• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.4
• /
• pp.715-719
• /
• 1996

Dietary fibers consist mostly of complex carbohydrates such as cellulose, hemicelluloses and pectins, and also included are carbohydrate-based gums or hydrocolloids exampled as alginate, carrageenan, galactomannan xanthan, etc. Due to structural diversity, dietary fibers can be classified by various ways i.e., source, plant function, solubility, charge and topology. Understanding on the plant cell wall structure is of primary importance, since physicochemical properties of dietary fibers are dependent on the existence patterns in the cell wall. Depending on the four distinct observational dimensions, the physical parameters of dietary fibers were discussed in terms of raw sources, bulky & complex plant cell wall materials, individually separated hydrocolloid materials and specifically designed materials. Each existence state possesses the distinct physical parameters governing a variety of physiological properties of dietary fibers.

• Journal of Environmental Science International
• /
• v.16 no.1
• /
• pp.27-32
• /
• 2007

In this study, the concentrations of offensive odorous compounds seasonally emitted from the chemical plant at Chongju industrial complex in Korea were determined by the analytical methods of gas chromatography, high performance liquid chromatography and uv/vis spectroscopy. The kinds of offensive odorous compounds examined are formaldehyde, acetaldehyde, butyl aldehyde, propion aldehyde, n-valeric aldehyde, iso-valeric aldehyde, hydrogen sulfide, methyl mercaptan, dimethyl sulfide, dimethyl disulfide, trimethyl amine and ammonia. The seasonally emission levels of all odorous compounds except dimethyl sulfide at 13 sampling points of plant were lower than those of the regulation standard levels of the industrial complex in Korea. The levels were the highest in June, and lowest in December. The propion aldehyde and iso-valeric aldehyde in June and December, butyl aldehyde in December, and n-valeric aldehyde were not detected in all the three seasons at any sampling points of the plant examined. But in June, dimethyl sulfide was emitted up to 16 times than that of the regulation level.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.235-240
• /
• 2005

Recently urban utility plants in urban areas of Korea, such as energy supply systems, municipal waste incineration systems, sewage treatment systems and so on, have caused some critical troubles, for instance the insensitive response to the seasonal or daily variation of loads, the low system efficiency and inefficient use of energy because of the large-scale system located a great distance. Therefor the design method of optimal integrated system model of various urban utility plants proposed in this study suitably to the present situation of Korea. Also, the effect analysis for the introduction of compound utility plants was studied for a new town model on a 60,000 persons scale. As the results we found that the complex plant was superior to individual urban utility plant in side of the initial investment expenses, the operating cost and other reasons.

• Korean Journal of Plant Tissue Culture
• /
• v.21 no.6
• /
• pp.363-367
• /
• 1994

In an effort to investigate the role of calmodulin (CaM) as a modulating molecule in the signal transduction system in plant cells, we established methods for introduction of purified CaM into cultured soybean cells. CaM was purified from bovine testis, and was labelled with fluorescein isothiocyanate (FITC). Suspension -cultured cells were healed with saponin (0.1 mg/mL) to permeabilize the plasma membrane and coincubated with FITC-CaM complex. Saponin pretreatment was found to increase the fluorescence in the suspension cultured cells, indicating that the FITC-CaM complex could be incorporated into the cytoplasm. Optimal conditions for introducing FITC-CaM complex into protoplasts by electroporation were established with various electric pulses. With increasing field strength, the fluorescence in the protoplase was increased, while the viability of the protoplase decreased. FITC-CaM complex was successfully introduced into the protoplasts by electroporation and the amount of FITC-CaM complex in the protoplase was estimated.

• Journal of Environmental Science International
• /
• v.33 no.2
• /
• pp.161-168
• /
• 2024

