• The KSFM Journal of Fluid Machinery
• /
• v.15 no.6
• /
• pp.39-45
• /
• 2012

This paper describes the outcome of the design of a 200 kW class micro gas turbine and the sensitivity of its performance (efficiency and power) to the variations in major design parameters. The reference design parameters were set up based on the best available component technologies. The resulting net electricity generation efficiency of the micro gas turbine package was found to be competitive to those of other systems in the market. The sensitivities of power and efficiency to the variations in compressor and turbine efficiencies, pressure ratio, turbine inlet temperature, recuperator effectiveness, secondary air ratio, pressure loss ratios of both the cold and hot sides of the recuperator were estimated. Based on the sensitivity data, a simplified method to predict the variation in system performance responding to the combinations of small changes in all design parameters were set up and validated.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.2
• /
• pp.126-137
• /
• 2003

The feasibility study of UV-disinfection system was performed for disinfection of effluent from wastewater treatment plant. Three low-pressure UV lamps of 17, 25, and 41 W were examined with various flow rates. Low-pressure UV lamps of 17W were examined with various turbidity, DOM (dissolved organic matter), and SS (suspended solid). The pilot plant was a flow-through type UV-disinfection system, and the range of exposure time varied from 5 to 40 seconds, turbidity from 0 to 40 NTU, DOM from 0 to 30 mg/L, and SS from 10 to 40 mg/L. The 41W lamp demonstrated complete disinfection showing no survival ratio in all the experimental conditions, and generally 17W and 25W lamps also showed high removal ratio over 97%. For the same UV dose (UV intensity times exposure time), high intensity-short exposure conditions showed better disinfection efficiency than low intensity-long exposure conditions. While the effects of turbidity and DOM were not apparent, the effects of SS was significant on the disinfection efficiency which indicates that SS control before UV-disinfection appears to be necessary to increase removal efficiency. Considering characteristics of effluent from existing wastewater treatment plants, cost-effectiveness, stable performance, and minimum maintenance, the flow-through type UV-disinfection system with high intensity and low-pressure lamps was thought to be a competitive disinfection system for wastewater reclamation.

• Korean Journal of Environment and Ecology
• /
• v.29 no.1
• /
• pp.7-13
• /
• 2015

To examine the relationship between competition and environmental factors, the germlings of Ascophyllum nodosum (L) Le Jolis and Fucus vesiculosus L. were cultured in monocultures and mixtures of the two species under two different exposure and nutrient levels. Both intra- and inter-specific competition were examined in comparison of the mortality and growth of germlings in monocultures and mixtures of the two species. The mortality of germlings increased with increasing density and emergence periods both in the monoculture and mixtures of the two species, and the mortality of Ascophyllum was significantly higher than that of Fucus both in submerged and emerged treatments. The growth of germlings of both species reduced with increasing density but F. vesiculosus always grew faster than Ascophyllum. The values of log output ratio were more than 0.1, indicating that Fucus 'won' in the competitive battles with Ascophyllum under two nutrient- and air-exposure levels. Log output ratio was greater in high than in low nutrients, indicating that the growth of Fucus is more enhanced than that of Ascophyllum in high nutrients. In the present study, the outcome of inter specific competition between germlings of Fucus vesiculosus and Ascophyllum nodosum was slightly altered by duration of emergence and nutrient concentration, but not to such an extent as to change the outcome.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.6
• /
• pp.312-321
• /
• 2020

Morphology of porous cobalt electro-deposits was systematically investigated as functions of cobalt precursors in the plating bath and applied cathodic current density with a special focus on cobalt nano-rod formation. It was proved that the concentration of cobalt precursor plays little effect on the morphology of cobalt electro-deposits at relatively low plating current density while it significantly affects the morphology with increasing plating current density. Such a dependence was discussed in terms of the kinetics of two competitive reactions of cobalt reduction and hydrogen evolution. Cobalt nano-rod structure was created at specific ranges of cobalt precursor content and applied cathodic current density, and its diameter and length varied with plating time without notable formation of side branches which is usually found during dendrite formation. Specifically, the nano-rod length was preferentially increased in relative short plating time (<15 s), resulting in higher aspect ratio of nano-rod with plating time. Whereas, both the nano-rod length and diameter were increased nearly at the same level in a prolonged plating time, making the aspect ratio unchanged. From the analysis of crystal structure, it was confirmed that the cobalt nano-rod preferentially grew in the form of single crystal on a dense poly-crystalline cobalt thin film initially formed on the substrate.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.4
• /
• pp.131-137
• /
• 2007

In this study, the biodegradation test on lignocellulose under sulfate reducing conditions was carried out. In particular, the interaction between cellulose and lignin was investigated with various g-cellulose/g-lignin (C/L) ratios: 42.15, 4.59, 2.51, 1.14 and 0.7. It was shown that the rate of cellulose degradation decreased in proportion to the lignin content. Assuming first order degradation kinetics, the consequences of competitive inhibition were graphically shown for different C/L ratios. The relation between cellulose reduction rate and C/L ratio was expressed by logarithm function with a determination coefficient of 0.97. Lignocellulose reduction rate was also described as a logarithm function of C/L ratio showing a inhibition effect by lignin. In the mean time, the rate of lignin decomposition was higher at C/L ratio of 2.51 and 1.14 compared with C/L ratios of 4.59 and 0.7, indicating that excessive extra carbon source is not appropriate for lignin biodegradation.

