• 제목/요약/키워드: Complex oil

검색결과 312건 처리시간 0.03초

식품가공폐유를 이용한 비누의 계면활성과 세척성에 관한 연구 (A Study on the Surface Activity and Detergency of the Soap Made from the Waste Oil from Food Manufacturing Proces)

  • 정명섭;유덕환
    • 한국의류학회지
    • /
    • 제18권5호
    • /
    • pp.661-673
    • /
    • 1994
  • We have gathered a fatty acid to recycle the waste oil of food manufacturing process, and then made a soap from the waste oil by alkali saponification. Effects of the washing elements such as the concentration of the soap, temperature and time were evaluated to find out the optimum washing conditions, and results are as follows. 1. We could find soaps made from the soybean oil (A), corn oil (B), rape seed salad oil (C), cotton seed oil (D) and a soap consisting of the each oil 25% respectively (I) had the lowest surface tension at the concentration of 0.225% -0.25%. Compared with the single fatty-acid soap, the multi-component soap I showed the lower surface tension at the cmc. 2. All the samples of A-I showed the lowest contact angle for the solid material at the concentration of 0.25%. The multi-component soap of I showed higher contact angle than the single.component soaps of A, B, C and D. 3. The soap G, made from the waste oil, show lower surface tension than 5, made from the complex raw fats of the eatable fatty oil acid and H, commercial soap. 4. The washing efficiency depends on the washing time. Especially the 25-minute was found to be the optimum washing time. 5. The highest washing efficiency was found at the 0.25% cont. reagardless of the washing temperature. At 0.15% concentration level the washing efficiency reduces as washing tem- perature increases. At 0.3% concentration level the highest washing efficiency was found between $50^{\circ}$-$60^{\circ}$. 6. The soap made from the waste oil showed the highest washing efficiency in terms of concentration, temperature, and time. 7. The soap made from the waste oil showed the similiar concentration of hydrogen ion to the synthetic detergent. 8. The hand value of the fabric washed by the soap made from the waste oil was a little lower value than those washed by the synthetic detergent.

  • PDF

개에서 DNCB에 의해 유발된 알레르기성 접촉피부염에 대한 아로마 오일 합제의 항염증 효과 (Anti-inflammatory Effects of Aroma Oil Complex on DNCB-Induced Allergic Contact Dermatitis in Dogs)

  • 오동규;오태호
    • 한국임상수의학회지
    • /
    • 제31권3호
    • /
    • pp.180-193
    • /
    • 2014
  • 알러지성 접촉피부염은 T세포와 대식세포가 관여하는 세포매개성 면역반응으로 항원에 노출된 뒤 수 일 후에 증상이 발현되는 지연형 반응으로 특이 T세포의 활성을 통해 다양한 cytokine이 분비되어 항원 유입부위로 염증세포의 유주로 염증이 발생한다. 본 연구에서는 DNCB로 유발한 알러지성 접촉피부염에 대한 아로마 오일 합제의 항염효과를 평가하였다. 아로마 오일 합제는 8일간 적용하였고 실험기간 동안 2일 간격으로 피부 생물리학적 지표를 측정한 후 피부생검을 통해 피부조직을 평가하였다. DNCB 적용 후 피부 생물리학적 지표인 표피경유수분손실, 피부 수화도, 피부 두께 그리고 홍반지수가 증가하였다 (p < 0.05). 피부조직 평가에서 염증세포 침윤과 부종성 변화에 의한 상피두께 증가 및 진피 결합조직의 감소가 특징적으로 나타났다. 또한 진피내 pro-inflammatory cytokine인 TNF-${\alpha}$와 IFN-${\gamma}$ 면역반응세포수 및 표피내 apoptotic change의 지표인 caspase-3와 PARP 면역반응세포의 수가 유의적으로 증가 하였다 (p<0.01). 그러나 아로마 오일 합제 적용후에는 피부 생물리학적 지표 (p<0.05) 및 피부조직의 병리적 변화는 (p<0.01) 기저상태로 회복되었다. 따라서 본 연구를 통해 개에서 DNCB에 의한 알레르기성 접촉피부염 유발 및 아로마 오일 합제의 우수한 항염증 효과를 확인하였고 아로마 오일 합제는 향후 피부염에 대한 치료제로 사용할 수 있을 것으로 기대된다.

