• Journal of the Korean Arthroscopy Society
• /
• v.13 no.3
• /
• pp.242-248
• /
• 2009

Purpose: To evaluate the clinical and radiologic results of the arthroscopic rotator cuff repair for partial articular surface tendon avulsion lesion. Materials and Methods: Twelve patients with symptomatic, partial articular surface tendon avulsion underwent arthroscopic rotator cuff repair between Mar. 2006 and Sep. 2008. The mean follow-up period was 18.3 months(12~36 months), and the mean age at the time of surgery was 46.9-year-old(19~64 years). Three cases had underwent rotator cuff repair after conversion to full-thickness tear and nine cases had transtendon repair with preserving bursal side cuff. Results: The mean VAS during motion was 6.2 before treatment and 2.0 at final follow-up (p<0.001). The passive forward flexion improved from $163.3^{\circ}$ preoperatively to $169.8^{\circ}$ postoperatively (p=0.038). The mean UCLA score improved from 18.4 preoperatively to 30.1 with 2 excellent, 8 good and 2 fair results at final follow-up. The mean KSS improved from 61.8 preoperatively to 76.8 at final follow-up. By examining the postoperative MR images of 5 patients, complete healing was observed in all of them. Conclusion: Arthroscopic rotator cuff repair may be an effective procedure for partial articular surface tendon avulsion in pain relief and improvement of the range of motion. If the remaining bursal side cuff fibers are intact, transtendon repair procedure with preserving the intact bursal layer of the tendon can be considered. If the remaining bursal side cuff fibers are friable or little, completion from partial-thickness to full-thickness tears with subsequent cuff repair can be considered.

• The Korean Journal of Emergency Medical Services
• /
• v.18 no.1
• /
• pp.83-94
• /
• 2014

Purpose : This study assessed the improvement of competency levels for participants, as well as their satisfaction from completion of the special international disaster response program. Methods : The program structure followed an intensive two-week course that included a combination of lectures, discussions, case studies, and field trips. "ICN Framework of Disaster Nursing Competencies" was used for designing the program. A pre-post survey was done to measure the change in the competencies of students and assess their satisfaction after finishing the program. Focus group interviews were also performed to further understand the attitudes of participants toward the disaster issues. Results : The overall pre-program test score for disaster competency was $2.18{\pm}0.68$ and the post-program test score was $6.30{\pm}0.84$, which showed statistically significant gains in all competency items (p <.001). The general satisfaction of participants with the program was quite high, demonstrated by a mean score of $4.5{\pm}0.51$. The benefits for students from program participation included increased knowledge and better understanding of the important roles of international organizations and NGOs. Conclusion : The international disaster education programs are necessary to provide an opportunity for students to increase their disaster competency. In addition, future development of a unified educational competency framework is also necessary.

• Korea journal of population studies
• /
• v.11 no.1
• /
• pp.204-229
• /
• 1988

This paper documents and discusses trends and differentials in youth's participation in the labor force and employment. Youth in this study is defined asthe young aged 15-29. Youth passes through a series of life-course transitions,which include school completion own family formation(marriage and childbirth) .mandatory service in the army (by males) , and their economic activities are affectedby those life-course events. Accordingly we show how and to what extent youth'slabor force participation and employment varies with age and how the age patternhas changed over time.Throughout the 1980's and 1990's, youth's labor force participation showeddifferent trends by age group Labor fDrce participation rate of the 15-19 agedsteeply decreased, while that of the 25-29 steadily increased during the twodecades, the rate fsr the 20-24 aged showing not much variation. The former is dueto the increased rate of school enrollment among the age group, while the lattercould be attributed, in part, to the young women s increased and more steadyparticipation in the labor force over time.While labor force participation could be considered as a result of one's choicesand preferences, employment opportunities are more or less restricted by labormarket structure and institutions . This study documents how the structuralconstraints have interacted with individual and group attributes to differentiateemployment opportunities between individuals (educational background) and groups(especially sex diffrences) . One of the most salient feature of youth's em[ploymentstructure is the recent high unemployment rate of the college graduates. We discusshow that is related to the'credential society'in which one's educational credentials and it's social status play major role in determining who gets what in terms of job opportunities. Also is discussed the discordance between school and labor marketsupply and demand system, which is apparent in the prolonged oversupply of thecollege graduates, which is due to the consistently high rate of college entranceobserved since the early 1980's. Theoretically the job market for college graduates isviewed not as the'neoclassical'wage competition market but as job competition market in which one's (good) job opportunity is determined by one s position in thejob queue, which is in turn heavily dependent on from which college one get shis/her college degree as well as one's sex.

