• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.381-384
• /
• 2002

In speech signal processing, it Is very important to detect the pitch exactly in speech recognition, synthesis and analysis. but, it is very difficult to pitch detection from speech signal because of formant and transition amplitude affect. therefore, in this paper, we proposed a pitch detection using the spectrum flattening techniques. Spectrum flattening is to eliminate the formant and transition amplitude affect. In time domain, positive center clipping is process in order to emphasize pitch period with a glottal component of removed vocal tract characteristic. And rough formant envelope is computed through peak-fitting spectrum of original speech signal in frequency domain. As a results, well get the flattened harmonics waveform with the algebra difference between spectrum of original speech signal and smoothed formant envelope. After all, we obtain residual signal which is removed vocal tract element The performance was compared with LPC and Cepstrum, ACF 0wing to this algorithm, we have obtained the pitch information improved the accuracy of pitch detection and gross error rate is reduced in voice speech region and in transition region of changing the phoneme.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.2
• /
• pp.191-199
• /
• 2019

In this paper, dissimilar friction welding were produced using 15 mm diameter solid bar in chrome molybedenum steel(SCM440) to stainless steel(STS316L) to investigate their mechanical properties. Consequently, optimal welding conditions were n=2000 rpm, HP=70 MPa, UP=140 MPa, HT=10 sec and UT=10 sec when the metal loss(Mo) is 8.6 mm. In addition, an acoustic emission technique was applied to evaluate the optimal friction welding condition. AE parameters including the cumulative count, amplitude and energy showed a various changes according to the friction condition. A continuous type waveforms and low frequency spectrum was presented in friction time. On the other hand, a burst type waveform and high frequency spectrum was exhibited in pressing time.

• Journal of the Korean Solar Energy Society
• /
• v.24 no.2
• /
• pp.89-96
• /
• 2004

PV system is easy to operate and maintain than the other power generating system since it generally contains no moving parts, operates silently and requires very little maintenance. A solar cell generates DC power from sunlight whose power is different at any instance according to condition of irradiation and temperature variables. In order to improve the system utility factor and efficiency of energy conversion, it is desirable to operate the PV system at maximum power point of solar cell under different condition This paper describes the experimental results of the PV system contain solar modules and a DC-DC converter(boost type chopper) using fuzzy controller. The experimental results show that the PV system always operates at maximum power point of solar cells having stabilized output voltage waveform with relatively small ripple component.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.93-96
• /
• 1999

Solar cell generate DC power from sunlight whose power is different at any instance according to condition of variables : insolation and temperature. In order to improve the system utility factor and efficiency of energy conversion, it is desirable to operate the PV system at maximum power point of solar cell under different condition. In this paper, Boost chopper is controlled it output voltage with a new discrete control algorithm for MPPT. PWM signal of DC-DC converter are generated with a 89C51 microcontroller. Switching frequency of DC-DC converter is set at 10KHz. Simulation and experimental results show that the PV system studied in this paper is always operated at maximum power point under different maximum power point of solar cells having stabilized output voltage waveform with relatively small ripple component

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.110-114
• /
• 2012

We studied on the nondestructive evaluation of the elastic wave signal of SiC ceramics and SiC/SiC composite ceramics under monotonic tensile loading. The elastic wave signal of cross and unidirectional SiC/SiC composite ceramics were obtained by pencil lead method and bending test. It was applied for the time-frequency method which used by the discrete wavelet analysis algorithm. The time-frequency analysis provides time variation of each frequency component involved in a waveform, which makes it possible to evaluate the contribution of SiC fiber frequency. The results were compared with the characteristic of frequency group from SiC slurry and fiber. Based on the results, if it is possible to shift up and design as a higher frequency group, we will can make the superior material better than those of exiting SiC/SiC composites.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.64-67
• /
• 2008

To detect islanding mode when the grid is being tripped is a major safety issue in the Utility Interactive Distributed Generation (UIDG) system. In this paper, analytical design method is suggested for AFD & RPV method under IEEE929-2000 recommended islanding test condition. We have discussed that there is a same point. we injected reactive component of the current by AFD & RPV methods, but the current reference generated is other waveform. Possible if amount of reactive components in this methods are same each method, there is happened same rates frequency variation. To verify the validity of the analytical comparison, this paper presents simulation and experimental results from single phase, 3[kW] inverter for the transformerless UIDG system.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.612-621
• /
• 2008

Due to the various constraints such as feasible size of data payload and low transmission power, no technical specifications on the voice communication are included in the Zigbee standard. In this paper, a voice coding technique for application to the IEEE 802.15.4 standard, which is the basis of Zigbee communication, is presented. Here, both high compression and good waveform recovery are essential. To meet those requirements, a multi-stage discrete wavelet transform (DWT) block and a binary coding block consisting of two different pulse-code modulations are exploited. Theoretical analysis and simulation results in an indoor wireless channel show that the voice coder with 2-stage DWT is most appropriate from the viewpoint of compression and waveform recovery. When the line-of-sight component is dominant, the voice coding scheme has good recovery capability even in the moderate signal-to-noise power ratios. Hence, it is considered that the presented scheme will be a technical reference for the future recommendation of voice communication exploiting Zigbee.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.596-601
• /
• 2011

This paper has presented research results for the switching mode class E frequency multiplier that has simple circuit structure and high efficiency. Frequency multiplication is coming from the nonlinearity of the active component, and this paper models the FET active component as a simple switch and some parasitics to analyze the characteristics. The matching component parameters for the class E frequency doubler have been derived with modeling the FET as a input controlled switch and some parasitics. A circuit simulator, ADS, is used to simulate the output voltage and current waveform and efficiency with the variation of the parasitic values. With 2.9GHz input and 2V bias, the drain efficiency has been decreased from 98% to 28% with changing the parasitic capacitance from 0pF to 1pF at 5.8GHz output, which shows that the parasitic capacitance CP has the most significant effect on the efficiency among the parasitics of FET.

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.140-143
• /
• 2003

In order to improve the system utility efficiency of energy conversion, it is desirable to operate the PV system at maximum power point of solar cell under versable condition. This paper describes the experimental results of the PV system that contains a solar modules and DC-DC converter(boost type chopper). The Simulation results show that the PV system always operate at maximum power point of solar cells having stabilize output voltage waveform with relatively small ripple component.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.678-683
• /
• 2003

Ultrasonic method using SH(shear horizontal) wave has been developed to determine the surface damage in fatigued material. Fatigue damages based on propagation energy were analyzed by multiregression analysis and phase measurement in interrupted fatigue test specimen including CrMoV and 12Cr alloy steel. From the test results, as the fatigue damage increased the propagation time of the launched waves increased and amplitude of wavelet decreased. Also, analysis for the waveform modulation showed a reliable estimation, with confidence limit of 97% for 12Cr steel and 95% for CrMoV steel, respectively. Therefore, It is thought that SH ultrasonic wave technique can be applied to determine fatigue damage of in-service component nondestructively.