• Atmosphere
• /
• v.26 no.3
• /
• pp.461-471
• /
• 2016

A quality check algorithm for the Weather Information Service Engine pulsed Doppler wind lidar is developed from a view point of spatial and temporal consistencies of observed wind speed. Threshold values for quality check are determined by statistical analysis on the standard deviation of 3-component of wind speed obtained by a wind lidar, and the vertical gradient of horizontal wind speed obtained by a radiosonde system. The algorithm includes carrier-to-noise ratio (CNR) check, data availability check, and vertical gradient of horizontal wind speed check. That is, data sets whose CNR is less than -29 dB, data availability is less than 90%, or vertical gradient of horizontal wind speed is less than $-0.028s^{-1}$ or larger than $0.032s^{-1}$ are classified as 'doubtful', and flagged. The developed quality check algorithm is applied to data obtained at Bucheon station for the period from 1 to 30 September 2015. It is found that the number of 'doubtful' data shows maxima around 2000 m high, but the ratio of 'doubtful' to height-total data increases with increasing height due to atmospheric boundary height, cloud, or rainfall, etc. It is also found that the quality check by data availability is more effective than those by carrier to noise ratio or vertical gradient of horizontal wind speed to remove an erroneous noise data.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.8
• /
• pp.101-107
• /
• 2003

A new mechanical probe for 3-D feature measurement on coordinate measuring machines (CMMs) is presented. The probe is composed of the contact stylus and the three-component force sensor. With the stylus mounted on the force sensor, the probe can not only measure 3-D features, but also detect contact force acting on the stylus tip. Furthermore, the probing direction and the actual contact position can be determined by the relationship among three components of contact force to be detected. In this paper, transformation matrix representing the relationship between the external force acting on the stylus tip and the output voltages of measurement gauges is derived and calibrated. The prototype of probe is developed and its availability is investigated through the experimental setup for calibration test of the probe. A series of experimental results show that the proposed probe can be an effective means of improving the accuracy of touch probing on CMM.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.2
• /
• pp.279-286
• /
• 2013

The recent power shortages due to surge in demand for electricity highlights the importance of smart grid technologies for efficient use of power. The experimental content for vulnerability against availability of smart meter, an essential component in smart grid networks, has been reported. Designing availability protection mechanism to boost the realization possibilities of the secure smart grid is essential. In this paper, we propose a mechanism to detect the availability infringement attack for smart meter and also to find anomaly nodes through analyzing smart grid structure and traffic patterns. The proposed detection mechanism uses approximate entropy technique to decrease the detection load and increase the detection rate with few samples and utilizes the signal information(CIR or RSSI, etc.) that the anomaly node can not be changed to find the anomaly nodes. Finally simulation results of proposed method show that the detection performance and the feasibility.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.6
• /
• pp.551-566
• /
• 1997

Phosphorus has been known as an essential component of animal body. However, the requirement has not been determined precisely because of the variable bioavailabilities of feedstuffs from plant origin. The bioavailability of P in various feedstuffs of plant origin varies from 10 to 60%. Digestibility and availability of the P differed considerably depending on the feed. The lowest values were found for maize (under 20%), the highest for wheat and triticale (over 50%). This is due to the proportion of phytate and the presence of intrinsic phytase. And the digestive tract of monogastric animals does not contain sufficient amounts of phytase, an enzyme that hydrolyses the unavailable phytate complexes to available, inorganic orthophosphates. Microbial phytase supplementation improves the P availability, and both intrinsic plant and microbial phytase improves the availability of P in feedstuffs of plant origin. In a mixture of feeds with low and high activity of intrinsic phytase and/or supplemented by commercial phytase, the P availability is additive. However, in the light of current results it seems that exceeding the P availability equal to 60-70% is unrealizable even at large microbial phytase doses.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.248-256
• /
• 2021