• Korean Journal of Environment and Ecology
• /
• v.35 no.5
• /
• pp.525-547
• /
• 2021

The main purpose of this study is to examine the use of plant species in ecological restoration projects. To this end, planting drawings from 58 sites that had completed the return of the ecosystem conservation cooperation fund for the past six years were collected and analyzed. The analysis used the construction completion and design drawings to determine the overall selection status and analyze frequency by classifying planted plants into wild and cultivated plants by nature, size, vegetation climate, and upland and wetland habitat. The investigation and analysis process found many cases of wrong plant names, so an analysis was also performed on the matter. In the 58 investigation sites, 282 plants were used for planting: 91 tree species, 69 shrub species, 11 vine species, and 111 herbal species. The most commonly used plant species was Spiraea prunifolia f. simpliciflora, followed by Sorbus alnifolia, Quercus acutissima, Zoysia japonica, Callicarpa dichotoma, and Weigela subsessilisin that order. The most commonly used tree species was Sorbus alnifolia,followed by Quercus acutissima, Zelkova serrata, Chionanthus retusus, and Cornus officinalis, in that order. The most commonly used shrub species was Spiraea prunifolia f. simpliciflora, followed by Weigela subsessilis, Callicarpa dichotoma, Rhododendron yedoense f. poukhanense. and Euonymus alatusin that order. The most commonly used herbal plant species was Zoysia japonica, followed by Dendranthema zawadskii var. latilobum, Aster koraiensis, Miscanthus sacchariflorus, and Pennisetum alopecuroidesin that order. In the analysis by vegetation climate, Spiraea prunifolia f. simpliciflora, Callicarpa dichotoma, and Sorbus alnifoliawere most used in that order in both the temperate central and the warm temperate forest zones, but the pattern does not properly reflect the climate characteristics. In the analysis by habitat, Miscanthus sacchariflorus and Lythrum salicariawere most used in the wetland. In particular, the ratio of wild plants to cultivated plants was 76% to 24%, indicating the ratio of selecting cultivated plants was high. The names of plants on the drawings were mostly common names that did not appear in the Korea National Arboretum or the National Species List of Korea. It is necessary to use proper plant names in the future. Regarding the use of planting plants for ecological restoration, it is necessary to adopt the approach of diversifying selected plants, selecting plants according to characteristics of climate zones, and lowering the specifications of plants used for ecological restoration. Moreover, it is important to fully understand the ecological characteristics of wetland plants and minimize the ratio of using cultivated plants to ensure the plant selection centered on wild plants.

• Korean Journal of Food Science and Technology
• /
• v.53 no.5
• /
• pp.640-647
• /
• 2021

In this study, we analyzed three rice pre-treatment methods for the preparation of mit-sool (first mashing), with godubap (steamed rice), beombeok (undercooked porridge), and juk (porridge). The results can provide basic data for the development of takju with improved quality. In terms of the base alcohol, godubap produced the highest amount of alcohol (8.1%) after two days, followed by beombeok and juk. After two days of fermentation, soluble solids were measured at 15.3, 15.1, and 1.4°Brix in beombeok, juk, and godubap, respectively, The glucose content of godubap did not change significantly; however, the maltose content increased. In beombeok, maltose decreased from 16.48 mg/mL on the initial day 0 to 1.27 mg/mL on day 9. In juk, glucose and maltose increased from 14.05 and 11.49 mg/mL on day 0 to 31.39 and 42.53 mg/mL on day 2, respectively. Succinic acid levels increased in the godubap and beombeok mit-sool. However, succinic acid was not detected in godubap and juk during the initial stage of fermentation, and lactic acid was not detected in beombeok mit-sool. During the fermentation stage of deot-sool (second mashing), the highest alcohol content of takju made with godubap alcohol was 18.0% and the lowest alcohol content was 15.1% in beombeok on day 9. The total acidity was as high as 0.54% for beombeok, 0.41% for juk, and 0.39% for godubap. In the flavor analysis, ethyl caprate and ethyl caprylate, which were high on day 0 in godubap, decreased upon the completion of fermentation on day 9. Banana-flavored isoamyl alcohol content increased. For juk, ethyl caprate and ethyl caprylate, which were high on day 0, decreased on day 9. Flavor components, such as ethyl palmitate and ethyl linoleate were increased.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.10
• /
• pp.21-29
• /
• 2021

