• Journal of Welding and Joining
• /
• v.27 no.5
• /
• pp.49-54
• /
• 2009

Recently, a demand of ferritic STS is increasing rapidly in automobile exhaust system. Exhaust manifolds are the part nearest to the engine so that the material is exposed to high temperature exhaust gas. Excellent heat resistant properties, especially high temperature strength, thermal fatigue resistance and high corrosion resistance are necessary for these parts. STS429L contains 15 weight percent of Cr and low Mo, so has good price competitive. And it has excellent high temperature strength and corrosion resistance, so receives attentions as material that applying to exhaust manifold. In tensile test of lap joint welded STS 429L, most of specimens are failed in base metal, but occurs brittle fracture in weld metals at some specimens in the face of good welding conditions. In the process of tensile test, lap joint welded STS429L specimens are transformed locally. The brittle fracture occurs that local transforming area exists in weld metals. But, butt welding specimens made by same materials showed ductile fracture in tensile test and bending test. In this study, suppose the reason of brittle fracture is in the combined local transform and tensile stress, through analysis of bead geometry, evaluate geometrical factor of brittle fracture in lap joint welded STS429L.

• Textile Coloration and Finishing
• /
• v.28 no.4
• /
• pp.246-252
• /
• 2016

In comparison to metal alloys, braided composite features a high impact resistance and crash energy absorption potential, and also it still remained competitive stiffness and strength properties. Braiding angle is one of the most important parameters which affect the mechanical behaviors of braided composite. This paper presents transverse low velocity impact failure behavior analysis on the carbon 3D triaxial braided composite tube with the braiding angle of $20^{\circ}$, $50^{\circ}$ and $80^{\circ}$. The flexural behaviour of 3D triaxial braided composite tube under bending loads was studied by conducting quasistatic three point bending test. Also, the low velocity impact responses of the braided composite tubes were also tested to obtain load-displacement curves and energy absorption. Consequently, the increase of the braided angle, the peak load also increases owing to the bigger bending stiffness.

• Progress in Medical Physics
• /
• v.19 no.3
• /
• pp.186-190
• /
• 2008

In this study, we describe the preliminary application for the delineation of a metal object using cone-beam reconstruction (CBR) based on limited electronic portal imaging device (EPID) projections. A typical Feldkamp, Davis and Kress (FDK) reconstruction algorithm accompanying the edge preserving smoothing filter was used as only a few projections are acquired for reconstruction. In a correlation study of the projection numbers, we found that the size of the seeds and their location depicted by these CBR images were almost identical. Limited views were used for CBR, and our method is inexpensive and competitive for use in clinical applications.

• BMB Reports
• /
• v.38 no.5
• /
• pp.584-590
• /
• 2005

Glucose 6-phosphate dehydrogenase (EC 1.1.1.49) was purified from Aspergillus aculeatus, a filamentous fungus previously isolated from infected tongue of a patient. The enzyme, apparently homogeneous, had a specific activity of $220\;units\;mg^{-1}$/, a molecular weight of $105,000{\pm}5,000$ Dal by gel filtration and subunit size of $52,000{\pm}1,100$ Dal by sodium dodecyl sulphate-polyacrylamide gel electrophoresis. The substrate specificity was extremely strict, with glucose 6-phosphate (G6P) being oxidized by nicotinamide adenine dinucleotide phosphate (NADP) only. At assay pH of 7.5, the enzyme had $K_m$ values of $6\;{\mu}m$ and $75\;{\mu}m$ for NADP and G6P respectively. The $k_{cat}$ was $83\;s^{-1}$. Steady-state kinetics at pH 7.5 produced converging linear Lineweaver-Burk plots as expected for ternary-complex mechanism. The patterns of product and dead-end inhibition suggested that the enzyme can bind NADP and G6P separately to form a binary complex, indicating a random-order mechanism. The enzyme was irreversibly inactivated by heat in a linear fashion, with G6P providing a degree of protection. Phosphoenolpyruvate (PEP), adenosinetriphosphate (ATP), and fructose 6-phosphate (F6P), in decreasing order, are effective inhibitors. Zinc and Cobalt ions were effective inhibitors although cobalt ion was more potent; the two divalent metals were competitive inhibitors with respect to G6P, with $K_i$ values of $6.6\;{\mu}m$ and $4.7\;{\mu}m$ respectively. It is proposed that inhibition by divalent metal ions, at low NADPH /NADP ratio, is another means of controlling pentosephosphate pathway.

• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.248-257
• /
• 2020

This study presents an initial design for a novel system consisting in a coupled nuclear reactor and a phase change material-based thermal energy storage (TES) component, which acts as a buffer and regulator of heat transfer between the primary and secondary loops. The goal of this concept is to enhance the capacity factor of nuclear power plants (NPPs) in the case of high integration of renewable energy sources into the electric grid. Hence, this system could support in elevating the economics of NPPs in current competitive markets, especially with subsidized solar and wind energy sources, and relatively low oil and gas prices. Furthermore, utilizing a prismatic-core advanced high temperature reactor (PAHTR) cooled by a molten salt with a high melting point, have the potential in increasing the system efficiency due to its high operating temperature, and providing the baseline requirements for coupling other process heat applications. The present research studies the neutronics and thermal hydraulics (TH) of the PAHTR as well as TH calculations for the TES which consists of 300 blocks with a total heat storage capacity of 150 MWd. SERPENT Monte Carlo and MCNP5 codes carried out the neutronics analysis of the PAHTR which is sized to have a 5-year refueling cycle and rated power of 300 MW_th. The PAHTR has 10 metric tons of heavy metal with 19.75 wt% enriched UO₂ TRISO fuel, a hot clean excess reactivity and shutdown margin of $33.70 and -$115.68; respectively, negative temperature feedback coefficients, and an axial flux peaking factor of 1.68. Star-CCM + code predicted the correct convective heat transfer coefficient variations for both the reactor and the storage. TH analysis results show that the flow in the primary loop (in the reactor and TES) remains in the developing mixed convection regime while it reaches a fully developed flow in the secondary loop.

• Journal of Plant Biology
• /
• v.20 no.2
• /
• pp.91-101
• /
• 1977

Using barley seeds (Hordeum sativum Jess, var.), the influences of gibberellic acid (GA) and indole-3-acetic acid(IAA) on the amylase synthesis and that of the nucleic acid metabolism were investigated. 1. With the deembrynized barley seeds, the increase of amylase treated with a $10^{-5}M$ of GA and the decrease of amylase treated with $10^{-5}M$IAA were matched by a proportionate increase and decrease in the amount of RNA. The influence of the hormones on the RNA synthesis has appeared immediately after the treatment but on the amylase synthesis it has appeared 8 hours later. But no influence on the DNA synthesis was observed on both hormones. 2. The amylase from deembryonized barley seeds treated with GA and IAA have been fractionated by gel filteration on Sephadex G-100. The amylase components showed four fractions on both enzymes treated with GA and IAA. Fraction I(FI) was differed from fraction Ⅵ(FIV) in Km value and the effects of temperature, pH and metal ions. On the basis of their emzymatic properties, it was considered that the FI was $\beta$-amylase and FIV was $\alpha$-amylase. The influences of GA and IAA on each fractions appeared to be similar but on the amylase units per souble protein, IAA inhibited the production of amylase FIV while it promoted that of amylase FI. 3. An experiment was conducted to determine whether IAA inhibits GA-promoted amylase synthesis competitively or non-competitively. Using a Lineweaver-Burk plot, it was clear that IAA was acting in a non-competitive fashion. From this, IAA was probably not competing with GA at the same site, but it was acting at some other site which resutled in partial blocking of the action of GA on the amylase synthesis.