Now that we're in the big data era, data has taken on a new significance as the storage capacity has exploded from trillion bytes to petabytes at breakneck pace. As the use of cloud computing expands and becomes more commonly accepted, several businesses and institutions are opting to store their requests and data there. Cloud storage's concept of a nearly infinite storage resource pool makes data storage and access scalable and readily available. The majority of them, on the other hand, favour a single cloud because of the simplicity and inexpensive storage costs it offers in the near run. Cloud-based data storage, on the other hand, has concerns such as vendor lock-in, privacy leakage and unavailability. With geographically dispersed cloud storage providers, multicloud storage can alleviate these dangers. One of the key challenges in this storage system is to arrange user data in a cost-effective and high-availability manner. A multicloud storage architecture is given in this study. Next, a multi-objective optimization problem is defined to minimise total costs and maximise data availability at the same time, which can be solved using a technique based on the non-dominated sorting genetic algorithm II (NSGA-II) and obtain a set of non-dominated solutions known as the Pareto-optimal set.. When consumers can't pick from the Pareto-optimal set directly, a method based on Principal Component Analysis (PCA) is presented to find the best answer. To sum it all up, thorough tests based on a variety of real-world cloud storage scenarios have proven that the proposed method performs as expected.

• Journal of Nutrition and Health
• /
• v.29 no.9
• /
• pp.1042-1048
• /
• 1996

In order to investigate heating rate of commercial milk products in korean market, lactulose content and availability of calcium and ascorbic acid were measured. The pH range for raw and commercial milk was 6.5-6.75, and protein content was 2.5-3.13%. The acid degree value (。SH)showed between 5.3 and 7.1. There were no differences in pH, protein and acid degree among 3 types of milk. The portion ionic Ca content in UHT-milk(32.4%) and pasteurized milk (27%) increased significantly in comparison with raw milk (4.6%). Pasteurization led to loss of 20% ascorbic acid, and losses of UHT-treatment are approximately twice as high. Significant differences of lactulose content between UHT milk and pasteurized milk were observed. Some of UHT milk products showed very high value of lactulose content like sterilized milk. It is well known that the stress caused by indirect UHT treatment is slightly higher compared with the direct process. The results in this experiment suggested that most of UHT milk in korean market may be treated by indirect UHT method. In oder to keep the adventages of milk component, the heating methods of milk have to be reconsidered.

• Journal of Power Electronics
• /
• v.3 no.3
• /
• pp.145-150
• /
• 2003

Reliability, availability, and cost have been the major concerns for photovoltaic hybrid systems since their beginning as primary sources for much critical applications like communication units and repeaters. This paper descnbes the performance of two hybrid systems, photovoltaic-battery, wind-turbine coupled with the public-grid (PVBWG) hybrid system and photovoltaic-battery, wind-turbine coupled With the diesel generator (PVBWD) hybrid system The systems are sized to power a typical 300W/48V de telecommunication load continuously throughout the year Such hybrid systems consist of subsystems, which in turn consist of components Failure of anyone of these components may cause failure of the entire system. The reliability and availability basics, and estimation procedure for the two proposals are introduced also in this paper. The PVBWG and PVBWD system configurations are shown with the relevant mean-time-between-faIlure (MTBF) and failure rate (${\lambda}$) of each component. The characteristics equations of the two systems are deduced as a function of operating hours and the percentage of sun and wind availabilities per day. The system probability failure as well as the reliability is estimated based on the fault tree analysis technique. The results show that, by using standard or normal components MTBF, the PVBWG is more reliable and the time of periodic maintenance period is more than one year especially in the rich sites of both sun and wind, but PVBWD competes else Also, in the first five years from the system installation, the system is quit reliable and may not require any maintenance. The results show also, as the sun and wind are available, as the system reliable and available.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.4
• /
• pp.451-458
• /
• 2009