Most concrete gravity-type dams in and out of the country were constructed by column method to control cracks caused by concrete hydration heat generated during construction, resulting in a certain level of leakage after impoundment through various causes, such as contraction joints and construction joints. However, due to the characteristics of concrete structures that shrink and expand according to temperature, concrete dams have vertical joints and drains to allow penetration. PVC waterproof shows excellent effects in completion of the dam, which however increases the possibility of interfacial failure due to different thermal expansion. Other causes of penetration may include problems with quality control during installation, generation of cracks due to heat of hydration of concrete, waterproofing methods, etc. In the case of Bohyunsan Dam in Yeongcheon, North Gyeongsang Province, the amount of drainage in the gallery was checked and underwater, and it was confirmed that there are many penetrations from drainage holes connected to vertical joints, and that some of the PVC waterproofs are not fully operated. As a new method to prevent penetration through vertical joints, D.S.I.M. (Dam Sealing Innovation Method) developed by World E&C was applied to Bohyunsan Dam and checked the amount of drainage in the gallery. As a result of first testing three most leaking vertical joints, the drain in the gallery was reduced by 87% on the average and then applied to the remaining 13 locations, which showed a 83% reduction effect based on the total drain in the gallery. Summing up these results, it was found that D.S.I.M. preventing water leakage from the upstream face is a valid construction method to reduce the water see-through and penetration quantity seen in downstream faces of concrete dams. If D.S.I.M. is applied to other concrete dams at domestic and abroad, it is expected that it will be very effective to prevent water leakage through vertical joints that are visible from downstream faces.

• Korea Real Estate Review
• /
• v.28 no.1
• /
• pp.79-90
• /
• 2018

The purpose of this study was to estimate the pricing factors of residential lands in new cities by estimating the pricing model of residential lands. For this purpose, hedonic equations for each quantile of the conditional distribution of land prices were estimated using quantile regression methods and the sale price date of Jangyu New Town in Gimhae. In this study, a quantile regression method that models the relation between a set of explanatory variables and each quantile of land price was adopted. As a result, the differences in the effects of the characteristics by price quantile were confirmed. The number of years that elapsed after the completion of land construction is the quadratic effect in the model because its impact may give rise to a non-linear price pattern. Age appears to decrease the price until certain years after the construction, and increases the price afterward. In the estimation of the quantile regression, land age appears to have a statistically significant impact on land price at the traditional level, and the turning point appears to be shorter for the low quantiles than for the higher quantiles. The positive effects of the use of land for commercial and residential purposes were found to be the biggest. Land demand is preferred if there are more than two roads on the ground. In this case, the amount of sunshine will improve. It appears that the shape of a square wave is preferred to a free-looking land. This is because the square land is favorable for development. The variables of the land used for commercial and residential purposes have a greater impact on low-priced residential lands. This is because such lands tend to be mostly used for rental housing and have different characteristics from residential houses. Residential land prices have different characteristics depending on the price level, and it is necessary to consider this in the evaluation of the collateral value and the drafting of real estate policy.

• Journal of Intelligence and Information Systems
• /
• v.25 no.2
• /
• pp.99-122
• /
• 2019

