• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.417-422
• /
• 2002

One of the major limitations of productivity and quality in metal cutting is the machining accuracy of machine tools. The machining accuracy is affected by geometric errors, thermally-induced errors, and the deterioration of the machine tools. