etc. Meanwhile, the privacy concerns also arise when the users are required to get the real-time data from the sensor nodes directly. To solve this problem, several user authentication and key agreement schemes with a smart card and a password have been proposed in the past years. However, these schemes are vulnerable to some attacks such as offline password guessing attack, user impersonation attack by using attacker's own smart card, sensor node impersonation attack and gateway node bypassing attack. In this paper, we propose an improved scheme which can resist a wide variety of attacks in WSNs. Cryptanalysis and performance analysis show that our scheme can solve the weaknesses of previously proposed schemes and enhance security requirements while maintaining low computational cost.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.64
• /
• pp.187-210
• /
• 2014

As port functions change to act as an economic catalyst and take on a central position in industries engaged in international trade, port hinterland has become a significant component in international shipping. The success of port hinterland as a strategic base of logistic activities critically depends on location selection factor for international distribution center that links elements of global supply chain management. By examining multi-measurement items empirically, this paper analyzed location selection factor for international logistics distribution center in port hinterland, and evaluated Busan new port hinterland from the user's perspective. Employing exploratory factor analysis, the results revealed that the model structured around five factors incorporating geo-location and accessibility, availability, political supports, cost factors, and quality of business environment is valid and reliable in the context of the location selection factors for logistics distribution center in the context of port hinterland operations. The evaluation of Busan new port hinterland provides useful insights for strategic improvement to accommodate the users' expectation. Further, the model offers both a descriptive and diagnostic strategic management tool for port hinterland development and operations, to guide future improvement.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.691-699
• /
• 2008

In the design of a foundation, settlement of the foundation may exceed allowable design criteria even with a competent bearing stratum. In such a case, a piled-raft foundation system may be adopted using piles as settlement reducing component. In this paper, Disconnected Piled Raft Foundation (DPRF) system, which installs disconnected piles underneath the raft and uses the piles as ground reinforcements, is studied as a cost effective design method against the classical piled-raft foundation system. To this end, large size loading tests were carried out on weathered ground changing area replacement ratio and length of piles. The results indicated that the settlement of the reinforced ground was reduced by 34~87% and the allowable bearing pressure increased by 70% on average from those of the unreinforced original ground, respectively. The correlating formula between the area replacement ratio and the load bearing ratio of piles were derived from the test results and numerical analysis. From the correlation, a design method determining the size and the quantity of the disconnected piles to enhance the bearing capacity of original ground to the desired value was proposed based on one inch settlement criteria.

• Journal of Power Electronics
• /
• v.3 no.3
• /
• pp.145-150
• /
• 2003

Reliability, availability, and cost have been the major concerns for photovoltaic hybrid systems since their beginning as primary sources for much critical applications like communication units and repeaters. This paper descnbes the performance of two hybrid systems, photovoltaic-battery, wind-turbine coupled with the public-grid (PVBWG) hybrid system and photovoltaic-battery, wind-turbine coupled With the diesel generator (PVBWD) hybrid system The systems are sized to power a typical 300W/48V de telecommunication load continuously throughout the year Such hybrid systems consist of subsystems, which in turn consist of components Failure of anyone of these components may cause failure of the entire system. The reliability and availability basics, and estimation procedure for the two proposals are introduced also in this paper. The PVBWG and PVBWD system configurations are shown with the relevant mean-time-between-faIlure (MTBF) and failure rate (${\lambda}$) of each component. The characteristics equations of the two systems are deduced as a function of operating hours and the percentage of sun and wind availabilities per day. The system probability failure as well as the reliability is estimated based on the fault tree analysis technique. The results show that, by using standard or normal components MTBF, the PVBWG is more reliable and the time of periodic maintenance period is more than one year especially in the rich sites of both sun and wind, but PVBWD competes else Also, in the first five years from the system installation, the system is quit reliable and may not require any maintenance. The results show also, as the sun and wind are available, as the system reliable and available.

• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.773-778
• /
• 2018

In-situ transesterification of microalgae lipids using microwave irradiation has potential to simplify and accelerate biodiesel production, as it minimizes production cost and reaction time by direct transesterification of microalgae into biodiesel with microwave as a heating source. This study was conducted to research the effect of microwave irradiation with in-situ transesterification of microalgae under base catalyst condition. The process variables (reaction time, solvent ratio, microwave power) were studied using 2% of catalyst concentration. The maximum yield of FAME was obtained at about 32.18% at the reaction time of 30 min with biomass-methanol ratio 1:12 (w/v) and microwave power of 450 W. The GC MS analysis obtained that the main component of FAME from microalgal oils (or lipids) was palmitic acid, stearic acid and oleic acid. The results show that microwaves can be used as a heating source to synthesize biodiesel from microalgae in terms of major components resulting.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1453-1458
• /
• 2009

Sensor network for the human approach in a difficult area and a wide range of surveillance and the boundaries for the purpose and mission is the utilization significantly. In this paper we searched important nodes from the surveillance reconnaissance sensor network based on the virtual data. we generated data within the sensor's measurement range in the data transmitted from sensor nodes, and used PCA(Principle Component Analysis) for searching key node. If the important sensor node searched, and we can have easy management and establishing security measures when security problems is happened about nodes. This is for the sensor network in terms of effectiveness and cost-effectively and is directly connected with life span.

• International Journal of High-Rise Buildings
• /
• v.7 no.4
• /
• pp.343-362
• /
• 2018

A simplified spring connection modelling approach for steel flush endplate beam-to-column connections in fire has been developed to enable realistic behaviour of connections to be incorporated into full-scale frame analyses at elevated temperature. Due to its simplicity and reliability, the proposed approach permits full-scale high-temperature frame analysis to be conducted without high computational cost. The proposed simplified spring connection modelling approach has been used to investigate the influence of connection ductility (both axial and rotational) on frame behaviour in fire. 2D steel and 3D composite frames with a range of beam spans were modelled to aid the understanding of the differences in frame response in fire where the beam-to-column connections have different axial and rotational ductility assumptions. The modelling results highlight that adopting the conventional rigid or pinned connection assumptions does not permit the axial forces acting on the connections to be accurately predicted, since the axial ductility of the connection is completely neglected when the rotational ductility is either fully restrained or free. By accounting for realistic axial and rotational ductilities of beam-to-column connections, the frame response in fire can be predicted more accurately, which is advantageous in performance-based structural fire engineering design.