• 유통과학연구
• /
• 제15권2호
• /
• pp.21-26
• /
• 2017

Purpose - Sharing economy is a promising research topic as a complementary approach for solving difficult issues resulting from market economy. Motive factors for consumer participation in sharing economy are necessary to facilitate the growth of sharing economy. This study analyzes motives for participating in sharing economy using samples from a car sharing service in South Korea. Research design, data, and methodology - Four hypotheses drawn from a new research model integrating the relationships between economic and social value, social value, and the intention to use sharing economy services were proposed. 292 valid samples were collected from Socar users in South Korea. Multiple regression analysis was employed to test the hypotheses. Results - An empirical study identified the importance of convenience and time savings as determinants of intention to use continuously a car sharing service. Cost savings and social value did not significantly influence the intention to use car sharing service. Conclusions - The present study implies that managers working in sharing economy don't have to miss a role of convenience. Although a new finding implies that convenience is an important factor influencing car sharing service, the present study has a limitation of generality that samples are mostly collected from the age range of 20 to 30 years.

• Structural Engineering and Mechanics
• /
• 제58권2호
• /
• pp.327-345
• /
• 2016

Many experimental and analytical studies have been conducted with beam-column subassemblages composed of a two-span beam to investigate the progressive collapse resistance of RC frames. Most study results reveal a strength-decreased transition phase in the nonlinear static load-deflection curve, which may induce dynamic snap-through response and increase the chord rotation demand for effective catenary action (ECA). In this study, the nonlinear static response is idealized as a piecewise linear curve and analytical pseudo-static response is derived for each linearized region to investigate the rotation demands for the ECA of the two-span RC beams. With analytical parameters determined from several published test results, numerical analysis results indicate that the rotation demand of 0.20 rad recommended in the design guidelines does not always guarantee the ECA. A higher rotation demand may be induced for the two-span beams designed with smaller span-to-depth ratios and it is better to use their peak arch resistance (PAR) as the collapse strength. A tensile reinforcement ratio not greater than 1.0% and a span-to-depth ratio not less than 7.0 are suggested for the two-span RC beams bridging the removed column if the ECA is expected for the collapse resistance. Also, complementary pseudo-static analysis is advised to verify the ECA under realistic dynamic column loss even though the static PAR is recovered in the nonlinear static response. A practical empirical formula is provided to estimate an approximate rotation demand for the ECA.

• Earthquakes and Structures
• /
• 제3권1호
• /
• pp.17-35
• /
• 2012

Simplified equations for fundamental period of vibration of skeletal structures provided by most seismic design provisions suffer from the absence of any associated confidence levels and of any reference to their empirical basis. Therefore, such equations may typically give a sector of designers the false impression of yielding a fairly accurate value of the period of vibration. This paper, although not addressing simplified codes equations, introduces a set of mathematical equations utilizing the theory of error propagation and First-Order Second-Moment (FOSM) techniques to determine bounds on the relative error in theoretically calculated fundamental period of vibration of skeletal structures. In a complementary step, and for verification purposes, Monte Carlo simulation technique has been also applied. The latter, despite involving larger computational effort, is expected to provide more precise estimates than FOSM methods. Studies of parametric uncertainties applied to reinforced concrete frame bents - potentially idealized as SDOF systems - are conducted demonstrating the effect of randomness and uncertainty of various relevant properties, shaping both mass and stiffness, on the variance (i.e. relative error) in the estimated period of vibration. Correlation between mass and stiffness parameters - regarded as random variables - is also thoroughly discussed. According to achieved results, a relative error in the period of vibration in the order of 19% for new designs/constructions and of about 25% for existing structures for assessment purposes - and even climbing up to about 36% in some special applications and/or circumstances - is acknowledged when adopting estimates gathered from the literature for relative errors in the relevant random input variables.

• 유통과학연구
• /
• 제12권11호
• /
• pp.35-43
• /
• 2014

Purpose - This study evaluates the mutual influential power regarding the trade volumes of Japan and USA, based on a literature review and an empirical analysis. Through the literature review, I could evaluate each country's actual import-export volume and its status. Further, I could evaluate how each country could influence its trade outcome, through empirical analysis. Research design, data, and methodology - This study aims to review the trade structure to improve Japan-USA economic and social cooperation, as the two countries have reciprocal complementary features, and to examine trade weaknesses and analyze factors influencing trade and its direction, as well as to identify ways to expand trade. Results - The intra-economic potential cooperation fields are numerous. Additionally, anticipated profits from these fields are stable as compared to other fields in the regional economic integration. Conclusion - The interrelations between the two economic identities can provide optimal opportunities for industrial technology cooperation. Under the current aggravated competition in industrial fields, it is advisable to identify ways to secure stable resource suppliers, including the development of export markets.

• Asian Journal of Business Environment
• /
• 제10권1호
• /
• pp.45-50
• /
• 2020

Purpose: This paper examines the theoretical grounds for the disclosure of the Korea Fair Trade Commission. Three central measures of the disclosure are scrutinized: The interconnected status of affiliate companies, the important matters of private affiliates, and the large internal transactions. Contemplating on three measures, respectively, we review the rationale and derive policy implications. Research design, data, and methodology: Collecting the data of violation rates and remedial measures, we analyze the intensity of the disclosure enforcement. These statistics are critically reviewed by the economic literature of mandatory disclosure. Results: Statistics evince that the Korea Fair Trade Commission has enforced the regulatory disclosure quite successfully. Violation rates of the disclosure has declined from the outset. It demonstrates that the Korea Fair Trade Commission has enforced those measures satisfactorily for about a decade. But we cannot ascertain empirically whether the regulatory disclosures are socially and economically beneficial. To evaluate the effect of the regulatory disclosures precisely, we need a further empirical investigation. Conclusions: Despite the lack of policy evaluation, this study suggests complementary measures for current disclosures. First, disclosure of executive compensation in privately held subsidiaries must be introduced. Second, the controlling shareholder/manager should be responsible for information disclosure on foreign subsidiaries.

