• Journal of Forest and Environmental Science
• /
• v.31 no.1
• /
• pp.24-37
• /
• 2015

Non-timber forest products are important component of subsistence and livelihood of tribal communities living in and near forests. This is of particular significance in the state of Arunachal Pradesh having more than 80% of geographical area under forest cover and predominantly inhabited by tribal people. Purpose of this study was to document the status and utilization pattern and to assess the economic value of NTFPs of the state. Present study was carried out in eight districts of Arunachal Pradesh viz., Changlang, East Kameng, Lower Subansiri, Tawang, Tirap, Upper Siang, West Kameng and West Siang covering 34 villages and 350 households. Altogether, 135 plant based and 36 animal based non-timber forest products were recorded. Among plant based NTFPs, 54 species were collected for leaves, 30 for stem and 22 for fruits. Most of the animal based NTFPs (93%) were collected/hunted for food. Average 20~40 kg of NTFPs was collected annually per household. Maximum plant based NTFP collection was recorded from West Siang followed by West Kameng and Tawang. Similarly, highest collection of animal based NTFPs was recorded from West Siang followed by Tirap and Lower Subansiri. NTFP contributed more than 50% of annual income of the people of East Kameng, Tirap, Lower Subansiri and Upper Siang districts. An illiterate and unemployed person with minimum agricultural land was more dependent on forests for his livelihood than a literate jobholder. The study concludes that a large section of people of Arunachal Pradesh are dependent on NTFPs for their livelihood however due to its unscientific harvesting, the availability of NTFPs is receding with time. There is an urgent need to promote cultivation and scientific harvesting of NTFPs in order to conserve the plant and animal diversity of this global biodiversity hotspot and for ensuring livelihood security of the people living in this area.

• Journal of Biosystems Engineering
• /
• v.38 no.2
• /
• pp.87-94
• /
• 2013

Purpose: Pineapple is now the third most important tropical fruit in world production after banana and citrus. Phytosanitary irradiation is recognized as a promising alternative treatment to chemical fumigation. However, most of the phytosanitary irradiation studies have dealt with physiochemical properties and its efficacy. Accurate dose calculation is crucial for ensuring proper process control in phytosanitary irradiation. The objective of this study was to optimize phytosanitary irradiation treatment of pineapple in various radiation sources using Monte Carlo simulation. Methods: 3-D geometry and component densities of the pineapple, extracted from CT scan data, were entered into a radiation transport Monte Carlo code (MCNP5) to obtain simulated dose distribution. Radiation energy used for simulation were 2 MeV (low-energy) and 10 MeV (high-energy) for electron beams, 1.25 MeV for gamma-rays, and 5 MeV for X-rays. Results: For low-energy electron beam simulation, electrons penetrated up to 0.75 cm from the pineapple skin, which is good for controlling insect eggs laid just below the fruit surface. For high-energy electron beam simulation, electrons penetrated up to 4.5 cm and the irradiation area occupied 60.2% of the whole area at single-side irradiation and 90.6% at double-side irradiation. For a single-side only gamma- and X-ray source simulation, the entire pineapple was irradiated and dose uniformity ratios (Dmax/Dmin) were 2.23 and 2.19, respectively. Even though both sources had all greater penetrating capability, the X-ray treatment is safer and the gamma-ray treatment is more widely used due to their availability. Conclusions: These results are invaluable for optimizing phytosanitary irradiation treatment planning of pineapple.

• Journal of the Korean Society of Food Culture
• /
• v.32 no.4
• /
• pp.311-322
• /
• 2017

This study examined the traditional edible basis and ingredients of Song-gi used for Pyeon of Jong-ga ancestral ritual food. Through an investigation of references, a case study, and ingredient analysis for traditional edible basis of Song-gi, the nutritional value and availability as food material were reviewed. Among the 4 kinds of pine trees from 4,705 types of edible materials usable as food listed in the ${\ll}$Korea Food Standards Codex${\gg}$, 'Pinus radiata D. Don', in which the husk is acknowledged as an edible food, was applied in this study. This study processed the Song-gi following the method of jong-ga and divided into pine inner bark (PIB) and pine inner bark powder (PIBP) to analyze the general composition and dietary fiber. The main composition of PIB was carbohydrate, in which the content was 88.7% per 100 g. The content of dietary fiber was 73.7% per 100 g and the insoluble dietary fiber reached 92.3% in total dietary fiber. In conclusion, the edibility of Song-gi, which has a considerable amount of insoluble dietary fiber caused constipation because it absorbed the moisture in the intestine due to the lack of nutrients but may be developed as a functional food that helps the digestive activation of the intestine and improve the health of the intestine if taken with balanced nutrition.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.253-259
• /
• 2017

