• 한국환경농학회지
• /
• 제34권1호
• /
• pp.21-29
• /
• 2015

BACKGROUND: Heavy metal adsorptionnot only depends on biochar characteristics but also on the nature of the metals involved and on their competitive behavior for biochar adsorption sites. The goal of this study was to investigate the competitive absorption characteristics of Cu and Cd in mono-metal and binary-metal forms by biochar derived from Phragmites communis. METHODS AND RESULTS: Batch and column experiments were conducted to evaluate the competitive adsorption characteristics of the biocharfor Cu and Cd. In the batch experiments, the maximum adsorption capacity of Cd(63 mg/g) by biochar was higher than that for Cu (55 mg/g) in the mono-metal adsorption isotherm. On the other hand, the maximum Cu adsorption capacity (40 mg/g) by biochar was higher than that for Cd(25 mg/g) in the binary-metal adsorption isotherm. Cu was the most retained cations. Cd could be easily exchanged and substituted by Cu. The amounts of adsorbed metals in the column experiments were in the order of Cd (121 mg/g) > Cu (96 mg/g) in mono-metal conditions, and Cu (72 mg/g) > Cd (29 mg/g) in binary-metal conditions. CONCLUSION: Overall, the results demonstrated that competitive adsorption among metals increased the mobility of these metals. Particularly, Cd in binary-metal conditions lost its adsorption capacity most significantly.

• 한국응용과학기술학회지
• /
• 제22권1호
• /
• pp.9-14
• /
• 2005

Competitive solvent extraction of alkaline earth metal cations from water into organic solvent containing the carboxylic acid crown ether and analogous crown ether phosphonic acid monoethyl esters were investigated. sym-(n-Decyldibenzo)-16-crown-5xyacetic acid $\underline{1}$ and monoethyl sym-(n-decyldibenzo)-16-crown-5-oxymethylphosphonic acid $\underline{3}$ are structurally identical except for the ionizable groups. Both of them provide similar extraction behavior in terms of efficiency and selectivity, but monoethyl sym-(n-decyldibenzo)-16-crown-5-oxymethylphosphonic acid $\underline{3}$ showed higher alkaline earth metals loadings at acidic or neutral media. Monoethylsym-(n-octyldibenzo)-16-rown-5-oxymethylphosphonic acid $\underline{2}$ showed better selectivity and alkaline earth metals loading than did the analogous sym-(n-octyldibenzo)-16-crown-5-oxymethyldiphosphonic acid $\underline{6}$.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.480-484
• /
• 2004

Despite is product that existent higher hrust engine, ship, vehicles, development equipment and Metal Bearing for plant equipment Cast White Metal Lining Bearing that is Bimetal Bearing standing 2 generation is accomplishing master and servant and this is foreseen to be used widely on industry whole in hereafter but Cast White Metal Bearing need minuteness processing, price competitive power is depending on income from superior another thing area than itself manufacture already in advanced nation to lowdown that the technique is generalized widely.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.590-594
• /
• 2011

An aminocarboxy aspartic acid-bonded silica (Asp-Silica) stationary phase was synthesized using L-aspartic acid as ligand and silica gel as matrix. The standard protein mixtures were separated with prepared chromatographic column. The effects of solution pH, salt concentration and metal ion on the retention of proteins were examined, and also compared with traditional iminodiacetic acid-bonded silica (IDA-Silica) column. The results show that Asp-Silica column exhibited an excellent separation performance for proteins. The retention of proteins on Asp-Silica stationary phase was consistent with electrostatic characteristic of cation-exchange. The stationary phase displayed typical metal chelate property after fixing copper ion (II) on Asp-Silica. Under competitive eluting condition, protein mixtures were effectively isolated. Asp ligand showed better ion-exchange and metal chelating properties as compared with IDA ligand.

