• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제9권4호
• /
• pp.327-332
• /
• 2009

This paper proposes a method to improve the accuracy of a short-term electrical load forecasting (STLF) system based on neuro-fuzzy models. The proposed method compensates load forecasts based on the error obtained during the previous prediction. The basic idea behind this approach is that the error of the current prediction is highly correlated with that of the previous prediction. This simple compensation scheme using error information drastically improves the performance of the STLF based on neuro-fuzzy models. The viability of the proposed method is demonstrated through the simulation studies performed on the load data collected by Korea Electric Power Corporation (KEPCO) in 1996 and 1997.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1298-1300
• /
• 1993

Compensation of temperature is very important to make high precision Load Cell. In this study, we developed a new type of load cell. The structure of the load cell has four strain gauges m single surface of the load cell. Also a new temperature compensation method is proposed and these, characteristics are better than previous one. This study will offer application to other type of load cell end another sensors.

• Geomechanics and Engineering
• /
• 제10권3호
• /
• pp.335-355
• /
• 2016

Most laboratory test research has focused on grouting efficiency in homogeneous reconstituted soft clay. However, the natural sedimentary soils generally behave differently from reconstituted soils due to the effect of soil structure. A series of laboratory grouting tests were conducted to research the effect of soil structure on the performance of compensation grouting. The effects of grouting volume, overlying load and grouting location on the performance of compensation grouting under different soil structures were also studied. Reconstituted soil was altered with added cement to simulate artificial structured soil. The results showed that the final grouting efficiency was positive and significantly increased with the increase of stress ratio within a certain range when grouting in normally consolidated structured clay. However, in the same low yield stress situation, the artificial structured soil had a lower final grouting efficiency than the overconsolidated reconstituted soil. The larger of normalized grouting volume could increase the final grouting efficiency for both reconstituted and artificial structured soils. Whereas, the effect of the overlying load on final grouting efficiencies was unfavourable, and was independent of the stress ratio. As for the layered soil specimens, grouting in the artificial structured soil layer was the most efficient. In addition, the peak grouting pressure was affected by the stress ratio and the overlying load, and it could be predicted with an empirical equation when the overlying load was less than the yield stress. The end time of primary consolidation and the proportion of secondary consolidation settlement varied with the different soil structures, grouting volumes, overlying loads and grouting locations.

• 전자공학회논문지D
• /
• 제34D권8호
• /
• pp.71-79
• /
• 1997

Bulged-type bends with low bending loss are newly proposed, and the FD-BPM is made use of for designing optimum structure. How to evaluate bending loss of conventional bends and how to improve the bending structure based on the phase compensation concept are described in genral. Besides simulation results for the bulged-type bends, results for the coupled-type bends and the chamfered-type bends show the most superior performance in terms of not only the bending loss but also the design tolerance.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1645-1655
• /
• 2016

A Dynamic Voltage Restorer (DVR) model is proposed to eliminate the short-term voltage disturbances that occur in the grid-connected mode, the switching between grid-connected mode and the stand-alone mode of a Microgrid. The proposed DVR structure is based on a conventional cascaded H-bridge multilevel inverter (MLI) topology; a novel composite control strategy is presented, which could ensure the compensation ability of voltage sag by the DVR. Moreover, the compensation to specified order of harmonic is added to implement effects that zero-steady error compensation to harmonic voltage in specified order of the presented control strategy; utilizing wind turbines-batteries units as DC energy storage components in the Microgrid, the operation cost of the DVR is reduced. When the Microgrid operates under stand-alone mode, the DVR can operate on microsource mode, which could ease the power supply from the main grid (distribution network) and consequently be favorable for energy saving and emission reduction. Simulation results validate the robustness and effective of the proposed DVR system.

• 자원환경지질
• /
• 제33권6호
• /
• pp.537-545
• /
• 2000

Shipborne gravity data are analyzed to investigate crustal structure under Dok Island and its surrounding seamounts located in border of Ulleung Basin and Oki Bank in the East Sea. Relatively low free-air gravity anomaly compared with the volume of seamounts may be explainable by isostatic compensation. From 1 st to 3rd Dokdo Seamounts, the decrease of free-air and Bouguer gravity anomalies implies the different degree of isostatic compensation, crustal thickness or/and density contrast. 3-D gravity modelling shows that seamounts have the mirror roots for regional Airy isostatic compensation, and from Ulleung Basin to Oki Bank, Moho discontinuity deepens and the density of crust is decreases. The results infer that study area is transitional zone from thin oceanic to thick continental crust. The depth of Moho discontinuity is about 15∼16 km, which may be interpreted as an uplifting of Mantle to shallow depth comparing with other borders of the Ulleung Basin.