• Progress in Superconductivity
• /
• v.7 no.1
• /
• pp.69-76
• /
• 2005

Complex single buffer composed of yttrium and samarium oxide was deposited on the metallic substrates by MOCVD (metal organic chemical vapor deposition) method using single liquid source. Two different types of the substrates with in-plane textures of about $8{\sim}10$ degree of Ni and $3at.\%W-Ni$ alloy were used. Y(tmhd: 2,2,6,6-tetramethyl-3,5-heptane dionate)$_3$:Sm(tmhd)$_3$ of liquid source was adjusted to 0.4:0.6 to minimize the lattice mismatch between the complex single buffer and the YBCO. The epitaxial growth of $(Y_{x}Sm_{1-x})_{2}O_3$ was achieved at the temperature higher than $500^{\circ}C$ in $O_2$ atmosphere. However, it was found that the formation of NiO accelerated with increasing deposition temperature. By supplying $H_{2}O$ vapor, this oxidation of the substrate could be suppressed throughout the deposition temperatures. We could get the epitaxial growth on pure Ni substrate without the formation of NiO. The competitive (222) and (400) growths were observed at the deposition temperatures of $650\~750^{\circ}C$, but the (400) growth became dominant above $800^{\circ}C$. The $(Y_{x}Sm_{1-x})_{2}O_3$-buffered metallic substrates can be used as the buffer for YBCO coated conductor.

• The Journal of the Korea Contents Association
• /
• v.7 no.12
• /
• pp.66-73
• /
• 2007

The Jewelry-relation industry is being placed in the crises which are serious with depression of domestic market, design development and a major force absence also high labor cost charge. The consumers have the value of the price preparation maximum and product differentiation which they want. The Jewelry CAD and RP equipment shorten cost of production enterprise which depended hand-metal work provided for the various design and a rapid new product. But until now, it was necessary to the original work of best condition casting vacuum cycle as difficult with direct casting of synthetic resin from RP equipment. I intend to imply significance about through the CAD and RP equipment application result with it analyses, after jewelry CAD and RP work applicable to direct casting will be possible and able to through the casting vacuum cycle produce the product which is suitable in the original production. Through the this paper jewelry secures a quality improvement of the product and discrimination characteristic being various competitive power of design and provide a new base in product production.

• Korean Journal of Materials Research
• /
• v.28 no.1
• /
• pp.38-42
• /
• 2018

Continuous efforts are being made to improve the efficiency of Si solar cells, which is the prevailing technology at this time. As opposed to the standard front-lit solar cell design, the back-lit design suffers no shading loss because all the metal electrodes are placed on one side close to the pn junction, which is referred to as the front side, and the incoming light enters the denuded back side. In this study, a systematic comparison between the two designs was conducted by means of computer simulation. Medici, a two-dimensional semiconductor device simulation tool, was utilized for this purpose. The $0.6{\mu}m$ wavelength, the peak value for the AM-1.5 illumination, was chosen for the incident photons, and the minority-carrier recombination lifetime (${\tau}$), a key indicator of the Si substrate quality, was the main variable in the simulation on a p-type $150{\mu}m$ thick Si substrate. Qualitatively, minority-carrier recombination affected the short circuit current (Isc) but not the opencircuit voltage (Voc). The latter was most affected by series resistance associated with the electrode locations. Quantitatively, when ${\tau}{\leq}500{\mu}s$, the simulation yielded the solar cell power outputs of $20.7mW{\cdot}cm^{-2}$ and $18.6mW{\cdot}cm^{-2}$, respectively, for the front-lit and back-lit cells, a reasonable 10 % difference. However, when ${\tau}$ < $500{\mu}s$, the difference was 20 % or more, making the back-lit design less than competitive. We concluded that the back-lit design, despite its inherent benefits, is not suitable for a broad range of Si solar cells but may only be applicable in the high-end cells where float-zone (FZ) or magnetic Czochralski (MCZ) Si crystals of the highest quality are used as the substrate.

• Analytical Science and Technology
• /
• v.12 no.3
• /
• pp.256-259
• /
• 1999

Tyrosinases are related to the enzymatic browning of plants and attract the major scientific interest for the prevention of it. Three tyrosinase isozymes ($P_1$, $P_2$ and $P_3$) from pine needles were purified to homogeneity and characterized the factors that affect their activities. The L-ascorbic acid and ${\beta}$-mercaptoethanol notably inhibited the enzymatic activities of the three isozymes. The sodium diethyldithiocarbamate was a competitive inhibitor of isozymes with the $K_i$ values of $P_1$(0.030 mM), $P_2$(0.015 mM) and $P_3$(0.019 mM), respectively. Their enzyme activities were however, increased by the addition of most metal ions. The optimum pH for the three isozymes was 9.0~9.5 and the optimum temperatures ranged from 55 to $60^{\circ}C$ using L-DOPA as substrate.