• 한국환경농학회지
• /
• 제35권1호
• /
• pp.24-31
• /
• 2016

본 연구는 산업폐기물의 일종인 제강급랭슬래그의 중금속 폐수처리를 위한 여재로서의 활용도를 높이고자 단일 및 복합 중금속용액에 대한 제강급랭슬래그의 경쟁흡착특성을 조사하였다. Freundlich 등온흡착식을 이용한 Cd, Cu 및 Zn의 흡착능은 단일 용액일 때 각각 2.21, 2.56 및 0.89이었으며, 복합 용액일 때는 각각 0.31, 1.28 및 0.37이었으며, Langmuir 등온흡착식을 이용한 제강급랭슬래그의 최대흡착능은 단일 용액일 때 Cu(16.6 mg/g) > Cd(8.1 mg/g) > Zn(6.2 mg/g)순이었으며, 복합 용액일 때 Cu(14.5 mg/g) >> Zn(1.3 mg/g) > Cd(0.6 mg/g)이었다. Freundlich와 Langmuir 등온흡착식은 모두 동일한 경향으로 단일 용액에서 최대흡착능에 비해 복합 용액일 때 흡착능은 감소하는 경향이었다. 특히 Cu의 경우는 단일 용액에 비해 복합용액일때 흡착능이 12.6% 정도로 약간 감소하였으나, Cd 및 Zn의 경우는 단일 용액에 비해 복합 용액일 때 흡착능이 각각 92.6% 및 79.0% 정도로 현저하게 감소함을 알 수 있었다. 이상의 결과를 미루어 볼 때, Cd 및 Zn은 경쟁 이온이 없는 단일 용액에서는 흡착제에 대해 높은 흡착능을 보였으나, 복합용액에서는 경쟁관계인 Cu에 의해 상대적으로 흡착능이 감소한 것으로 판단된다. 제강급랭슬래그의 단일 및 복합중금속 용액에서 Cd, Cu 및 Zn의 흡착량은 전반적으로 Langmuir 등온흡착식이 Freundlich 등온흡착식에 비해 잘 일치하였으며, 또한 단일 및 복합중금속 용액에서 각 금속의 흡착패턴은 각 금속의 경쟁으로 인하여 서로 다른 패턴을 가지는 것을 알 수 있었다. 따라서 제강급랭슬래그는 중금속 폐수처리를 위한 여재로 충분히 활용이 가능할 것으로 판단된다.

• Bulletin of the Korean Chemical Society
• /
• 제16권1호
• /
• pp.33-36
• /
• 1995

Macrocyclic ligands have been studied as cation carriers in a supported liquid membrane system. Cd2+ has been transported using nitrogen substituted macrocycles as carriers and several divalent metal ions (M2+=Zn, Co, Ni, Cu, Pb, Mg, Ca, and Sr) have been transported using DBN3O2, DBN2O2and PolyNtnoen as carriers in a supported liquid membrane system. Competitive Cd2+-M2+ transport studies have also been carried out with the same system. Ligand structure, stability constant, membrane solvent and carrier concentration are also important parameters in the transport of metal ions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.792-795
• /
• 2004

Despite is product that ship, vehicles, development equipment and Metal Bearing for plant equipment that is mass-produced by present domestic companies Cast White Metal Lining Bearing that is Bimetal Bearing standing 2 generation is accomplishing master and servant and this is foreseen to be used widely on industry whole in hereafter but Cast White Metal Bearing need minuteness processing, while price competitive power is depending on income from superior another thing area than itself manufacture already in advanced nation to lowdown that the technique is generalized widely, when take into account technology change aspect of industrial technology developing country, Go added value creation by deepening of price competition is judged to be difficult hereafter. Because domestic production and supply are wholly lacking almost in Metal Bearing Cladding that take advantage of these technology, Data-base about connection technology is weak with technique and Know-How for product. This research unites Back Steel and Aluminium Alloy different kind metal and make the Clad river studying technology about union of Gogangseong Dacheung metal bearing hereupon.

• Structural Engineering and Mechanics
• /
• 제65권4호
• /
• pp.447-452
• /
• 2018

The controlling and prediction of spring back is one of the most important factors in sheet metal forming processes which require high dimensional precision. The relationship between effective parameters and spring back phenomenon is highly nonlinear and complicated. Moreover, the objective function is implicit with regard to the design variables. In this paper, first the influence of some effective factors on spring back in U-die bending process was studied through some experiments and then regarding the robustness of artificial neural network (ANN) approach in predicting objectives in mentioned kind of problems, ANN was used to estimate a prediction model of spring back. Eventually, the spring back angle was optimized using the Imperialist Competitive Algorithm (ICA). The results showed that the employment of ANN provides us with less complicated and time-consuming analytical calculations as well as good results with reasonable accuracy.

• Journal of Welding and Joining
• /
• 제22권2호
• /
• pp.46-50
• /
• 2004

In today's highly competitive marketplace, it is of great significance for the manufacturing industry to reduce lead-time and costs fur the product development. Since first emerged in 1986, Rapid Prototyping (RP) technology has helped successfully to reduce time and costs. Recently, RP using functional materials such as metal has been researched. However RP using the molten metal has been struggling to resolve several drawbacks, such as dimensional inaccuracy, poor surface finish, post finishing, etc., that originate primarily from the overall deposition of molten metal for each layer. So, the purpose of this study is to develop a new RP technique using sheet metal and projection welding for reducing several drawbacks in occurring RP using molten metal. Also tensile and bending specimens were made by the developed RP process using projection welding and were verified.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.93-94
• /
• 2006

A novel production method for porous metal components has been developed by applying powder space holder (PSH) method to metal powder injection molding (MIM) process. The PSH-MIM method has an industrial competitive advantage that is capable of net-shape manufacturing the micro-sized porous metal products with complicated shapes and controlled porosity and pore size. In this study, the small impeller with homogeneous micro-porous structure was manufactured by the PSH-MIM method. The effects of combinations in size and fraction of PMMA particle on dimensional tolerance and variation of sintered porous specimens were investigated. It was concluded that the PSH-MIM method could manufacture commercially microporous metal components with high dimensional accuracy.