This study was conducted to identify the pollutants generated by the fuel complex and to determine the health effects of the surrounding residents. In addition, based on the results of epidemiological surveys and health impact surveys of local residents, we analyze the distribution of patient groups and exposure characteristics according to the distance from the fuel complex boundary. Samples were collected from the briquette plant within the fuel complex and analyzed by SEM-EDXA, X-ray Fluorescence Spectrometer, and ICP. In addition, the distribution of patients and exposure characteristics were analyzed according to the distance from the fuel complex and yard boundaries. Analysis of briquette samples from the fuel complex showed that the average particle size was 10-30 ㎛, the shape was irregular, and SiO₂ accounted for more than 50%. It is believed that silica, which causes pneumoconiosis, may have been scattered into the air. In particular, there was a large distribution of 5 ㎛ particles that affect respiratory diseases. According to the analysis of the residential addresses and distribution of pneumoconiosis cases, many pneumoconiosis cases were located in the area between 200 and 500 meters from the boundary of the fuel complex. In addition, 28 pneumoconiosis cases were identified as a result of the epidemiological survey and health impact survey at the fuel complex. In detail, there were 8 cases of occupational pneumoconiosis, 6 cases of environmental pneumoconiosis, and 14 cases of occupational and environmental pneumoconiosis. The confirmed pneumoconiosis cases were located between 0.3 and 1.1 kilometers from the fuel complex. It was found that environmental pollutants generated by the fuel complex adversely affect the health of local residents. In particular, there are many cases of pneumoconiosis in the area between 200 and 500 meters from the boundary of the fuel complex, and this distance is considered to be the direct and indirect impact zone of the briquette plant.

• Proceedings of the Botanical Society of Korea Conference
• /
• 2001.04a
• /
• pp.24-24
• /
• 2001

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2021.04a
• /
• pp.113-113
• /
• 2021

• Journal of Species Research
• /
• v.1 no.2
• /
• pp.232-239
• /
• 2012

Taxonomy of umbelliferous taxa Heracleum moellendorffii complex has been unclear in their species delimitation in the far-eastern Asian regions. In both Korea and China Heracleum moellendorffii was adopted for their description while H. sphondylium was chosen to describe Japanese Heracleum. From Genbank accessions, taxa collected from Kamtchatka and Promorskiy, Russia were defined as H. maximum, endemic taxon to North America. In this study, we reviewed the taxonomy of Heracleum moellendorffii complex in Korea and neighboring countries on the basis of molecular phylogenies derived from sequences of nuclear ribosomal DNA internal transcribed spacer (ITS) regions. From three Korean accessions of Heracleum investigated in this study, two types of ITS sequences were obtained; two accessions were related to Chinese H. moellendorffii var. moellendorffii and North American H. maximum without forming a clade while the other one was identical to accession from H. maximum from Primorskiy, Russia. In the other hand, Japanese H. moellendorffii (=H. sphondylium ssp. sphondylium var. nipponicum in the flora of Japan) was closely related to H. maximum accessions from Korea and Russia, not nested within the clade comprising several subspecies of H. sphondylium. In order to delimit species boundaries among putatively closely related Heracleum species in fareastern Asian countries, more samples and much more rapidly evolved DNA regions must be investigated with interpretation of morphological and anatomical features.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.1
• /
• pp.66-76
• /
• 2008

Plant project is a complex project that consists of civil engineering, building, mechanical and electronic works. The schedule management is one of important factors in plant project because the construction duration of the project is very short comparing with the other construction projects. Specially, 4D CAD system needs to visualize construction schedule information in those complex projects. This study suggests methodologies for improving 4D CAD functions by considering those project characteristics. To develop a plant 4D CAD system, this study includes to develop new functions by analyzing actual schedule information from the plant construction sites.

• The Plant Pathology Journal
• /
• v.33 no.3
• /
• pp.213-228
• /
• 2017

Plasmodesmata (PDs) are specialized intercellular channels that facilitate the exchange of various molecules, including sugars, ribonucleoprotein complexes, transcription factors, and mRNA. Their diameters, estimated to be 2.5 nm in the neck region, are too small to transfer viruses or viral genomes. Tobacco mosaic virus and Potexviruses are the most extensively studied viruses. In viruses, the movement protein (MP) is responsible for the PD gating that allows the intercellular movement of viral genomes. Various host factors interact with MP to regulate complicated mechanisms related to PD gating. Virus replication and assembly occur in viral replication complex (VRC) with membrane association, especially in the endoplasmic reticulum. VRC have a highly organized structure and are highly regulated by interactions among the various host factors, proteins encoded by the viral genome, and the viral genome. Virus trafficking requires host machineries, such as the cytoskeleton and the secretory systems. MP facilitates the virus replication and movement process. Despite the current level of understanding of virus movement, there are still many unknown and complex interactions between virus replication and virus movement. While numerous studies have been conducted to understand plant viruses with regards to cell-to-cell movement and replication, there are still many knowledge gaps. To study these interactions, adequate research tools must be used such as molecular, and biochemical techniques. Without such tools, virologists will not be able to gain an accurate or detailed understanding of the virus infection process.