• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.272-279
• /
• 2002

A common task in assembly modeling is the determination of the position and orientation of a set of components by solving the spatial relationships between them. Assembly models could be constructed at various levels of abstraction. They could be classified into component or geometry-level assembly models. The geometry-level assembly design approach using mating constraints such as against and fits is widely used in the commercial modelers, but it may be very tedious in some cases fur designer. In this paper, we propose a new method to construct an assembly model at the component-level by extracting joint mating features from the kinematics constraints specified between components. The assembly model constructed using the proposed method includes hierarchical and relational assembly models, component/sub-assembly positions and degrees of freedom information. The proposed method is more intuitive and natural way of assembly design and it guarantees the topological robustness of assembly modification such as component replacement and modification.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제30권9호
• /
• pp.812-820
• /
• 2003

복잡한 응용 프로그램의 빠른 개발과 이의 용이한 유지 보수를 지원하기 위하여 재사용 가능 한 컴포넌트 기반 개발(CBD: Component-Based Development) 개념이 확산되고 있다. 이와 관련되어 EJB, COM, CCM 등과 같은 컴포넌트 모델에 대한 연구가 다양하게 진행되고 있으나, 컴포넌트의 궁극적 목표인 재사용 극대화의 입장에서, 아직까지 이미 개발된 컴포넌트들의 유연한 조립은 지원하지 못한다. 이를 해결하기 위해서는 제삼자에 의해 제공된 이질적인 컴포넌트들을 유연하게 재구성 및 조림할 수 있는 상위 레벨의 아키텍처가 필요하며 그러한 아키텍처를 기반으로 구현된 컴포넌트들이 조립되어야 한다. 본 논문은 제삼자에 의해 제공된 이질적인 컴포넌트들을 플러그 앤 플레이 방식으로 유연하게 재구성 및 조립할 수 있도록 아키텍처 기반의 컴포넌트 조립 시스템 설계 및 구현 방법을 제안하고 이를 지원하는 CASE 도구인 Cobalt Assembler를 소개한다.

• ETRI Journal
• /
• 제25권6호
• /
• pp.464-474
• /
• 2003

Component-based development leverages software reusability and reduces development costs. Enterprise JavaBeans (EJB) is a component model developed to reduce the complexity of software development and to facilitate reuse of components. However, EJB does not support component assembly by a plug-and-play technique due to the hard-wired composition at the code level. To cope with this problem, an architecture for EJB component assembly is defined at the abstract level and the inconsistency between the system architecture and its implementation must be eliminated at the implementation level. We propose a component-based application development tool named the COBALT assembler that supports the design and implementation of EJB component assembly by a plug-and-play technique based on the architecture style. The system architecture is first defined by the Architecture Description Language (ADL). The wrapper code and glue code are then generated for the assembly. After the consistency between the architecture and its implementation is checked, the assembled EJB components are deployed in an application server as a new composite component. We use the COBALT assembler for a shopping mall system and demonstrate that it can promote component reuse and leverage the system maintainability.

• 한국콘텐츠학회논문지
• /
• 제5권2호
• /
• pp.275-281
• /
• 2005

컴포넌트 기반 개발의 관점에서 시스템 개발은 코드를 작성하는 대신에 기존의 소프트웨어 컴포넌트들을 조립하는 것으로 대체되고 있으며 컴포넌트 조립에 관한 연구가 활발히 진행되고 있다. 본 논문에서는 컴포넌트 조립을 위하여 컴포넌트 사이의 관계를 명세화하여 정형화하였다. 커넥터를 통하여 컴포넌트를 조립하게 되면 메소드 호출이나 변경 없이 조립이 가능하다. 본 논문에서는 컴포넌트를 연결하는 커넥터 생성을 위한 명세와 제약조건을 정형화 하였으며, 작성된 커넥터 명세와 제약조건을 통하여 커넥터가 자동으로 생성되도록 하였다.

