• ETRI Journal
• /
• 제45권4호
• /
• pp.690-703
• /
• 2023

Multistage amplifiers have become appropriate choices for high-speed electronics and data conversion. Because of the large number of high-impedance nodes, frequency compensation has become the biggest challenge in the design of multistage amplifiers. The new compensation technique in this study uses two differential stages to organize feedforward and feedback paths. Five Miller loops and a 500-pF load capacitor are driven by just two tiny compensating capacitors, each with a capacitance of less than 10 pF. The symbolic transfer function is calculated to estimate the circuit dynamics and HSPICE and TSMC 0.18 ㎛. CMOS technology is used to simulate the proposed five-stage amplifier. A straightforward iterative approach is also used to optimize the circuit parameters given a known cost function. According to simulation and mathematical results, the proposed structure has a DC gain of 190 dB, a gain bandwidth product of 15 MHz, a phase margin of 89°, and a power dissipation of 590 ㎼.

• 한국전산구조공학회논문집
• /
• 제23권2호
• /
• pp.139-152
• /
• 2010

본 연구에서는 현장 적용성을 고려한 기둥축소량의 최적보정시스템을 그래픽-사용자 인터페이스의 컴퓨터 프로그램으로 개발하였다. 구현된 시스템은 성능 및 시공상의 다양한 제약조건을 만족하면서 상대보정과 혼합보정이 모두 가능하다. 제안된 시스템에서는 기둥축소량 보정전과 보정후의 구조물 형상을 그래픽으로 확인가능하며, 각 층의 보정결과는 기둥축소량 보고서로 바로 활용 가능한 도면으로 출력된다. 제안된 시스템을 실제 축소량 보정이 수행된 61, 42, 49, 53층의 네 건물에 적용한 결과, 제약조건을 쉽게 변경하면서 축소량 보정을 수행할 수 있고, 기존의 방법으로는 해를 구하지 못하는 경우에도 손쉽게 해를 구할 수 있어 현장 적용성이 뛰어남을 확인하였다.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권12호
• /
• pp.293-308
• /
• 2020

This study aims to investigate the direct relationship between ownership structure, earnings manipulation, and organizational performance, and then examine the mediating effect of earnings manipulation in the relationship between ownership structure and organizational performance. This study collected and analyzed secondary data published in financial reports related to all insurance organizations listed in the Jordanian market during the study period (from 2009 until 2018). A panel data analysis was conducted, giving a total of 200 observations. The findings of this study concluded that ownership concentration, foreign ownership, and organization size affect organizational performance proxied by ROA, ROE, and EPS, more specifically, ownership concentration and organization size have a positive effect, whereas foreign ownership has a negative effect. At the same time, board of director ownership, organizational ownership, and CEO compensation did not affect organizational performance. Next, the board of director ownership, ownership concentration, foreign ownership, and CEO compensation affect earnings manipulation separately. In addition, earnings manipulation positively affects organizational performance proxied by ROA, ROE and EPS. This means that the higher the earnings manipulation is, the higher the organizational performance is. Finally, earnings manipulation mediates the relationship between ownership concentration and foreign ownership of ownership structure, and organizational performance.

• 제어로봇시스템학회논문지
• /
• 제10권12호
• /
• pp.1202-1209
• /
• 2004

This paper presents a design methodology of a Digital Servo Signal Processor for high speed CD-RW drive systems. The proposed Digital Servo Signal Processor enables us to develop CD-related systems for the very high speed applications and is one of the key components of the CD-RW systems. The proposed center compensation servo control is newly built for an actuator shaking due to the fast response of a step motor when it jumps to a long distance. A control method compensating for eccentricity of a disc is implemented for operating robustly at a higher rotational speed. This servo mechanism is more size efficient and less power consumed because it is implemented using a ARM7 embedded processor and hardware digital filters. Furthermore, it is convenient to upgrade firmware for the future required functions. From experimental results, we can see that the performance of the control system is improved greatly. The proposed servo algorithm shows a shorter setting time including a pull-in time and a faster access time. It can be applied easily to the DVD-ROM and the DVD-RAM which have the same optical structure.

• 한국콘텐츠학회논문지
• /
• 제16권2호
• /
• pp.45-56
• /
• 2016

본 논문은 판매원의 경험에 따라 임금이 최적 임금이 어떻게 변화하는 지에 대하여 고찰하였다. 판매원의 경험이 판매 성과에 미치는 영향이 크지 않은 경우를 가정한 기존 논문과 달리, 우리는 판매원의 적정 수준 이상의 경험이 판매원의 업무 능력에 필수적인 환경에서, 판매에 따르는 인센티브 보상제도가 항상 최적이 아님을 밝혀냈다. 이 결과는 기존 논문들에서 다루어지지 않은 현상일 뿐 아니라, 현업에서 드물지 않게 관찰되는 임금 보상 제도를 설명한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.805-808
• /
• 2008

