• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.1
• /
• pp.25-31
• /
• 2008

Information on daily maximum air temperature is important in predicting the status of plants and insects, but the uneven and sparse distribution of weather stations prohibits timely access to the data in regions with complex topography. Since cumulative solar irradiance plays a critical role in determining daily maximum temperature on any sloping surfaces, derivation of a quantitative relationship between cumulative solar irradiance and the resultant daily maximum temperature is a prerequisite to development of such estimation models. Air temperatures at 8 sideslope locations with similar elevation and slope angle but aspect, circumventing a cone-shaped, grass-covered parasitic volcano (c.a., 570 m diameter for the bottom circle and 90m bottom-to-top height), were measured from June to December in 2007. Daily maximum temperatures from each location were compared with the average of 8 locations (assumed to be the temperature measured at a "horizontal reference" position). The temperature deviation at all locations increased with the day of year (or sun elevation) from summer solstice to winter solstice. Averaged over the entire period, the south facing location was warmer by $1^{\circ}C$ in daily maximum temperature than "horizontal reference" and the north facing location was cooler by $0.8^{\circ}C$ than the reference, resulting in the year round average south-north temperature difference of $1.8^{\circ}C$. In November, both south and north facing slopes showed the greatest deviation of $+2.0^{\circ}C$ and $-1.3^{\circ}C$, respectively in daily maximum temperature at monthly scale. On a daily scale, the greatest deviation was +3.8 and $2.7^{\circ}C$ at the south and north slope, respectively. The cumulative solar irradiance (on the slope for 4 hours from 11:00 to 15:00 TST) explained >60% of the variance in daily maximum temperature deviations among 8 locations, suggesting a feasibility of developing an estimation model for daily maximum temperature over complex topography at landscape scales.

• Korean Journal of Remote Sensing
• /
• v.34 no.5
• /
• pp.749-762
• /
• 2018

In this study, the changes of the sunshine environment due to the construction of buildings were analyzed by season. Using a geographic information system (GIS) data, the topography and the buildings were constructed around Pukyong National University (PKNU) in Busan. The numerical model was performed for a week in each season, before and after the construction of buildings. Even before the construction of the high-rise building complex, the area of sunshine block is wide due to the apartment complex located in the southeast of the PKNU campus and the mountain in the south. After the construction, the sunshine-blocked area became wider after the sunrise and before the sunset. The area of sunshine block after 1 hour at sunrise increased by 1.60%, 1.50%, 1.58% and 1.36% in the vernal equinox, summer solstice, autumnal equinox and winter solstice, respectively. The building complex in the east (south) of the PKNU campus made shadow in more than 1,000 m (750 m) toward the west (east) just before the sunrise (sunset). Especially, the sunshine duration in PKNU campus decreased by 46.61%, 22.75%, 58.56%, and 11.31% in the vernal equinox, summer solstice, autumnal equinox and winter solstice, respectively. The analysis of the sunshine duration for a dormitory building showed that the construction of the building complex in the south of the PKNU campus reduced the sunshine area of the western (southern) wall of the dormitory by 30.91% (49.45%) for a winter week.

• Geophysics and Geophysical Exploration
• /
• v.15 no.2
• /
• pp.57-65
• /
• 2012

Various numerical methods in simulation of seismic wave propagation have been developed. Recently an innovative numerical method called as the Spectral Element Method (SEM) has been developed and used in wave propagation in 3-D elastic media. The SEM that easily implements the free surface of topography combines the flexibility of a finite element method with the accuracy of a spectral method. It is generally used a weak formulation of the equation of motion which are solved on a mesh of hexahedral elements based on the Gauss-Lobatto-Legendre integration rule. Variational formulations of velocity-stress motion are newly modified in order to implement ADE-PML (Auxiliary Differential Equation of Perfectly Matched Layer) in wave propagation in 3-D elastic media, because a general weak formulation has a difficulty in adapting CFS (Complex Frequency Shifted) PML (Perfectly Matched Layer). SEM of Velocity-Stress motion having ADE-PML that is very efficient in absorbing waves reflected from finite boundary is verified with simulation of 1-D and 3-D wave propagation.

