• Title/Summary/Keyword: Complementary area

Search Result 270, Processing Time 0.035 seconds

Study on Grain Boundaries in Single-layer Graphene Using Ultrahigh Resolution TEM

  • Lee, Zong-Hoon
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.08a
    • /
    • pp.107-107
    • /
    • 2012
  • Recently, large-area synthesis of high-quality but polycrystalline graphene has been advanced as a scalable route to applications including electronic devices. The presence of grain boundaries (GBs) may be detrimental on some electronic, thermal, and mechanical properties of graphene, including reduced electronic mobility, lower thermal conductivity, and reduced ultimate mechanical strength, yet on the other hand, GBs might be beneficially exploited via controlled GB engineering. The study of graphene grains and their boundary is therefore critical for a complete understanding of this interesting material and for enabling diverse applications. I present that scanning electron diffraction in STEM mode makes possible fast and direct identification of GBs. We also demonstrate that dark field TEM imaging techniques allow facile GB imaging for high-angle tilt GBs in graphene. GB mapping is systematically carried out on large-area graphene samples via these complementary techniques. The study of the detailed atomic structure at a GB in suspended graphene uses aberration-corrected atomic resolution TEM at a low kV.

  • PDF

AKARI INFRARED CAMERA SURVEY OF THE LARGE MAGELLANIC CLOUD

  • Shimonishi, T.;Kato, D.;Ita, Y.;Onaka, T.;AKARI/IRC LMC team
    • Publications of The Korean Astronomical Society
    • /
    • v.32 no.1
    • /
    • pp.83-85
    • /
    • 2017
  • We conducted an unbiased near- to mid-infrared imaging and spectroscopic survey of the Large Magellanic Cloud (LMC) as a part of the AKARI Mission Program "Large-area Survey of the LMC" (LSLMC, PI: T. Onaka). An area of about 10 square degrees of the LMC was observed by five photometric bands (3.2, 7, 11, 15, and $24{\mu}m$) and a low-resolution slitless prism ($2-5{\mu}m$, R ~20) equipped with AKARI /IRC. We constructed and publicly released photometric and spectroscopic catalogues of point sources in the LMC based on the survey data. The catalogues provide a large number of near-infrared spectral data, coupled with complementary broadband photometric data. Combined use of the present AKARI LSLMC catalogues with other infrared point source catalogues of the LMC possesses scientific potential that can be applied to various astronomical studies.

New Transistor Sizing Algorithms For CMOS Digital Designs (CMOS 디지틀 설계를 위한 트랜지스터 크기의 최적화기법)

  • 이상헌;김경호;박송배
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.31A no.3
    • /
    • pp.68-76
    • /
    • 1994
  • In the automatic transistor sizing with computer for optimizing delay and the chip area of CMOS digital circuits, conventionally either a mathematical method or a heuristic method has been used. In this paper, we present a new method of transistor sizing, a sort of combination of the above two methods, in which the mathematical method is used for sizing of critical paths and the heuristic method is used for desizing of non-critical paths. In order to reduce the overall problem dimension, a basic block called an extended stage is introduced which includes a basic stage, parallel transistors and complementary part. Optimization for multiple critical paths is formulated as a problem of area minimization subject to delay constraints and is solved by the augmented Lagrange multiplier method. The transistor sizes along non-critical paths are decreased successively without affecting the critical path delay times. The proposed scheme was successfully applied to several test circuits.

  • PDF

Single-bit digital comparator circuit design using quantum-dot cellular automata nanotechnology

  • Vijay Kumar Sharma
    • ETRI Journal
    • /
    • v.45 no.3
    • /
    • pp.534-542
    • /
    • 2023
  • The large amount of secondary effects in complementary metal-oxide-semiconductor technology limits its application in the ultra-nanoscale region. Circuit designers explore a new technology for the ultra-nanoscale region, which is the quantum-dot cellular automata (QCA). Low-energy dissipation, high speed, and area efficiency are the key features of the QCA technology. This research proposes a novel, low-complexity, QCA-based one-bit digital comparator circuit for the ultra-nanoscale region. The performance of the proposed comparator circuit is presented in detail in this paper and compared with that of existing designs. The proposed QCA structure for the comparator circuit only consists of 19 QCA cells with two clock phases. QCA Designer-E and QCA Pro tools are applied to estimate the total energy dissipation. The proposed comparator saves 24.00% QCA cells, 25.00% cell area, 37.50% layout cost, and 78.11% energy dissipation compared with the best reported similar design.