피복이 없는 FBG센서는 내구성이 약하기 때문에, 실제 토목구조물에서는 적용이 어렵다. 따라서 packaged FBG센서는 피복이 없는 FBG센서의 단점을 보안하고, 실제 구조물에 적용이 가능하도록 발전된 형태이다. 이런 packaged FBG센서를 이용하여 변형률과 온도를 동시에 측정할 때, 온도보정은 없어서는 안 될, 필수적 기술이다. 이 논문에서는 steel sleeve packaged FBG센서의 온도보정 기술을 도출하고, 콘크리트 보부재를 이용한 실험을 통해 온도보정 기술의 현장적용 가능성을 제시하였다. 따라서 이 논문에서 사용된 온도보정 기술은 실제 여러 토목구조물의 모니터링에 확대 사용할 수 있다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권2호
• /
• pp.18-24
• /
• 2006

This paper proposes a LuGre Model-Based Neural Network (MBNN) friction compensation algorithm for a linear motor stage. For matching the friction phenomena in both the motion-start region and the motion-reverse region, the LuGre dynamic model is employed into the proposed compensation algorithm. After training of the model-based neural network is completed, the estimated friction for compensation is obtained. From the obtained result we find that the new structure gains advantage over the non-friction compensation system on the performance of the compensator in both regions. The proposed compensator is evaluated and compared experimentally with an uncompensated system on a microcomputer controlled linear motor tracking system in the final section of the paper. The experimental results show the improvement on the maximum velocity error and the root mean square tracking error in the motion-start region ranges from 34% to 53% and from 53% to 75% respectively, and in the motion-reverse region from 48% to 65% and from 79% to 90% respectively.

• Smart Structures and Systems
• /
• 제4권6호
• /
• pp.809-828
• /
• 2008

Real-time hybrid testing is an attractive method to evaluate the response of structures under earthquake loads. The method is a variation of the pseudodynamic testing technique in which the experiment is executed in real time, thus allowing investigation of structural systems with time-dependent components. Real-time hybrid testing is challenging because it requires performance of all calculations, application of displacements, and acquisition of measured forces, within a very small increment of time. Furthermore, unless appropriate compensation for time delays and actuator time lag is implemented, stability problems are likely to occur during the experiment. This paper presents an approach for real-time hybrid testing in which time delay/lag compensation is implemented using model-based response prediction. The efficacy of the proposed strategy is verified by conducting substructure real-time hybrid testing of a steel frame under earthquake loads. For the initial set of experiments, a specimen with linear-elastic behavior is used. Experimental results agree well with the analytical solution and show that the proposed approach and testing system are capable of achieving a time-scale expansion factor of one (i.e., real time). Additionally, the proposed method allows accurate testing of structures with larger frequencies than when using conventional time delay compensation methods, thus extending the capabilities of the real-time hybrid testing technique. The method is then used to test a structure with a rate-dependent energy dissipation device, a magnetorheological damper. Results show good agreement with the predicted responses, demonstrating the effectiveness of the method to test rate-dependent components.

• Journal of Power Electronics
• /
• 제17권3호
• /
• pp.798-810
• /
• 2017

This paper presents a combined system of a small-capacity inverter and multigroup delta-connected thyristor switched capacitors (TSCs). The system is referred to as a hybrid static compensator (HSC) and has the functions of dynamic reactive power compensation and harmonic suppression. In the proposed topology, the load reactive power is mainly compensated by the TSCs. Meanwhile the inverter is meant to cooperate with TSCs to achieve continuous reactive power compensation, and to filter the harmonics generated by nonlinear loads and the TSCs. First, the structure and mathematical model of the HSC are discussed Then the control method of the HSC is presented. An improved reduced order generalized integrator (ROGI)-based selective current control method is adopted in the inverter to achieve high-performance reactive and harmonic current compensation. Meanwhile, a switch control strategy is proposed to implement precise and fast switching of the TSCs and to avoid changing the time delay needed by the conventional switch strategy. Experiments are implemented on a 20 KVA HSC prototype and the obtained results verify the validity of the proposed HSC system.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.827-834
• /
• 2019

Wireless power transfer via coupled magnetic resonances has been a hot research topic in recent years. In addition, the number of related devices has also been increasing. However, reverse signals transfer is often required in addition to wireless power transfer. The structure of the circuit for a wireless power transfer system via coupled magnetic resonances is analyzed. The advantages and disadvantages of both parallel compensation and series compensation are listed. Then the compensation characteristics of the inductor, capacitor and resistor were studied and an appropriate compensation method was selected. The reverse signals can be transferred by controlling the compensation of the resistor. In addition, it can be demodulated by extracting the change of the primary current. A 3.3 MHz resonant frequency with a 100 kHz reverse signals transfer system platform was established in the laboratory. Experimental results demonstrate that wireless power and reverse signals can be transferred synchronously.