Asphaltene의 구조특성과 화학적 처리에 의한 분해특성 (Characteristics of Asphaltene Structure and its Decomposition by Chemical Treatments)

  • 이창환;윤병대;정덕영;이효진
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2001년도 총회 및 춘계학술발표회
    • /
    • pp.57-61
    • /
    • 2001
  • 일반적으로 Asphaltene은 원유뿐만 아니라 화석연로원(Fessil Fuel Sources)에도 포함되어 있는 것으로 알려져 있으며 난분해성으로 탄화수소(Hydrocarbon)와 Heterocyclic 또는 N-, S-, 산소를 포함하는 화합물이다. 그리고 금속성 물질이 Asphaltene Fraction에 농축되어 있는 것으로 알려져 있다. 한편 이러한 metallo-complex는 Asphaltene의 구조화합물중 방향족계 sheet 사이에 Self-association 상태로 존재한다. Asphaltene의 분해는 일반 TPH나 BTEX계 유류의 분해 기작과는 매우 상이하며 현재까지 Asphaltene으로 오염된 토양의 복원 기술을 매우 미미한 것으로 알려져 있다. 따라서 본 연구는 Asphalteme으로 오염된 토양의 복원 기숙을 개발하기 위한 전단계로 Asphaletene의 구성물질과 저분자화 작용기작을 구명하여 효과적 복원기술 개발을 위하여 Arabian Light Oil에서 Oil 자체와 Oil에서 분리해낸 Asphaltene을 사용하여 용매조건과 처리제별로 저분자화 과정을 조사하였다.

  • PDF

Optimum Design of Packaged Skid for Oil & Gas Plant

  • 최황근;신현경
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
    • /
    • pp.269-272
    • /
    • 2006
  • The use of packaged skid in oil and gas plant has increased dramatically over the decades, replacing loose supply equipment. Most equipment is installed on structural skid in manufacturer's shop. As Oil and Gas Plants are constructed at inaccessible area, the demands of packaged skids are increased. The packaged skid have advantages comparing to loose supply equipment in inaccessible area. The packaged skid is small complex plant consists of process, mechanical, piping, instrument, electrical and structural steel. This paper examines advantages and problems of packaged skid, based on previous experience. EPC company consider key factors such as manufacturing period, construction periods, equipment quality and costs.

  • PDF

땅콩의 품질평가 현황과 전망 (Review of the Studies on the Qualities in Peanut)

  • 박장환;박희운
    • 한국작물학회지
    • /
    • 제47권
    • /
    • pp.163-174
    • /
    • 2002
  • Peanut is one of the principal oil seeds in the world as a rich source of edible oil and protein. Peanut quality arises as a result of a complex interaction of genetic, physiological and biochemistry processes that produce the chemical composition of the peanut seed. The major factors influencing seed quality are degree of maturity and digging and drying, curing and storage as a series of harvesting. The end products, peanut butter, salted seed, confections, roasting stock and by-products are favored in world-wide because of their unique roasted peanut flavor, Literatures are reviewed mainly focusing on the physiological properties and nutritional quality of oil, protein and flavor in peanut. Chemical properties of protein and oil, and volatile flavor component in peanut seeds are studied. The objectives of this paper were to review and summarize the results obtained from the improving quality breeding program and evaluation of the chemical composition in peanut up to now.

INFLUENCE OF GEAR OIL FORMULATION ON OIL TEMPERATURE

  • Wienecke, D.;Bartz, W.J.
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
    • /
    • pp.311-312
    • /
    • 2002
  • Friction losses in complex tribo-technical system are revealed primarily through their effect on the operating temperature level. In order to assess the influence of the oil formulation on the temperature level comprehensive tests were run in a model test apparatus consisting of a special adapter for the 4-ball test rig. More than ten with different formulations (different base oils, additive packages and viscosity modifiers) were tested, The resulting temperature levels varied by nearly 25 %. The objective of this model testing is to assess the influence of the oil formulation on the operating temperature of vehicle manual transmission. The correlation to the real tribotechnical system was confirmed by a VW Polo transmission test.

  • PDF

내연기관의 엔진오일상태에 대한 유전율 변화 특성 (Characteristics of Variant Dielectric Constants With Respect to Internal Combustion Engine Oil States)

  • 김동민;김영주;이승희
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제15권1호
    • /
    • pp.19-21
    • /
    • 2012
  • 내연 기관의 엔진오일은 열화작용에 의해서 수명이 짧아지고 대기오염을 유발하게 된다. 엔진오일의 상태를 정확히 측정하여 새오일로 교환함으로 엔진의 수명 연장 및 환경오염을 줄일 수 있다. 정전용량 프로브는 엔진오일과 같은 유체의 유전율을 측정하는데 사용 할 수 있다. 본 논문은 엔진 오일의 열화 정도에 따라서 달라지는 유전율 특성을 분석하였다. 오일의 상태에 따라서 달라지는 프로브의 정전용량을 각각 LCR Meter로 측정하여 엔진오일의 유전율을 계산하였다. 또한, 프로브의 크기에 따른 정전용량의 변화를 측정하여 유전율 측정의 정확도를 제시한다. 오염된 오일 일수록 유전율이 증가하며, 유전율로 오일의 오염정도를 판단하는 것이 가능하다.

