• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1621-1632
• /
• 1993

A numerical simulation is carried out on flows in a rotating serpentine flow passage, which models a cooling passage in a gas turbine blade, by using a 3-D FVM based TURBO-D program. When it is rotating, the flow field exhibits quite different aspects due to the effect of the Coriolis force. Especially the secondary flow field appearing in the cross-sectional area is very complex because of the combined effect of the Coriolis force and the centrifugal force in the curved area. Local Nusselt numbers are also obtained based on the Reynolds analogy and compared with the published experimental data showing a good agreement. The results of the present study can be applied to the design of cooling passages of a gas turbine blade.

• Journal of Wetlands Research
• /
• v.19 no.2
• /
• pp.240-245
• /
• 2017

In this study, we developed a method to assess quantitatively the amount and the economic value of water quality regulating service of ecosystem services. Numbers of species and aquatic organisms such as fish increased because of the improved water, but it was due to complex factors such as water quality regulation services of ecosystems, installation of environmental facilities for water quality treatment, and water quality regulation. Therefore we sought ways to quantitatively estimate the value of ecosystem regulation services. In this study, we propose a method to estimate the quantitative value of water quality regulation service of ecosystem by utilizing the total amount of water pollution. In addition, the economic value evaluation method was proposed by multiplying the estimated the quantitative value of water quality regulation service of ecosystem by the unit cost per unit capacity. Finally, the ecosystem water quality regulation service was estimated by using the evaluation method for BOD and T-P in Nakdong river watershed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2C
• /
• pp.191-199
• /
• 2006

In this paper, we propose a method to implement a predistorter of the $rho$-th order inverse filter structure to prevent signal distortion and spectral re-growth due to the high PAPR (peak-to-average ratio) of the OFDM signals and the non-linearity of high-power amplifiers. We model the memory-less non-linearity of the high-power amplifier with a polynomial model and utilize the inverse of the model, the $rho$-th order inverse filter, for the predistorter. Once the non-linearity is modeled with a polynomial, since we can determine the $rho$-th order inverse filter only with the coefficients of the polynomial, large memory is not required. To update the coefficients of the non-linear high-power amplifier model, we can use LMS or RLS algorithms. The convergence speed is high since the number of coefficients is small, and the computation is simple since manipulation of complex numbers is not necessary.

• Restorative Dentistry and Endodontics
• /
• v.45 no.1
• /
• pp.7.1-7.9
• /
• 2020

Objectives: This study was performed to assess the anatomy of mandibular first molars. Materials and Methods: In this in vivo study, cone-beam computed tomography (CBCT) volumes of 312 bilateral intact first mandibular molars from 156 patients (79 men and 77 women; average age, 35.6 ± 11.2 years) were investigated in terms of the direction of each canal's curvature in the buccolingual and mesiodistal dimensions (direction of the position of the apex in relation to the longitudinal axis of the root), the presence of an isthmus (a narrow, ribbon-shaped communication between 2 root canals) in 3 segments (0-2, 2-4, and 4-6 mm) from the apex), and the presence and number of accessory canals (smaller canals besides the main root canals, connecting the pulp to the periodontium). Data were analyzed statistically (α = 0.05). Results: Mesiolingual canals were mostly buccally and distally inclined, while mesiobuccal and distolingual canals were mostly distally curved. Isthmuses were more common in younger patients (χ² test, p < 0.05). The average numbers of accessory canals in the apical, middle, and coronal segments were 9.9 ± 4.2, 6.9 ± 2.9, and 9.3 ± 3.0 canals per segment, respectively (analysis of variance, p < 0.001). Age and sex were not associated with the number of accessory canals (p > 0.05). Conclusions: The complex anatomy of these teeth deserves attention during non-surgical or surgical endodontic treatment. Around the apex, isthmuses might be more prevalent in younger and female individuals.

• Journal of KIISE
• /
• v.42 no.4
• /
• pp.512-521
• /
• 2015

Internet users purchase goods on the Internet and express their positive or negative emotions of the goods in product reviews. Analysis of the product reviews become critical data to both potential consumers and to the decision making of enterprises. Therefore, the importance of opinion mining techniques which derive opinions by analyzing meaningful data from large numbers of Internet reviews. Existing studies were mostly based on comments written in English, yet analysis in Korean has not actively been done. Unlike English, Korean has characteristics of complex adjectives and suffixes. Existing studies did not consider the characteristics of the Internet language. This study proposes an emotional classification method which increases the accuracy of emotional classification by analyzing the characteristics of the Internet language connoting feelings. We can classify positive and negative comments about products automatically using the Internet emoticon. Also we can check the validity of the proposed algorithm through the result of high precision, recall and coverage for the evaluation of this method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.403-413
• /
• 2009