• Journal of Environmental Science International
• /
• v.31 no.7
• /
• pp.569-577
• /
• 2022

This study aimed to evaluate the growth of Cichorium intybus, Brassica juncea, and Lactuca sativa at varying seed ratios, and to suggest an efficient management plan for sustainable indoor agriculture systems. It was treated with mixed sowing as follows: 30 chicory seeds (chicory alone: CC), 22 chicory seeds + 8 lettuce seeds (C₃L₁), 20 chicory seeds + 10 lettuce seeds (C₂L₁), 15 chicory seeds + 15 lettuce seeds (C₁L₁) as intraspecies, and 30 mustard seeds (mustard alone: MC), 22 mustard seeds + 8 lettuce seeds (M₃L₁), 20 mustard seeds + 10 lettuce seeds (M₂L₁), 15 mustard seeds + 15 lettuce seeds (M₁L₁) as interspecies. The study identified the competitive response in seed germination between Cichorium intybus and Lactuca sativa, and in the C₃L₁ experimental group, Lactuca sativa had the highest leaf length, root length, chlorophyll content, and fresh weight. Therefore, the higher the ratio of Cichorium intybus, the higher the growth and productivity of Lactuca sativa; however, higher the ratio of Lactuca sativa, the lower the growth of Cichorium intybus. Furthermore, the nitrogen and potassium content in the substrate was the highest in the C₃L₁ experimental grorp which had the highest seeding rate of the Cichorium intybus. Comparing the groups Brassica juncea and Lactuca sativa, the higher the seeding ratio of Lactuca sativa, the higher the growth and productivity of Brassica juncea. Therefore, a companion seeding of Brassica juncea and Lactuca sativa is beneficial; this could be effective in having a high seeding ratio of Lactuca sativa.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1860-1862
• /
• 2004

It is widely known that the ultra high frequency (UHF) method that detects the electromagnetic wave of the PD pulses in the gas insulated space is one of the most competitive methods for its high sensitivity. From the above point of view, this paper describes the characteristics of GIS PD signals measured with ultra wide band (UWB) GIS PD detecting system in which PD signals are detected into the dual UHF band. The UWB PD detection system consists of the UWB UHF coupler, the UWB low noise amplifier (LNA) and the oscilloscope. The dual bands for PD signals are 0.5-2GHz(full band) and 1-2GHz(high band). As results, it was found that the partial discharges of each defect have their own characteristic pattern and the ratio of High band to Full band increases with gas pressure.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1024-1026
• /
• 2004

We have developed the five mask $PMOS^1$ and the six mask CMOS process architecture for poly-Si TFT. In order to have a competitive process with that for a-Si TFT, the simple co-planar electrode structure whose data line electrode and pixel electrode are on the same plane was adopted. In addition, RGB + White four color $technology^2$ were applied to achieve high aperture ratio and transmittance. Using the aforementioned process architecture and four color technology, 2.0 inch qCIF transmissive micro-reflectance (TMR) device was successfully fabricated.

• Journal of Korean Society for Quality Management
• /
• v.32 no.3
• /
• pp.182-197
• /
• 2004

In this paper we propose a new method of evaluating customers' service quality using triangle fuzzy numbers and semantic differential scale. These two parameters are useful for quantifying the customers' linguistic variables and subjective judgements. We define the Service Quality(SQ) as the ratio of the expected and perceived service and address the Agreement Rate(AR) calculated from the hamming distance in order to define the Service Rate(SR) as the geometric mean of the SQ and AR. Using the SR in the analysis of service attributes provides more appropriate to measure the customers' service quality and to establish a creative service policy for competitive service quality improvement.

• Journal of Information Technology Services
• /
• v.11 no.2
• /
• pp.307-317
• /
• 2012

We investigate the long-term effect of servitization strategy on firm value. Manufacturing companies recognize servitization as their competitive strategies. While most of existing literature have focused on developing theory, presenting framework, or cases, only a few papers examine effects of servitization strategy empirically. We aims to empirically test the long-term relationship between servitization strategy and firm value. Service ratio and Tobin's q are used to measure the degree of servitization and firm performance, respectively. Data set covers 130 manufacturing companies for 12 years from 1998 to 2009.