• 한국지능시스템학회논문지
• /
• 제14권3호
• /
• pp.375-382
• /
• 2004

신경회로망을 이용한 XY 테이블의 비선형 보상기법을 제안한다. 제안된 신경망 제어기는 시스템의 비선형 성분에 의한 성능저하를 보상하는 신경회로망과 시스템의 안정화를 위한 비례미분(PD) 제어기로 구성된다. 신경망 보상 구조가 적응적이고 추적오차와 파라미터 추정치가 유계가 되는 신경망 파라미터 동조알고리듬과 안정도 증명을 제시한다. 신경망 제어기를 위치 테이블에 실험함으로써 비선형 성분에 의한 성능저하를 줄이는 효과를 보여준다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.170-173
• /
• 2001

To apply stereo vision system to obstacle recognition system of AGV, we constructed algorithm of stereo matching and distance measuring with stereo image for positioning of object in area. And using this system, we look into the error between real position and measured position, and studied relationship of compensation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.307-309
• /
• 1993

Robot's kinematic equation is not perfect. In this paper, a method for reducing the positioning error which comes from the imperfect robot kinematics is introduced. This method compensates the parameter of the kinematic equation using real positioning error. And the trajectories using these compensated parameterare compared with uncompensated ones.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.889-897
• /
• 2016

This paper presents an improved approach for compensating rotor position signal displacement in brushless DC (BLDC) motors with misaligned hall-effect sensors. Typically, the hall-effect sensors in BLDC motors are located in each phase and positioned exactly 120 electrical degrees apart. However, limitations in mechanical tolerances make it difficult to place hall-effect sensors at the correct location. In this paper, a position error compensator to counteract the hall-effect sensor positioning error is proposed. The proposed position error compensator uses least squares error analysis to adjust the relative position error and back-EMF information to reduce the absolute offset error. The effectiveness of the proposed approach is verified through several experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.288-291
• /
• 2001

This paper present effective odometry error compensation using multisensor fusion for the accurate positioning of mobile robot in navigation. During obstacle avoidance and wall following of mobile robot, position estimates obtained by odometry become unrealistic and useless because of its accumulated errors. To measure the position and heading direction of mobile robot accurately, odometry sensor a gyroscope and an azimuth sensor are mounted on mobile robot and Complementary-filter is designed and implemented in order to compensate complementary drawback of each sensor and fuse their information. The experimental results show that the multisensor fusion system is more accurate than odometry only in estimation of the position and direction of mobile robot.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.367-372
• /
• 2000

Accuracy of a machined component is determined by the relative motion between the cutting tool and the workpiece. One of the important factors which affects the accuracy of this relative motion is the geometric error of machine tools. In this study, geometric error is modeled using form shaping motion of machine tool, where a form shaping function is derived from the homogeneous transformation matrix. Geometric errors are measured by laser interferometer. After that, the local positioning error can be estimated from the form shaping model and geometric error data base. From this information, we can remodel the part by shifting the design surface to the amount of positional error. By generating tool path to the redesigned surface, we can reduce the machining error.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.244-247
• /
• 2002

The performance of the precision micro-positioning 4-dof stage is presented. The compact design utilizes the monolithic mechanism to achieve the translation in the Z axis and rotation in the $\theta$ z, $\theta$ x and $\theta$ y axes with high stiffness and high damping. Hysteresis, nonlinearity, and drift of the piezoelectric effects are improved by incorporating the sensors in a feedback control. Experiments demonstrate that the micro-positioning stage is capable of 2nm resolution over the travel range of 25$\mu\textrm$ m in the Z axis, 0.0l7 $\mu\textrm$ rad resolution over the 170$\mu\textrm$ rad in the $\theta$ z and 0.011 $\mu\textrm$ rad resolution over the $\mu\textrm$ rad in the $\theta$ x and $\theta$ y axes. The cross-axis interferences among the axes are at a noise range. This stage is available for positioning error compensation of the XY stage with large stroke.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권4호
• /
• pp.670-691
• /
• 2013

In RSSI-based RFID(Radio Frequency IDentification) indoor localization system, the signal path loss model of each sub-region is different from others in the whole localization area due to the influence of the multi-path phenomenon and other environmental factors. Therefore, this paper divides the localization area into many sub-regions and constructs separately the signal path loss model of each sub-region. Then an improved LANDMARC method is proposed. Firstly, the deployment principle of RFID readers and tags is presented for constructing localization sub-region. Secondly, the virtual reference tags are introduced to create a virtual signal strength space with RFID readers and real reference tags in every sub-region. Lastly, k nearest neighbor (KNN) algorithm is used to locate the target object and an error compensating algorithm is proposed for correcting localization result. The results in real application show that the new method enhances the positioning accuracy to 18.2% and reduces the time cost to 30% of the original LANDMARC method without additional tags and readers.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
• /
• pp.11-14
• /
• 2007

An additive servo-system is developed to improve straightness of linear motor stages. For linear motor stages used in the field of high-precision linear motion process, high straightness accuracy is necessary as well as positioning accuracy in the longitudinal axis. In such cases, machining and assembling cost increases to improve the straightness accuracy. An electro-magnetic actuator which is relatively cost effective than any other conventional servo-systems is suggested to compensate the fixed straightness error. To overcome the compensation error due to modeling error and friction disturbance, a sliding mode control is addressed. The effectiveness of the suggested mechanism and the control are illustrated along with some experimental results.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권4호
• /
• pp.181-186
• /
• 2015

A High-degree Cubature Kalman Filter (CKF) is proposed to deal with the Strapdown Inertial Navigation System (SDINS) alignment problem. In-flight Alignment (IFA) is an effective method to compensate for attitude errors of the navigation system. While providing precise attitude error compensation, however, the external source aided alignment often creates a nonlinear filtering problem caused by a large misalignment angle. Introduced recently, Cubature Kalman Filter is a suitable technique for various nonlinear problems. In this paper, a higher degree CKF is applied to this accuracy-is-everything SDINS IFA problem. The simulation results show that the proposed technique outperformed a traditional nonlinear filter in terms of precision and alignment time.