• Spatial Information Research
• /
• v.20 no.4
• /
• pp.29-36
• /
• 2012

The low-carbon freight transportation system was introduced due to increase traffic congestion cost and carbon-dioxide for global climate change according to expanding city logistics demands. It is necessary to create 3D-based road network map for representing realistic road geometry with consideration of fuel consumption and carbon emissions. This study propose that 3D road network model expressed to realistic topography and road structure within trunk road for intercity freight through overlaying 2D-based transport-related thematic map and 1m-resolution DEM. The 3D-based road network map for the experimental road sections(Pyeongtaek harbor-Uiwang IC) was verified by GPS/INS survey and fuel consumption simulation. The results corresponded to effectively reflect realistic road geometry (RMSE=0.87m) except some complex structure such as overpass, and also actual fuel consumption. We expect that Green-based freight route planning and navigation system reflected on 3D geometry of complex road structure will be developed for effectively resolving energy and environmental problems.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.441-448
• /
• 2011

Lately, digital restitution was became common using digital aerial photos. Therefore, we can obtain three-dimensional data. As a plotting-maker is checked by naked eye, plotting original data is very useful for making reliable three-dimensional data including contour and elevation point layers. In this study, we want to make precise and accurate digital elevation model using plotting original data. Contour and elevation point layers was extracted in digital map and break line was extracted in plotting original data. And then, compared both of results. For comparison, we selected slight slope and complex topography area like a residence area, mountain and agricultural land. We extracted break line deleting layer until obtaining ideal digital elevation model. As the results, We could extract contour, elevation points, eight road and two boundary layers using break lines. And We could obtain precise elevation model. Editing break lines, the distortion of digital elevation model could be minimized in the complex and sharp slope area.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.1
• /
• pp.15-25
• /
• 2009

Donghae city is one of the most representative cement industrial city in Korea. The area is faced with the East Sea to the East and with high montane region of Tae-Back mountain range to the West. Many pollutant sources of air pollution are located near the coast, but the largest point sources of the region are located at the bottom of the mountain area in Donghae city. The local wind is highly affected by local topography and plays an important role in transport and dispersion of contaminants from the pollution sources. This study was designed to evaluate enhancement of MM5 predictions by using Four Dimensional Data Assimilation (FDDA), the SONDE data and the national meteorological station, data only. The alternative meteorological fields predicted with and without FDDA were used to simulate spatial and temporal variations of NOx in combined with Atmospheric Dispersion Models (CALPUFF). For the modeling domain, the alternative meteorological fields with 1.1 km spatial resolution were interpolated to the CALMET with 0.5 km resolution. The vertical layers set to have 35 and 12 layers for MM5 and CALPUFF, respectively. MM5 with the FDDA did not resulted in significant improvement of meteorological field prediction in Donghae region, which is primarily because of complex geography and wind scheme. The result of CALPUFF, however, showed reduction of uncertainty errors by using the interpolation scheme of the actual measurement data.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.6 s.113
• /
• pp.109-126
• /
• 2006

As the national interest in sports has been increased over time, sports facilities and sports complex are considered more than just physical environments for training athletes or watching games. Sports facilities now become symbolic spatial devices to represent the national and cultural pride of any countries. The existing national training camp located in Taenung, Seoul is gotting outdated and degraded. The polluted air in the city risks athletes' health condition. The government planned to construct the second training camp at Jincheon, Chungbuk at the area of $2,171,910m^2$. The Korea Sports Council called for proposals to envision the future training camp, and they held a design competition from August to November, 2005. The first phase was to present the masterplan for the entire site including training buildings, outdoor training facilities, dormitories, a visitor center, a research center, education and administration buildings. Considering the size of the site, the planning process required a strong relationship between landscape and architecture. This study tries to provide general explanations on the winning proposal focused on the landscape-related issues. It also attempts to have reference points for contemporary planning and design issues to situate the project in the stream of continuing design effort to avoid the dichotomy between nature and culture. The landscape proposal for the new national taming camp suggests four main strategies; 1) The camp has two intersecting and interweaving parks which represent the natural and urban order. 2) The entire site is organized and networked by the flow of landscape called landscape ribbon in terms of topography, vegetation, and water flow. 3) The landscape is choreographed through the time and process. 4) The ecological process and the digital contents are juxtaposed in the landscape. This winning proposal is the first step to portray the national vision for the sustainable environment coexisting with sports industry. Landscape in this proposal is an active agent to network various parts of the site which enables landscape to be infrastructure. Landscape design in this proposal should be considered open-ended strategies rather than determined concrete forms and its engaging further development will be tested in following Design-Build phase.

