• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.54-61
• /
• 2000

A method and results of classification of 4 types metallic wear debris were presented by using their color features. The color image of wear debris was used (or the initial data, and the color properties of the debris were specified by HSI color model. Particle was characterized by a set of statistical features derived from the distribution of HSI color model components. The initial feature set was optimized by a principal component analysis, and multidimensional scaling procedure was used for the definition of classification plane. It was found that five features, which include mean values of H and S, median S, skewness of distribution of S and I, allow to distinguish copper based alloys, red and dark iron oxides and steel particles. In this work, a method of probabilistic decision-making of class label assignment was proposed, which was based on the analysis of debris-coordinates distribution in the classification plane. The obtained results demonstrated a good availability for the automated wear particle analysis.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.196-198
• /
• 1998

순수자바기술을 이용한 응용서비스가 정보통신망의 발달과 함께 빠른 속도로 증대되고 있다. 이러한 자바응용 서비스는 네트워크 분할(partition) 및 서버의 실패(crash)와 같은 전산망의 결함에도 불구하고 안정적이고 지속적인 서비스를 제공하는 것이 바람직하다. 이러한 요구사항은 서비스를 제공하는 분산된 서버들을 논리적인 하나의 그룹으로 동작하도록 하는 프로세서 그룹을 이용함으로써 해결될 수 있다. 본 연구에서는 네트웍 분할로 인해 프로세서 그룹이 두 개이상의 구성요소(component)로 나뉘어 지더라도 지속적인 고가용성(high availability)의 지원을 위해 응용서비스의 특성에 따라 기존의 처리결과에 영향을 받아 다음 서비스를 처리해야 한다. history-sensitive 그룹과 기존의 처리결과에 영향을 받지 않는 history-sensitive 그룹의 개념을 도입하여 기존의 프로세서 그룹을 확장한 신뢰성 있는 프로세서를 그룹 서비스에 대해서 살펴본다.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1414-1419
• /
• 2011

In this paper we study the modeling to quantitatively assess the failure rate of USN system designed for fault-tolerant architecture, aiming at applying the world's best domestic USN technology to safety-critical railways. In order to apply the USN system to the safety-critical field like a train control sector that the failures of controllers may cause severe railway accidents such as train collision and derailment, the quantitative reliability and safety evaluation recommended in IEC 62278 must be preceded. We also develop the evaluation model for overall system failure rate for the distributed network structure, which is the characteristics of USN system. Especially, we allocate reliability targets to component units, and present an availability evaluation plan through the plan on the quantitative achievement of failure rate for sensor nodes, gateways, radio-communication network and servers, along with the failure rate model of the overall system considering network operational features.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.7-13
• /
• 2011

RAMS is the procedure to maximize the reliability and availability of systems with managing operation rate, the frequency of failure in the system and repair method. Recently, all system life-cycle focusing on RAMS process has been rapidly developing in the field of railway vehicles, for example, applying th reliability management techniques for procurement and disposal of EMU. In particular, global economic recession require to reasonable measures for the EMU maintenance costs under the circumstances therefore, an alternative solution based on RCM(Reliability Centered Maintenance) which is the optimal maintenance method is interested. In this study, the state of being critical of each component and a primary factors was analyzed to improve VVVF inverter of the line 7 EMU by applying FMECA process. Furthermore, this paper showed the impact of connecting between the main and sub system. Based on these data, critical components according to malfunction ratings were classified by screening measures and improvements for each components was summarized.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.10
• /
• pp.1139-1143
• /
• 2009

Pneumatic cylinder is widely used as key component of various industry fields just like automation production line. Recently, people begin to pay attention to reduce development period and cost of pneumatic cylinder so research requirements of accelerated life test of pneumatic cylinder have been increased more than ever. In this research, we shall evaluate availability of acceleration model by statistical analysis of acceleration model's predicted value and life data which acquired in a real operation condition after finish accelerated life test of pneumatic cylinder. Also to predict the life of pneumatic cylinder in the operation condition we shall develop new acceleration model equations.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1403-1407
• /
• 2007

The bogie of Rolling Stock is the basic rolling component. It operates the train body, guides the body considering various tracks and offers comfort to passengers. We can verify the safety level of bogie about all factors through the first -grade scenario of Preliminary Hazard Analysis, but especially the horizontal acceleration sensor, equipped in each power bogie and trailer bogie, is the device, which makes it possible to test bogie instability and uncomfortable body movements by the method, similar to actual train driving, and in this context the necessity of this device becomes important. This paper would classify the main functions of driving sub system and examine the reliability, availability, maintainability and safety, which are main factors of RAMS. Especially, we would realize the bogie instability sensor with a simulator and offer the content in analyzing the data by the statistical method, which are obtained through the connected test with OBCS.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.827-832
• /
• 2009

Exergy is the amount of reversible work obtainable when some matter is brought to a state of thermodynamic equilibrium with ambient. This exergy is availability or useful work induced from carnot cycle, and this can calculate the irreversible loss work which occurs within any thermal or power cycle. The exergy ratio is the value of exergy divided by enthalpy of ambient reference, where the quality of energy or enthalpy in substances is evaluated by exergy ratio. Exergy is very important in optimal design method of thermal system or each component, and the value of exergy at given state is calculated by equation. Here, designer can easily understand and find the value of enthalpy because enthalpy is graphically drawn in chart, however exergy did not. In this paper, exergy and exergy ratio of air were drawn on temperature-entropy chart, and we wish to this chart is a help to design, analysis and education.

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.4
• /
• pp.71-83
• /
• 1989

The optimization in the machining process has been a long-standing goal of the manufacturing community. The optimization is composed of two main subjects;one is to select an optimum cutting condition, and the other is to detect the emergency situation and take necessary actions in real-time base. This paper proposes a reliable and practical guide system whose purpose is the optimization of cutting conditions, and the detection of tool failure in the machining process. The optimal cutting conditions are determined through the estimation of tool wear rate and the establishment of access- ible field from the measured cutting temperature and force. Tool breakage is detected by the normal force component acting on minor flank face extracted from on-line sensed feed force and radial force. In experiments, the proposed guide system has proved availability for the decision of reliable cutting conditions for the given tool-work system and the detection of tool breakage in ordinary cutting environments.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.710-715
• /
• 2001

Rubber is used extensively in many industries because of its large reversible elastic deformation, excellent damping and energy absorption characteristics, and wide availability. It becomes very important to predict the fatigue life of rubber components. But a great deal of time and cost are necessary for the fatigue test of rubber components. In this study the fatigue life of rubber components is evaluated by performing the fatigue test of a specimen and FE analysis. The fatigue life of Jang-gu type specimen which is considered as a simple rubber component is predicted and compared with experimental results. Its material is natural rubber of which hardness is 60 and used for the engine mount of commercial vehicles.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.85-94
• /
• 1999

Reconfiguration, expansion, or new establishment of FMS requires the availability of a shop floor control (SFC) system relevant to the FMS since it is closely related with the hardware component of FMS. Due to the expensive cost of its development, significant research efforts have been made to develop an SFC system that is reusable. This paper presents Abstract Machine Tool (AMT) approach applied to develop an SFC sytem that is reusable without additional programming. The AMT model enables us to design the SFC system independently of the hardware-dependent attributes of euqipment; an AMT models a workstation by abstraction and presents an equipment-independent interface to machining cell controller. Specifically, we describe how we formalize the interfaces among equipment in order to build an AMT and how we design the machining cell control software based on AMT models. We also present MACHINIST the machining cell control system for IAE-FMS plant as an implementation example.