Determinants of the Location and Relocation of Domestic Logistics Firms in Korea (focused on complementary commodity flow survey for 2006) (우리나라 국내 화주기업의 입지 및 재입지 선택 특성 분석 (2006년 물류현황보완조사를 중심으로))

  • Do, Hwa-Yong;Jang, Hoon;Kim, Chan-Sung;Won, Jai-Mu
    • Journal of Korean Society of Transportation
    • /
    • v.26 no.1
    • /
    • pp.37-49
    • /
    • 2008
  • In general, most of the firms do not settle down in one place for their pursuit of profit. There are many reasons for the relocation of the firms; procurement of raw material, market area, transportation cost and housing cost. The aspect of national policy, firm relocation has been systemically promoted for the purpose of logistics system efficiency. Nowadays balanced regional development has been issue. Another aspect, many countries have struggled for the preoccupancy of new place because of its production cost saving and curtailment of expenditure. The aim of this article is qualitative and quantitative analysis of relocation influence factors of domestic goods firms in Korea. This article dynamically analyzed the relocation influence factors for domestic goods firms in Korea. For the analysis this article made use of complementary survey (2006) out of the 3rd national logistics survey (2005). The complementary survey conducted pre-business district, business period, relocation reason, etc. This article dynamically analyzed from the three aspects; observation of average residence time in one business district, relocation factors, influence of market area. Analysis shows that relocation of firm is very high rate and the reasons of relocation play compositeness role. The results of determinants of location, firms approach the established market area closely and the firm's relocation is influenced by market area.

A study on installation location of radar for minimizing blind area in the construction of VTS system of Kangjeong Port (강정항 VTS 시스템 구축시 음영구역 최소화를 위한 레이더의 위치설정에 관한 연구)

  • LEE, Seung-Hi;KIM, Kwang-Il;AHN, Jang-young;LEE, Chang-Heon;CHOI, Chan-Moon
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.53 no.2
    • /
    • pp.187-195
    • /
    • 2017
  • We have studied the efficient operation of the radar and the appropriateness of the installation location, when constructing the VTS system. As the Civil-Military Complex Harbour (Kangjeong Port) is completed in 2016, we set the control area within 10 nautical miles centering on Kangjeong Port, and found out and removed the operational radar blind area of VTS system to provide safe navigation information for vessels that navigating this area. Assuming that two international cruise ships entering at the same time, we performed the radar simulation and compared the images by considering the three sites of Kangjeong Port, Miaksan and Seoguipo Port. Simulation results for a single radar installed at Kangjung Port indicate that the blind area was largely affected by two large cruise ships and the surrounding islands. The blind area due to Kogunsan was considerably large when installed in Miaksan, but the blind area due to the influences of Beomseom, Moonseom and Seopseom was negligibly large. It seems that additional radar installation is necessary as a complementary solution to solve this blind area. When two radars were installed at Miaksan and Kangjeong Port, the residual blind area due to the Seopseom was $0.25km^2$ at 0.1~0.33 nautical miles in the southeast direction from Seopseom. In addition, the remaining blind area with two cruise ships mutually influenced was $0.18km^2$, which did not occur with a single cruise ship.

Assessment of Complementary Relationship Evapotranspiration Models for the Bokahcheon Upper-middle Watershed (보완관계법에 의한 증발산량 산정 모형의 평가 - 복하천 중상류 유역을 중심으로 -)

  • Kim, Nam Won;Lee, Jeongwoo
    • Journal of Korea Water Resources Association
    • /
    • v.47 no.6
    • /
    • pp.547-559
    • /
    • 2014
  • The objective of this study is to evaluate the performance of the complementary relationship-based evapotranspiration models, namely, advection-aridity (AA) model of Brutsaert and Stricker and the CRAE model of Morton for estimating actual evapotranspiration. Both models were applied to the Bokhacheon middle-upper watershed, and their estimates were evaluated against the water balance estimate. The calculation was made on a daily basis and comparison was made on monthly and annual bases. For comparison, the water balance estimates were not obtained from the observed precipitation and streamflow data but were based on the simulated data by using integrated watershed model, SWAT-K which is the revised version of SWAT. The reason not to directly use the observed data for water balance estimate is that the credible record period is not sufficient and the streamflow has been altered due to water use and release. Overall, the results showed that both AA model and CRAE model with their original parameters overestimate annual and monthly evapotranspiration, and the large difference between the complementary relationship-based approach and the water balance approach occurs especially for the dry season from Nov. to Mar. It was found out that the parameters, particularly for the advection related parameter, must be recalibrated to accurately produce monthly and annual regional evapotranspiration for this study area.