We compare three predistortion methods to prevent signal distortion and spectral re-growth due to the high PAPR (peak-to-average ratio) of OFDM signal and the non-linearity of high-power amplifiers. The three predistortion methods are pth order inverse, indirect learning architecture and look up table. The pth order inverse and indirect learning architecture methods requires less memory and has a fast convergence because these methods use a polynomial model that has a small number of coefficients. Nevertheless the convergence is fast due to the small number of coefficients and the simple computation that excludes manipulation of complex numbers by separate compensation for the magnitude and phase. The look up table method is easy to implement due to simple computation but has the disadvantage that large memory is required. Computer simulation result reveals that indirect learning architecture shows the best performance though the gain is less than 1 dB at $BER\;=\;10^{-4}$ for 64-QAM. The three predistorters are adaptive to the amplifier aging and environmental changes, and can be selected to the requirements for implementation.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.12
• /
• pp.2019-2029
• /
• 2016

Zinc finger proteins are among the most extensively applied metalloproteins in the field of biotechnology owing to their unique structural and functional aspects as transcriptional and translational regulators. The classical zinc fingers are the largest family of zinc proteins and they provide critical roles in physiological systems from prokaryotes to eukaryotes. Two cysteine and two histidine residues ($Cys_2His_2$) coordinate to the zinc ion for the structural functions to generate a ${\beta}{\beta}{\alpha}$ fold, and this secondary structure supports specific interactions with their binding partners, including DNA, RNA, lipids, proteins, and small molecules. In this account, the structural similarity and differences of well-known $Cys_2His_2$-type zinc fingers such as zinc interaction factor 268 (ZIF268), transcription factor IIIA (TFIIIA), GAGA, and Ros will be explained. These proteins perform their specific roles in species from archaea to eukaryotes and they show significant structural similarity; however, their aligned amino acids present low sequence homology. These zinc finger proteins have different numbers of domains for their structural roles to maintain biological progress through transcriptional regulations from exogenous stresses. The superimposed structures of these finger domains provide interesting details when these fingers are applied to specific gene binding and editing. The structural information in this study will aid in the selection of unique types of zinc finger applications in vivo and in vitro approaches, because biophysical backgrounds including complex structures and binding affinities aid in the protein design area.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.5
• /
• pp.18-24
• /
• 2003

The design cycle associated with large engineering systems requires an initial decomposition of the complex system into design processes which are coupled through the transference of output data. Some of these design processes may be grouped into iterative sybcycles. Previous researches predifined the numbers of design processes in groups, but these group sizes should be determined optimally to balance the computing time of each groups. This paper proposes adaptive decomposition method, which determines the group sizes and the order of processes simultaneously to raise design efficiency by expanding the chromosome of the genetic algorithm. Finally, two sample cases are presented to show the effects of optimizing the sequence of processes with the adaptive decomposition method.

• Journal of the Institute of Convergence Signal Processing
• /
• v.1 no.1
• /
• pp.64-73
• /
• 2000

The Korean character recognition technology for user interface in multimedia terminal requires fast processing time and high recognition rate. In this paper, we propose an phoneme and character recognition technology which uses characteristic information of korean and features of input strokes, i.e, feature point, feature vector, virtual vector, position relation between strokes. And, a recognition both phoneme and character by the various writing types of users uses korean database. The Korean database has been constructed by the characteristic information of korean and phoneme models which have various stroke information. Also, we use successive processing by the position relation between strokes and backtracking processing by the modification processing of stroke numbers which composed of each phoneme. This method reduces the complex processing of phoneme separation. The proposed on-line korean character recognition system has obtained 13msec average character processing time and correct recognition rate more than $95{\%}$ In a recognition experiment, where we tested 600 characters written by 10 people among 1,200 words.

• Journal of Elementary Mathematics Education in Korea
• /
• v.15 no.1
• /
• pp.121-139
• /
• 2011

This study conducted experimental problem posing activities using real-life materials. This study investigated the changes on students' mathematical thoughts and attitudes through the activities. This study is conducted via participation of students in a 5th grade class of N elementary school located in Daegu city. As a qualitative case study, this study focused on processes of problem posing rather than results. The problems applying new situations appear, and the used mathematical terms, units, and figures became more practical. The numbers of problems made are increased gradually, and more complex conditions are added as activities are performed. Most of the students revealed interests about problem making activities.