• Journal of Radiation Protection and Research
• /
• v.28 no.2
• /
• pp.97-108
• /
• 2003

A three-dimensional wind field model based on the variational technique has been developed for estimating the overall wind patterns over a complex terrain. The three-dimensional elliptic partial differential equations on Cartesian and terrain-following coordinates have been established to obtain the Lagrangian multiplier and the adjusted wind velocity. The simulations were performed to evaluate the variations of the velocity vectors on the hemisphere, half-cylinder, and saddle type obstacles. Also, the wind field model in the terrain-following coordinate has been applied for evaluating the characteristics of wind patterns according to the variations of Gauss precision moduli on the hemispheric topography. The results showed that the horizontal and vertical wind components were strongly governed by the selection of the values of Gauss precision moduli.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.3
• /
• pp.133-140
• /
• 2002

Site-specific minimum temperature forecasts are critical in a short-term decision making procedure for preventive measures as well as a long-term strategy such as site selection in fruits industry. Nocturnal cold air pools frequently termed in mountainous areas under anticyclonic systems are very dangerous to the flowering buds in spring over Korea, but the spatial resolution to detect them exceeds the current weather forecast scale. To supplement the insufficient spatial resolution of official forecasts, we developed a GIS - assisted frost risk assesment scheme for using in mountainous areas. Daily minimum temperature data were obtained from 6 sites located in a 2.1 by 2.1 km area with complex topography near the southern edge of Sobaek mountains during radiative cooling nights in spring 2001. A digital elevation model with a 10 m spatial resolution was prepared for the entire study area and the cold air inflow was simulated for each grid cell by counting the number of surrounding cells coming into the processing cell. Primitive temperature surfaces were prepared for the corresponding dates by interpolating the Korea Meteorological Administration's automated observational data with the lapse rate correction. The cell temperature values corresponding to the 6 observation sites were extracted from the primitive temperature surface, and subtracted from the observed values to obtain the estimation error. The errors were regressed to the flow accumulation at the corresponding cells, delineating a statistically significant relationship. When we applied this relationship to the primitive temperature surfaces of frost nights during April 2002, there was a good agreement with the observations, showing a feasibility of site-specific frost warning system development in mountainous areas.

• Ocean Science Journal
• /
• v.43 no.4
• /
• pp.175-182
• /
• 2008

Bottlenose dolphins are the only cetaceans regularly observed in the northern Adriatic Sea, but they survive at low densities and are exposed to significant threats. This study investigates some of the factors that influence habitat use by the animals in a largely homogeneous environment by combining dolphin data with hydrological and physiographical variables sampled from oceanographic ships. Surveys were conducted year-round between 2003 and 2006, totalling 3,397 km of effort. Habitat modelling based on a binary stepwise logistic regression analysis predicted between 81% and 93% of the cells where animals were present. Seven environmental covariates were important predictors: oxygen saturation, water temperature, density anomaly, gradient of density anomaly, turbidity, distance from the nearest coast and bottom depth. The model selected consistent predictors in spring and summer. However, the relationship (inverse or direct) between each predictor and dolphin presence varied among seasons, and different predictors were selected in fall. This suggests that dolphin distribution changed depending on seasonal forcing. As the study area is relatively uniform in terms of bottom topography, habitat use by the animals seems to depend on complex interactions among hydrological variables, caused primarily by seasonal change and likely to determine shifts in prey distribution.