This experimental study was conducted to investigate macroscopic characteristics of the flash boiling spray with tow component mixing fuel. Homogeneous Charge Compression Ignition (HCCI) is a newer combustion method for internal combustion engines to reduce nitrogen oxide and particulate matter simultaneously. But it is difficult to put this combustion method to practical use in an engine because of such problems as instability of combustion in low load operating conditions and knocking in high load operating conditions. In HCCI, combustion characteristics and exhaust emissions depend on conditions of air/fuel mixture and chemical reactions of fuel molecules. The fuel design approach is achieved by mixing two components which differ in properties such as density, viscosity, volatility, ignitability and so on. We plan to apply the fuel design approach to HCCI combustion generated in a real engine, and examine the possibility of mixture formation control using the flash boiling spray. Spray characteristics of two component fuel with a flash boiling phenomenon was investigated using Shlieren and Mie scattering photography. Test fuel was injected into a constant volume vessel at ambient conditions imitated injection timing BTDC of a real engine. As a result, it was found that a flash boiling phenomenon greatly changed spray structure, especially in the conditions of lower temperature and density. Therefore, availability of mixture formation control using flash boiling spray was suggested.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.7
• /
• pp.917-925
• /
• 2014

An accurate feed formulation is essential for optimizing feed efficiency and minimizing feed cost for swine and poultry production. Because energy and amino acid (AA) account for the major cost of swine and poultry diets, a precise determination of the availability of energy and AA in feedstuffs is essential for accurate diet formulations. Therefore, the methodology for determining the availability of energy and AA should be carefully selected. The total collection and index methods are 2 major procedures for estimating the availability of energy and AA in feedstuffs for swine and poultry diets. The total collection method is based on the laborious production of quantitative records of feed intake and output, whereas the index method can avoid the laborious work, but greatly relies on accurate chemical analysis of index compound. The direct method, in which the test feedstuff in a diet is the sole source of the component of interest, is widely used to determine the digestibility of nutritional components in feedstuffs. In some cases, however, it may be necessary to formulate a basal diet and a test diet in which a portion of the basal diet is replaced by the feed ingredient to be tested because of poor palatability and low level of the interested component in the test ingredients. For the digestibility of AA, due to the confounding effect on AA composition of protein in feces by microorganisms in the hind gut, ileal digestibility rather than fecal digestibility has been preferred as the reliable method for estimating AA digestibility. Depending on the contribution of ileal endogenous AA losses in the ileal digestibility calculation, ileal digestibility estimates can be expressed as apparent, standardized, and true ileal digestibility, and are usually determined using the ileal cannulation method for pigs and the slaughter method for poultry. Among these digestibility estimates, the standardized ileal AA digestibility that corrects apparent ileal digestibility for basal endogenous AA losses, provides appropriate information for the formulation of swine and poultry diets. The total quantity of energy in feedstuffs can be partitioned into different components including gross energy (GE), digestible energy (DE), metabolizable energy (ME), and net energy based on the consideration of sequential energy losses during digestion and metabolism from GE in feeds. For swine, the total collection method is suggested for determining DE and ME in feedstuffs whereas for poultry the classical ME assay and the precision-fed method are applicable. Further investigation for the utilization of ME may be conducted by measuring either heat production or energy retention using indirect calorimetry or comparative slaughter method, respectively. This review provides information on the methodology used to determine accurate estimates of AA and energy availability for formulating swine and poultry diets.

• Journal of Korea Multimedia Society
• /
• v.18 no.6
• /
• pp.723-733
• /
• 2015

High availability is of utmost importance in real-time embedded systems. Temporary failures due to software or hardware faults should not result in a system crash. To achieve high availability, embedded systems typically use a combination of hardware and software techniques. A watchdog timer is a hardware component in embedded microprocessors that can be used to automatically reset the processor if software anomalies are detected. The embedded system relies on a single watchdog timer, however, can be permanently disabled if the timer is not properly configured, e.g. falling into an indefinite loop. STM32F4 provides two different types of watchdog timer in terms of timing accuracy and robustness. In this paper, we propose a hybrid approach, called long-tail watchdog timer, to utilize both timers to achieve self-reliance in embedded systems even though one of timers fails. Experimental results confirm that the proposed approach successfully handles various failure scenarios and present performance comparisons between single watchdog timer and hybrid approach in terms of configuration parameters of watchdog timers in STM32F4, counter value and window size.