Textile Coloration and Finishing (한국염색가공학회지)

The Korean Society of Dyers and Finishers (한국염색가공학회)
권호 표지
DOI QR코드

DOI QR Code

Transverse Low Velocity Impact Failure Behavior of Triaxial Braided Composite Tube with Different Braiding Angles

Triaxial braiding 기술을 이용한 원형 튜브의 횡방향 저속충격파괴 거동분석

  • Sim, Ji-hyun (Korea Dyeing and Finishing Technology Institite(DYETEC)) ;
  • Park, Sung-min (Korea Dyeing and Finishing Technology Institite(DYETEC)) ;
  • Kim, Ji-hye (Korea Dyeing and Finishing Technology Institite(DYETEC)) ;
  • Shin, Dong-woo (Korea Dyeing and Finishing Technology Institite(DYETEC)) ;
  • Chon, Jin-sung (Department of Composite Materials R&D Center, Textile for Life(T4L)) ;
  • Kim, Jae-kwan (Department of Composite Materials R&D Center, Textile for Life(T4L)) ;
  • Bae, Jin-Seok (Department of Textile System Engineering, Kyungpook National University)
  • Received : 2016.10.07
  • Accepted : 2016.12.14
  • Published : 2016.12.27
Download PDF
⟨ Previous Next ⟩

Abstract

In comparison to metal alloys, braided composite features a high impact resistance and crash energy absorption potential, and also it still remained competitive stiffness and strength properties. Braiding angle is one of the most important parameters which affect the mechanical behaviors of braided composite. This paper presents transverse low velocity impact failure behavior analysis on the carbon 3D triaxial braided composite tube with the braiding angle of $20^{\circ}$, $50^{\circ}$ and $80^{\circ}$. The flexural behaviour of 3D triaxial braided composite tube under bending loads was studied by conducting quasistatic three point bending test. Also, the low velocity impact responses of the braided composite tubes were also tested to obtain load-displacement curves and energy absorption. Consequently, the increase of the braided angle, the peak load also increases owing to the bigger bending stiffness.

Keywords

References

  1. M. Zhang, B. Sun, and B. Gu, Accelerated Thermal Ageing of Epoxy Resin and 3-D Carbon Fiber/Epoxy Braided Composites, Composites: Part A., 85, 163 (2016). https://doi.org/10.1016/j.compositesa.2016.03.028
  2. K. H. Tsai, C. H. Chin, and T. H. Wu, Fatigue Behavior of 3D Multi-layer Angle Interlock Woven Composite Plates, Composite Science and Technology, 60, 241 (2000). https://doi.org/10.1016/S0266-3538(99)00120-7
  3. H. Zhou, W. Zhang, T. Liu, B. Gu, and B. Sun, Finite Element Analyses on Transverse Impact Behaviors of 3-D Circular Braided Composite Tubes with Different Braiding Angles, Composites: Part A., 79, 52(2015). https://doi.org/10.1016/j.compositesa.2015.09.012
  4. R. Sturmand F. Heieck, Energy Absorption Capacity of Braided Frames under Bending Loads, Composite Structures, 134, 957(2015). https://doi.org/10.1016/j.compstruct.2015.09.008
  5. R. Parimala and D. B. Jabaraj, A Study on Nanophased Biaxial Carbon Braided Composites, Materialstoday Proceedings, 3, 2268 2016).
  6. S. C. Quek, A. M. Waas, K. W. Shahwan, and V. Agaram, Failure Mechanics of Triaxially Braided Carbon Composites under Combined Bending-compression Loading, Composite Science and Technology, 66, 2548 (2006). https://doi.org/10.1016/j.compscitech.2006.01.022
  7. M. Miron, H. Katzinger, S. Neudorfer, E. Pitz, and Z. Majoria, Mechanical Testing and Numerical Predictions of the Behavior of Braided Carbon Fiber Components, Procedia Structral Integrity, 2, 3593(2016). https://doi.org/10.1016/j.prostr.2016.06.448
  8. Z. H. Tan, B. Jia, B. J. Pang, and B. Z. GaiI, The Effect of Braid Angle on the Dynamic Response of 3-D Four Direction Carbon/Epoxy Braid Composites at High Strain Rates, Structures Under Shock and Impact, IX, 137(2006).
  9. Y. Shinyama, Y. Hatsukade, S. Tanaka, Y. Takai, M. S. Aly-Hassan, A. Nakai, and H. Hamada, Prediction of Initiation Site of Destruction of Flat Braided Carbon Fiber Composites using HTS-SQUID Gradiometer, Physics Procedia, 36, 150(2012). https://doi.org/10.1016/j.phpro.2012.06.062
  10. Y. Hatsukade, K. Yoshida, T. Kage, Y. Takai, M. S. Aly-Hassan, A. Nakai, H. Hamada, and S. Tanaka, Visualization of Flowing Current in Braided Carbon Fiber Reinforced Plastics using SQUID Gradiometer for Nondestructive Evaluation, J. of Physics: Conference Series, 433, 1(2013).
  11. D. K. Seo, N. R. Ha, J. H. Lee, H. G. Park, and J. S. Bae, Property Evaluation of Epoxy Resin based Aramid and Carbon Fiber Composite Materials, Textile Coloration and Finishing, 27(1), 11(2015). https://doi.org/10.5764/TCF.2015.27.1.11
  12. J. M. Park, Y. G. Park, Y. H. Lee, D. J. Seo, J. H. Lee, and H. D. Kim, Properties of Randomly Oriented Chopped E-glass Reinforced Unsaturated Polyester based Resin Composite, Textile Coloration and Finishing, 27(3), 165(2015). https://doi.org/10.5764/TCF.2015.27.3.165