• 한국정밀공학회지
• /
• 제13권6호
• /
• pp.90-101
• /
• 1996

Determination of assembly sequence of components is a key issue in assembly operation. Although a number of articles dealing with assembly sequence determination have appeared, an efficient and general methodology for complex products has yet to appear. The objective of this paper is to present the problems and models used to generate assembly sequence from design data. An essential idea of this research is to acquire a finite number of voxels from any complex geometric entity, such as 3D planar polygons, hollow spheres, cylinders. cones, tori, etc. In order to find a feasible assembly sequence, the following four steps are needed: (1) The components composing of an assembly product are identified and then the geometric entities of each component are extracted. (2) The geometric entities extracted in the first step are translated into a number of voxels. (3) All the mating or coupling relations between components are found by considering relations between voxels. (4) The components to be disassembled are determined using CCGs (Component Coupling Graph).

• 한국컴퓨터정보학회논문지
• /
• 제21권3호
• /
• pp.57-64
• /
• 2016

This paper deals with the PCB assembly time minimization problem that the PAP (pick-and-placement) machine pickup the K-weighted group of N-components, loading, and place into the PCB placement location. This problem considers the rotational turret velocity according to component weight group and moving velocity of distance in two component placement locations in PCB. This paper suggest heavy-weight component group first pick-and-place strategy that the feeder sequence fit to the placement location Hamiltonean cycle sequence. This algorithm applies the quadratic assignment problem (QAP) that considers feeder sequence and location sequence, and the linear assignment problem (LAP) that considers only feeder sequence. The proposed algorithm shorten the assembly time than iATMA for QAP, and same result as iATMA that shorten the assembly time than ATMA.

• 산업공학
• /
• 제22권2호
• /
• pp.165-173
• /
• 2009

This paper considers a two-component assembly system that makes different types of purchasing contracts by component type and studies the issue of coordinating those contracts. Acquisition of type 1 component is based on the long-term contract. In contrast, type 2 component is intermittently purchased under the sort-term contract. We identify the structural properties of the optimal short-term contract and investigate how the changes in system parameters affect the optimal performance. To provide managerial insights, we compare the short-term and long-term contracts for type 2 component and discuss the conditions that make the short-term contract preferable to the long-term contract. We also present a result which shows that coordinating the contracts of type 1 and type 2 components can be significantly profitable over uncoordinating them.

• 제어로봇시스템학회논문지
• /
• 제16권11호
• /
• pp.1089-1095
• /
• 2010

We propose an image segmentation method for auto-teaching system of PCB (Printed Circuit Board) assembly inspection machines. The inspection machine acquires images of all components in PCB, and then compares each image with its standard image to find the assembly errors such as misalignment, inverse polarity, and tombstone. The component window that is the area of component to be acquired by camera, is one of the teaching data for operating the inspection machines. To reduce the teaching time of the machine, we newly develop the image processing method to extract the component window automatically from the image of PCB. The proposed method segments the component window by excluding the soldering parts as well as board background. We binarize the input image by use of HSI color model because it is difficult to discriminate the RGB colors between components and backgrounds. The linear combination of the binarized images then enhances the component window from the background. By use of the horizontal and vertical projection of histogram, we finally obtain the component widow. The experimental results are presented to verify the usefulness of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.250-252
• /
• 1996

In this paper, the principle of operation. the part characteristic, characteristic of component movement, analysis are carried out for camcoder iris assembly which is one of the important element component in Video large projection TV instrument, and some Know-how for development of element component is also included. The magnetic field circuit for the small and simple structure with low power consumption is introduced and new materials of yoke for small motor system is suggested. Especially, the relation with remained magnetic field and operation duration time is analyzed by experimental results. Some problems of nonlinear torque characteristics include to obtain the simple and low cost structure in domestic production of element component is analyzed. Furthermore, development procedure is suggested for iris assembly and some methods to reduce the burr with some check points for small precise accessories are explained.

• 대한산업공학회지
• /
• 제27권4호
• /
• pp.366-373
• /
• 2001

Economic component screening procedures for multi-component assembly products supplied with warranty are proposed. It is assumed that the screening variable is continuous and the performance variable is dichotomous. Logistic and normal models are considered; the proportion of conforming items is a logistic function of the screening variable in the logistic model and the screening variable given the performance variable is normally distributed in the normal model. Cost models are constructed which involve three cost components; screening inspection cost for each component, cost due to disposing a rejected component, and warranty cost for an assembly product. Methods of finding the optimal screening procedures are presented and numerical examples are given.