A Study on the Adaptation Method of Biotope Area Factor by Land-use Type in the Built-up Area (시가화지역 토지이용유형별 피복현황 분석을 통한 생태면적률 적용 방안 연구)

  • Lee, Kyong-Jae;Hong, Suk-Hwan;Choi, In-Tae;Han, Bong-Ho
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.35 no.4
    • /
    • pp.40-47
    • /
    • 2007
  • The objective of this study is to analyze the propriety of the Biotope Area Factor's(BAF) application and propose an improvement plan. The BAP system, initially started by Seoul metropolitan city, is being settled in Korea. The BAF originated from the Biotop $Fl{\ddot{a}}chen$ Faktor(BFF) system of Berlin Germany. It was established as part of the Landscape Plan for the ecological function recovery in the high density built-up area with a sense of environmentally friendly urban management. The study compared the BAF's present condition of Ganddong-Gu, Seoul with Seoul's BAF system. Some problems appeared from the system application. Firstly, it may cause ecological damage if the site ranges are more than current BAF system limits. Secondly, the application of the current BAF system has the possibility of general redevelopment, but the partial improvement considering current standards of the high density built-up area's paving section is impossible. Lastly, division of the application object and application type are not divided well. In addition, the Seoul BAF which is currently applied across the board is based on the destruction of the natural area and low density built-up area. Accordingly, to improve these problems requires a complementary system protecting the ecological function prior to the application of the BAF and with restricted application to high density of BAF system built-up area.

Analysis of runoff aggregation structure and energy expenditure pattern for Choyang creek basin on the basis of power law distribution (멱함수 법칙분포를 기반으로 한 조양하 유역의 유출응집구조와 에너지소비 양상에 대한 해석)

  • Kim, Joo-Cheol;Cui, Feng Xue;Jung, Kwan Sue
    • Journal of Korea Water Resources Association
    • /
    • v.50 no.11
    • /
    • pp.725-734
    • /
    • 2017
  • The main purpose of this study is to analyze runoff aggregation structure and energy expenditure pattern of Choyang creek basin within the framework of power law distribution. To this end geomorphologic factors of every point in the basin of interest, which define tractive force and stream power as well as drainage area, are extracted based on GIS, and their complementary cumulative distributions are graphically analyzed through fitting them to power law distribution. The results indicate that three distinct behavioral regimes are observed from the complementary cumulative distributions of three geomorphogic factors. Based on the parameter estimation of power law distribution by maximum likelihood drainage area and stream power can be judged as scale invariance factor without finite scale while tractive force as scale dependence factor with finite scale. Furthermore, it is judged that tractive force would not follow power law distribution because it shows limited complex system behaviors only within the small extent of scale. The exponent of power law distribution for drainage area obtained in this study by maximum likelihood is larger than the previous researches due to the difference of parameter estimation methodologies. And the exponent for stream power is smaller than the previous researches due to the scaling property of channel slope for the basin of interest.

Complementary measures for Environmental Performance Evaluation Index of External Space of Green Standard for Energy and Environmental Design for Apartment Complex - Focused on the Respect of Response to Climate Change - (공동주택 녹색건축인증기준의 외부공간 환경성능 평가지표 보완방안 - 기후변화 대응 측면을 중심으로 -)

  • Ye, Tae-Gon;Kim, Kwang-Hyun;Kwon, Young-Sang
    • Journal of the Architectural Institute of Korea Planning & Design
    • /
    • v.34 no.1
    • /
    • pp.3-14
    • /
    • 2018
  • An apartment complex is a building use with great potential to contribute to solving problems related to urban ecological environment and climate change. The first goal of this study is to grasp the current situation of application and limitations of the ecological area rate, which is a representative evaluation index used to evaluate the environmental performance of the external space of an apartment complex in Green Standard for Energy and Environmental Design (G-SEED). The second goal is to propose a prototype of the evaluation index for evaluating greenhouse gas (GHG) reduction performance in order to supplement the evaluation index for the environmental performance of the external space in terms of response to climate change. We analyzed 43 cases of apartment complexes certified according to G-SEED, which was enforced since July 1, 2010, and found application characteristics of each space type and the limitations of ecological area rate. We analyzed overseas green building certification systems such as LEED and BREEAM that derived implications for supplementing the limitations of ecological area rate, which is focused on the evaluation of soil and water circulation function, and set up a development direction of complementary measures. Through analysis of previous studies, relevant regulations and standards, and technical documents of the manufacturer, the heat island mitigation performance of the pavement and roof surfaces of the apartment complex and the carbon uptake performance of the trees in the apartment complex was selected as parameters to yield the GHG reduction performance of the external space of the apartment complex. Finally, a quantitative evaluation method for each parameter and a prototype of the evaluation index for the GHG reduction performance were proposed. As a result of applying the prototype to an apartment complex case, the possibility of adoption and applicability as an evaluation index of G-SEED were proved.