Recent development in science and technology has modernized the weapon system of ROKN (Republic Of Korea Navy). Although the cost of purchasing, operating and maintaining the cutting-edge weapon systems has been increased significantly, the national defense expenditure is under a tight budget constraint. In order to maintain the availability of ships with low cost, we need accurate demand forecasts for spare parts. We attempted to find consumption pattern using data mining techniques. First we gathered a large amount of component consumption data through the DELIIS (Defense Logistics Intergrated Information System). Through data collection, we obtained 42 variables such as annual consumption quantity, ASL selection quantity, order-relase ratio. The objective variable is the quantity of spare parts purchased in f-year and MSE (Mean squared error) is used as the predictive power measure. To construct an optimal demand forecasting model, regression tree model, randomforest model, neural network model, and linear regression model were used as data mining techniques. The open software R was used for model construction. The results show that randomforest model is the best value of MSE. The important variables utilized in all models are consumption quantity, ASL selection quantity and order-release rate. The data related to the demand forecast of spare parts in the DELIIS was collected and the demand for the spare parts was estimated by using the data mining technique. Our approach shows improved performance in demand forecasting with higher accuracy then previous work. Also data mining can be used to identify variables that are related to demand forecasting.

• Journal of Adhesion and Interface
• /
• v.3 no.4
• /
• pp.44-52
• /
• 2002

Composite materials are created by combining two or more component to achieve desired properties which could not be obtained with the separate components. The use of reinforcing fillers, which can reduce material costs and improve certain properties, is increasing in thermoplastic polymer composites. Currently, various inorganic fillers such as talc, mica, clay, glass fiber and calcium carbonate are being incorporated into thermoplastic composites. Nevertheless, lignocellulose fibers have drawn attention due to their abundant availability, low cost and renewable nature. In recent, interest has grown in composites made from lignocellulose fiber in thermoplastic polymer matrices, particularly for low cost/high volume applications. In addition to high specific properties, lignocellulose fibers offer a number of benefits for lignocellulose fiber/thermoplastic polymer composites. These include low hardness, which minimize abrasion of the equipment during processing, relatively low density, biodegradability, and low cost on a unit-volume basis. In spite of the advantage mentioned above, the use of lignocellulose fibers in thermoplastic polymer composites has been plagued by difficulties in obtaining good dispersion and strong interfacial adhesion because lignocellulose fiber is hydrophilic and thermoplastic polymer is hydrophobic. The application of lignocellulose fibers as reinforcements in composite materials requires, just as for glass-fiber reinforced composites, a strong adhesion between the fiber and the matrix regardless of whether a traditional polymer matrix, a biodegradable polymer matrix or cement is used. Further this article gives a survey about physical and chemical treatment methods which improve the fiber matrix adhesion, their results and effects on the physical properties of composites. Coupling agents in lignocellulose fiber and polymer composites play a very important role in improving the compatibility and adhesion between polar lignocellulose fiber and non-polar polymeric matrices. In this article, we also review various kinds of coupling agent and interfacial mechanism or phenomena between lignocellulose fiber and thermoplastic polymer.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.973-977
• /
• 2003

Land is the only immovable property that can be used, as a means for agricultural production as well as a means for mortgage for financing industrial or commercial enterprises. Spatial technologies play a key role in managing our land, water and natural resources. Cadastral data is a major component for the development of Land Information System. Therefore, systematic land registration system based on accurate and scientific cadastral map are found inevitable for poverty alleviation, good governance and women empowerment through security of their rights on property, as well as the planning and development of a sustainable environmental protection within Metropolitan city. Digital cadastral parcel is the fundamental spatial unit on which database is designed, created, maintained and operated. Availability of accurate and updated cadastral maps is a primary requisite for successful planning, policy formulating and maintenance of city utility services, which need cadastral and utility information together. Flawed cadastral maps can put land, revenue and taxation system at stake. Kathmandu the capital city of Nepal still is lacking utility maps combining cadastral information with the utility. There is an urgent need to have an effective, accurate and easy to access land revenue and utility services system within the urban areas which could be achieved after the production of reliable base maps and land registration system to guarantee land allocation and property rights which can well be achieved by digital conversion and correction of base cadastral maps. This paper highlights the drawbacks of the conventional cadastral maps and the possible advantages of digital cadastral maps over these. Also the problems, issues and implications during digital conversion and creating database of the same will be discussed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.4
• /
• pp.637-649
• /
• 2011

Soil microorganisms play a major role in improving soil fertility and plant health. Symbiotic arbuscular mycorrhizal fungi (AMF) form a key component of the soil microbial populations. AMF form a mutualistic association with the host plant and exert a positive influence on its growth and nutrient uptake. The establishment of mycorrhizal symbioses with the host plant can positively be influenced by plant growth promoting rhizobacteria through various mechanisms such as increased spore germination and hyphal permeability in plant roots. Though there are evidences that combined interactions between AMF and PGPR can promote the plant growth however mechanisms of these interactions are poorly understood. Better understanding of the interactions between AMF and other microorganisms is necessary for maintaining soil fertility and enhancing crop production. This paper reviews current knowledge concerning the interactions between AMF and PGPR with plants and discusses on enhanced nutrient availability, biocontrol, abiotic stress tolerance and phytoremediation in sustainable agriculture.