• 센서학회지
• /
• 제28권6호
• /
• pp.414-419
• /
• 2019

An ultrasonic based magnetostrictive position sensor (MPS) provides an indication of real target position. It determines the real target position by multiplying the propagation speed of ultrasonic wave and the time-of-flight between the receiving signals; one is the initial signal by an excitation current and the other is the reflection signal by the ultrasonic wave. The propagation speed of the ultrasonic wave depends on the temperature of the waveguide. Hence, the change of the propagation speed in various environments is a critical factor in terms of the positioning accuracy in the MPS. This means that the influence of the changes in the waveguide temperature needs to be compensated. In this paper, we presents a novel way to improve the positioning accuracy of MPSs using temperature compensation for waveguide. The proposed method used the inherent measurement blind area for the structure of the MPS, which can simultaneously measure the position of the moving target and the temperature of the waveguide without any additional devices. The average positional error was approximately -23.9 mm and -1.9 mm before and after compensation, respectively. It was confirmed that the positioning accuracy was improved by approximately 93%.

• 전기전자학회논문지
• /
• 제27권3호
• /
• pp.234-238
• /
• 2023

본 논문에서는 PVT(process, voltage, and temperature) 변화에 대한 보상기능을 가지는 시간-디지털 변환기(time-to-digital converter : TDC)를 제안한다. 일반적인 지연 라인(delay line) 기반의 TDC는 인버터의 전파 지연을 기반으로 시간을 측정하기 때문에 근본적으로 PVT 변화에 민감하다. 이 논문은 PVT 변화에 의한 전파 지연을 보상하여 TDC의 해상도 변화를 최소화시키는 방법을 제안한다. 또한 넓은 입력 측정 범위(detection range)를 갖기 위해 Cyclic Vernier TDC (CVTDC) 구조를 채택한다. 제안하는 PVT보상 기능의 CVTDC는 45nm CMOS 공정으로 설계되어, 8mW의 전력을 소모하며, 5 ps의 TDC 해상도 및 약 5.1 ns 입력 측정 범위를 갖는다.

• 대한기계학회논문집A
• /
• 제35권6호
• /
• pp.599-607
• /
• 2011

본 논문에서는 별도의 외부 격리 구조물이나 추가 모터가 필요 없는 XY 선형 모션 스테이지를 위한 반발력 보상 시스템을 개발하였다. 개발된 시스템은 이동 가능한 마그넷 트랙, 스프링, 추가 질량을 포함한 자체 반발력 보상 구조를 가지고 있으며 이송용 모터 코일과 마그넷 트랙의 상대 위치를 검출할 수 있는 전용 센서를 개발하여 고정밀 추력 및 위치를 제어에 적용하였다. 먼저 반발력 보상 시스템을 모델링하고 모의 시험을 통해 이동 거리, 가속도, 하중, 허용 가능한 장비 크기와 같은 설계 요소를 최적화 하였다. 반발력 보상 시스템이 구비된 XY 모션 스테이지를 제작하였으며, 해당 시스템의 성능을 실험적으로 검증하였다. 실험결과 10m/$s^2$ 가감속 시에 85%의 반발력이 반발력 보상 시스템에 의해 흡수되었다.

• 대한전자공학회논문지TC
• /
• 제49권4호
• /
• pp.9-17
• /
• 2012

이 논문에서는 광대역 신호에 대한 전력 증폭기의 메모리 효과를 보이고, 메모리 효과와 결합된 비선형성의 보상 방법을 제시하고 그 성능을 분석한다. 메모리 효과와 결합된 전력 증폭기의 모델링과 보상을 위해 볼테라 급수 모델, 위너 모델, 그리고 해머스타인 모델을 검토하였다. 보상 방법으로는 디지털 피드포워드 기술을 제안하였다. 이 방식은 아날로그 방식의 피드포워드 방식에 비해 안정성과 환경 적응성 등이 우수하고, 기존의 디지털 비선형 보상 방식들에 비해 구조가 간단하다. 애질런트사의 ADS를 이용한 모의실험을 통하여 성능을 살펴본 결과 주파수대역 재성장이 20 dB 이상 억압되었으며, 최소한 10 dB 정도의 백-오프 효과가 있음을 확인하였다. 보상 성능, 구현의 복잡도, 수렴 속도 등을 고려할 때 위너 모델이 제안하는 방식에 가장 적합하다는 결론을 내릴 수 있다.