According to the recent IDC (International Data Corporation) report, as from 2025, the total volume of data is estimated to reach ten times higher than that of 2016, corresponding to 163 zettabytes. then the main body of generating information is moving more toward corporations than consumers. So-called "the wave of Big-data" is arriving, and the following aftermath affects entire industries and firms, respectively and collectively. Therefore, effective management of vast amounts of data is more important than ever in terms of the firm. However, there have been no previous studies that measure the effects of big data investment, even though there are number of previous studies that quantitatively the effects of IT investment. Therefore, we quantitatively analyze the Big-data investment effects, which assists firm's investment decision making. This study applied the Event Study Methodology, which is based on the efficient market hypothesis as the theoretical basis, to measure the effect of the big data investment of firms on the response of market investors. In addition, five sub-variables were set to analyze this effect in more depth: the contents are firm size classification, industry classification (finance and ICT), investment completion classification, and vendor existence classification. To measure the impact of Big data investment announcements, Data from 91 announcements from 2010 to 2017 were used as data, and the effect of investment was more empirically observed by observing changes in corporate value immediately after the disclosure. This study collected data on Big Data Investment related to Naver 's' News' category, the largest portal site in Korea. In addition, when selecting the target companies, we extracted the disclosures of listed companies in the KOSPI and KOSDAQ market. During the collection process, the search keywords were searched through the keywords 'Big data construction', 'Big data introduction', 'Big data investment', 'Big data order', and 'Big data development'. The results of the empirically proved analysis are as follows. First, we found that the market value of 91 publicly listed firms, who announced Big-data investment, increased by 0.92%. In particular, we can see that the market value of finance firms, non-ICT firms, small-cap firms are significantly increased. This result can be interpreted as the market investors perceive positively the big data investment of the enterprise, allowing market investors to better understand the company's big data investment. Second, statistical demonstration that the market value of financial firms and non - ICT firms increases after Big data investment announcement is proved statistically. Third, this study measured the effect of big data investment by dividing by company size and classified it into the top 30% and the bottom 30% of company size standard (market capitalization) without measuring the median value. To maximize the difference. The analysis showed that the investment effect of small sample companies was greater, and the difference between the two groups was also clear. Fourth, one of the most significant features of this study is that the Big Data Investment announcements are classified and structured according to vendor status. We have shown that the investment effect of a group with vendor involvement (with or without a vendor) is very large, indicating that market investors are very positive about the involvement of big data specialist vendors. Lastly but not least, it is also interesting that market investors are evaluating investment more positively at the time of the Big data Investment announcement, which is scheduled to be built rather than completed. Applying this to the industry, it would be effective for a company to make a disclosure when it decided to invest in big data in terms of increasing the market value. Our study has an academic implication, as prior research looked for the impact of Big-data investment has been nonexistent. This study also has a practical implication in that it can be a practical reference material for business decision makers considering big data investment.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1125-1146
• /
• 2018

Segment lining applied to the TBM tunnel is mainly made of concrete, and it requires sufficient structural capacity to resist loads received during the construction and also after the completion. When segment lining is design to the Limit State Design, both Ultimate Limit State (ULS) and Service Limit State (SLS) should be met for the possible load cases that covers both permanent and temporary load cases - such as load applied by TBM. When design segment lining, it is important to check structural capacity at the joints as both temporary and permanent loads are always transferred through the segment joints, and sometimes the load applied to the joint is high enough to damage the segment - so called bursting failure. According to the various design guides from UK (PAS 8810, 2016), compression stress at the joint surface can generate bursting failure of the segment. This is normally from the TBM's jacking force applied at the circumferential joint, and the lining's hoop thrust generated from the permanent loads applied at the radial joint. Therefore, precast concrete segment lining's joints shall be designed to have sufficient structural capacity to resist bursting stresses generated by the TBM's jacking force and by the hoop thrust. In this study, bursting stress at the segment joints are calculated, and the joint's structural capacity was assessed using Leonhardt (1964) and FEM analysis for three different design cases. For those three analysis cases, hoop thrust at the radial joint was calculated with the application of the most widely used limit state design codes Eurocode and AASHTO LRFD (2017). For the circumferential joints bursting design, an assumed TBM jack force was used with considering of the construction tolerance of the segments and the eccentricity of the jack's position. The analysis results show reinforcement is needed as joint bursting stresses exceeds the allowable tensile strength of concrete. This highlights that joint bursting check shall be considered as a mandatory design item in the limit state design of the segment lining.

• Korean journal of applied entomology
• /
• v.57 no.4
• /
• pp.261-269
• /
• 2018

The cowpea aphid Aphis craccivora Koch (Hemiptera: Aphididae) is a polyphagous species with a worldwide distribution. We investigated the temperature effects on development periods of nymphs, and the longevity and fecundity of apterous female of A. craccivora. The study was conducted at six constant temperatures of 10.0, 15.0, 20.0, 25, 30.0, and $32.5^{\circ}C$. A. craccivora developed successfully from nymph to adult stage at all temperatures subjected. The developmental rate of A. craccivora increased as temperature increased. The lower developmental threshold (LT) and thermal constant (K) of A. craccivora nymph stage were estimated by linear regression as $5.3^{\circ}C$ and 128.4 degree-days (DD), respectively. Lower and higher threshold temperatures (TL, TH and TH-TL, respectively) were calculated by the Sharpe_Schoolfield_Ikemoto (SSI) model as $17.0^{\circ}C$, $34.6^{\circ}C$ and $17.5^{\circ}C$. Developmental completion of nymph stages was described using a three-parameter Weibull function. Life table parameters were estimated. The intrinsic rate of increase was highest at $25^{\circ}C$, while the net reproductive rate was highest at $20^{\circ}C$. Biological characteristics of A. craccivora populations from different geographic areas were discussed.