• Korean Journal of Plant Resources
• /
• v.31 no.6
• /
• pp.641-651
• /
• 2018

Floral scents and metabolites from cut flowers of 14 peony cultivars (Paeonia lactiflora Pall.) were analyzed to discriminate different cultivars and to compare the Korean cultivar with the other cut peonies imported to Korea using electronic nose (E-nose) and Fourier transform infrared (FT-IR) spectroscopy combined with multivariate analysis, respectively. Principal component analysis (PCA) and discriminant function analysis (DFA) dendrogram of peony floral scents were not precisely same but there were 3 groups including same cultivars. PCA and partial least squares-discriminant analysis (PLS-DA) dendrograms of peony metabolites showed that different cut peony cultivars were clustered into two major groups including same cultivars. Fragrance pattern of Korean 'Taebaek' was classified to same group with 'Jubilee' on the PCA and DFA results and its metabolite pattern was clearly discriminated by the PCA and PLS-DA compared to the other cultivars. These results show that the 14 peony cut flowers could be discriminated corresponding to their chemical relationship and the metabolic profile of Korean 'Taebaek' has distinctive characteristics. Furthermore, we suggest that these results could be used as the preliminary data for breeding new cut peony cultivars and for improving the availability of Korean cut peony in cosmetic industry.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.6
• /
• pp.369-375
• /
• 2020

PURPOSE. This study evaluated the availability of multi-directionally forged (MDF) titanium (Ti) as a component of removable partial dentures (RPDs). MDF-Ti remarkably improved the mechanical properties of RPDs due to its ultrafine-grained structure. MATERIALS AND METHODS. The wear resistance, plaque adhesion, and machinability of MDF-Ti were tested. As controls, commercially pure (CP) titanium was used for wear, plaque adhesion, and machinability tests. For wear resistance, the volume losses of the titanium teeth before and after wear tests were evaluated. Plaque adhesion was evaluated by the assay of Streptococcus mutans. In the machinability test, samples were cut and ground by a steel fissure bur and carborundum (SiC) point. An unpaired t-test was employed for the analysis of the significant differences between MDF-Ti and the control in the results for each test. RESULTS. Wear resistance and plaque adherence of MDF-Ti similar to those of CP-Ti (P>.05) were indicated. MDF-Ti exhibited significantly larger volume loss than CP-Ti in all conditions except 100/30,000 g/rpm in machinability tests (P<.05). CONCLUSION. Although the wear resistance and plaque adherence of MDF-Ti were comparable to those of controls, MDF-Ti showed better machinability than did CP-Ti. MDF-Ti could be used as a framework material for RPDs.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.3
• /
• pp.105-116
• /
• 2018

POPS(Privately Owned Public Spaces) is one of the major component that vitalize the city by private sectors providing open-spaces to the public. It holds great significances and possibilities within CBD(Central Business District) which lack open-space and green-space. Despite of its importance, a large number of problems such as deficient accessibility for the public and being unpractical from constructing only with formality occur in existing POPS. POPS should be for both owners and public because it is a public space located within a private estate. To vitalize POPS, functions like "diversity", "accessibility and connectivity", and "usability" are essential. Providing diverse types of spaces makes dynamic city, and the spaces must have easy access by public and variety of functions. Managements by diverse types of POPS are necessary to improve availability and to provides suitable spaces. To make diverse types of POPS, advanced classifications of type and clear criteria are required. From aspect of accessibility and connectivity, firstly detailed instructions for the arrangement are necessary for reinforcement. Specific research on means of connection such as how many faces of POPS should adjoin streets and in which direction it should be facing should be applied. Purposes of POPS must be specified depending on the type of POPS. By connecting adjacent buildings with POPS, one of the main principal of vitalizing POPS, inflow of people can be increased. Accordingly, improvements of design guidelines in "diversity", "accessibility and connectivity", and "usability" can be suggested to vitalize POPS. With these concerns in mind, this paper analyzes problems of current Seoul POPS guidelines with three aspects.