• 성인간호학회지
• /
• 제22권3호
• /
• pp.312-321
• /
• 2010

Purpose: The purpose of this study was to investigate the effects of balance taping on pain and Range of Motion (ROM). ROM of the knee joint in the elderly with lower limbs arthritis. Methods: This study was a nonequivalent pretest-posttest design, quasi-experimental study. An experimental group of 35 elderly and a control group of 35 elderly were assigned. Subjects responses to the Visual analogue Scale (VAS) and range of motion scores as measured by a joint goniometer. Data were analyzed by, t-test and repeated measures ANOVA. Results: In the experimental treatment group, the pain score was significantly decreased from 6.46 to 2.09 after balance taping (p<.001). In addition, knee joint ROM of the experimental group was significantly increased from 114.80 to 121.92 after balance taping (p=.003, p<.001, p<.001). Conclusion: This is a very important study as it is an excellent treatment that nurses can utilize and these data support the efficacy of the method.

• Journal of Communications and Networks
• /
• 제12권2호
• /
• pp.158-167
• /
• 2010

The energy efficiency of wireless infrastructure and terminals has been drawing renewed attention of late, due to their significant environmental cost. Emerging green communication paradigms such as cognitive radios, are also imposing the additional requirement of flexibility. This dual requirement of energy efficiency and flexibility poses new design challenges for implementing radio functional blocks. This paper focuses on the area vs. power trade-offs for the type of channel filters that are required in the digital frontend of a flexible, energy-efficient radio. In traditional CMOS circuits, increased area was traded for reduced dynamic power consumption. With leakage power emerging as the dominant mode of power consumption in nanoscale CMOS, these trade-offs must be revisited due to the strong correlation between area and leakage power. The current work discusses how the increased timing slacks obtained by increasing the parallelism can be exploited for overall power reduction even in nanoscale circuits. In this context the paper introduces the notion of 'area efficiency' and a metric for evaluating it. The proposed metric has also been used to compare the area efficiencies of different classes of time-shared filters.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1254-1257
• /
• 2004

This paper presents a built-in current sensor(BICS) that can detect defects in CMOS integrated circuits through current testing technique - Iddq test. Current test has recently been known to a complementary testing method because traditional voltage test cannot cover all kinds of bridging defects. So BICS is widely used for current testing. but there are some critical issues - a performance degradation, low speed test, area overhead, etc. The proposed BICS has a two operating mode- normal mode and test mode. Those methods minimize the performance degradation in normal mode. We also used a current-mode differential amplifier that has a input as a current, so we can realize higher speed current testing. Furthermore, only using 10 MOSFETS and 3 inverters, area overhead can be reduced by 6.9%. The circuit is verified by HSPICE simulation with 0.25 urn CMOS process parameter.

• 동서간호학연구지
• /
• 제14권2호
• /
• pp.67-73
• /
• 2008

Purpose: The purpose of this study was to examine the effect of Kynesio-taping therapy (KTT) on chronic joint pain among community-dwelling older adults. Methods: A pre-experimental design was used. KTT was employed on 23 consenting community older adults visiting a community center. KTT was applied on the painful joint for 3-4 days. Pain was evaluated using the visual analogue scale. Results: Frequent locations of pain were waist (43.8%), knee (28.1%), shoulder (12.4%), and head (9.4%). Time of severe pain during the day was mid-day (47.8%), early morning (21.7%), and evening (13.0%). Pain relief management included hospital visitation (65.2%), medication (17.4%), and application of a poultice (13.0%). Pain scores were significantly decreased after KTT compared to pretest scores acquired prior to taping (p<.001). Conclusions: KTT is a cost-effective, easy-to-use, and effective form of pain relief in older adults with chronic joint pain. Clinical practitioners can consider KTT as a complementary method of chronic pain control in older adults.

• 한국정밀공학회지
• /
• 제26권11호
• /
• pp.138-145
• /
• 2009

A suspended membrane micro fluidic heat flux sensor that is able to measure the heat flow rate was designed and fabricated by a complementary-metal-oxide-semiconductor-compatible process. The combination of a thirty-junction gold and nickel thermoelectric sensor with an ultralow noise preamplifier, low pass filter, and lock-in amp has enabled the resolution of 50 nW power and provides the sensitivity of $11.4\;mV/{\mu}W$. The heater modulation method was used to eliminate low frequency noises from sensor output. It is measured with various heat flux fluid of DI-water to test as micro fluidic application. In order to estimate the heat generation of samples from the output measurement of a micro fluidic heat-flux sensor, a methodology for modeling and simulating electro-thermal behavior in the micro fluidic heat-flux sensor with integrated electronic circuit is presented and validated. The electro-thermal model was constructed by using system dynamics, particularly the bond graph. The electro-thermal system model in which the thermal and the electrical domain are coupled expresses the heat generation of samples converts thermal input to electrical output. The proposed electro-thermal system model shows good agreement with measured output voltage response in transient state and steady-state.