Analysis on Monopole Antenna for Moisture Determination in Oil Palm Fruit Using Finite Difference Method

  • Cheng, E.M.;Abbas, Z.;Rahim @ Samsuddin, H.A.;Lee, K.Y.;You, K.Y.;Hassan, J.;Zainuddin, H.;Khor, S.F.
    • Journal of Electrical Engineering and Technology
    • /
    • 제11권6호
    • /
    • pp.1754-1762
    • /
    • 2016
  • Finite difference analysis were applied to study the principle operation of monopole antenna for moisture determination in oil palm fruit at 2 GHz. The electromagnetic field interact with oil palm fruit on the interface between the antenna and oil palm fruit and cause a reflection. The reflection measurement is based on mismatch impedance or dielectric properties between two media. Reflection coefficient is used to quantify the level of reflection. The monopole antenna was made of RG405/U semi-rigid coaxial cable with an inner and outer diameter of 0.45 mm and 1.50 mm, respectively with 2.23 mm length of protruding conductor over 5.66 cm length of monopole antenna. This monopole antenna for moisture detection was compared with induced EMF method in terms of reflection coefficient at 2 GHz. The results show that the complex reflection coefficient measured using monopole antenna provides significant results to predict moisture content in oil palm fruit.

Data Interpretation Methods for Petroleomics

  • Islam, Annana;Cho, Yun-Ju;Ahmed, Arif;Kim, Sung-Hwan
    • Mass Spectrometry Letters
    • /
    • 제3권3호
    • /
    • pp.63-67
    • /
    • 2012
  • The need of heavy and unconventional crude oil as an energy source is increasing day by day, so does the importance of petroleomics: the pursuit of detailed knowledge of heavy crude oil. Crude oil needs techniques with ultra-high resolving capabilities to resolve its complex characteristics. Therefore, ultra-high resolution mass spectrometry represented by Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) has been successfully applied to the study of heavy and unconventional crude oils. The analysis of crude oil with high resolution mass spectrometry (FT-ICR MS) has pushed analysis to the limits of instrumental and methodological capabilities. Each high-resolution mass spectrum of crude oil may routinely contain over 50,000 peaks. To visualize and effectively study the large amount of data sets is not trivial. Therefore, data processing and visualization methods such as Kendrick mass defect and van Krevelen analyses and statistical analyses have played an important role. In this regard, it will not be an overstatement to say that the success of FT-ICR MS to the study of crude oil has been critically dependent on data processing methods. Therefore, this review offers introduction to peotroleomic data interpretation methods.

Synlube 제조에 관한 연구(I)

  • 김종호
    • Tribology and Lubricants
    • /
    • 제5권2호
    • /
    • pp.7-20
    • /
    • 1989
  • 합성윤활유(synthetic lubricant)라 함은 현재까지도 계속되고 있는 광유(mineral oil) 전성시대의 광유에 대응되는 말로써 광유계 윤활유로 부터 얻기 어려운 높은 점도지수, 우수한 저온 유동성 등의 특성을 얻기 위해 유기합성방법에 의해 인위적으로 제조한 윤활유의 총칭이며 작용기의 종류, 합성방법, 등에 따라 다양하게 분류된다. 합성윤활유의 종류에는 합성방법에 따라 폴리머형(P형), 비폴리머형(N형)으로 대별되는데, 폴리머형 합성유에는 poly-butene, poly-$\alpha$-olefin, Polyalky lenglycol, Silicon oil, Chlorofluorocarbon, Perfiuoroalkylpolyether 등이 있으며, 비폴리머형 합성유에는 Alkylbenzene, Dibasicacidester, Polyolester, Silicate-ester Polyphenylether, Complex ester 등이 포함된다. 전자의 경우에는 중합반응 조건을 조절하므로써 여러점도 등급의 합성유들을 얻을 수 있는 반면 후자의 경우에는 분자량이 크지 않으므로 저점도의 것만 얻어지는 것이 특징이다.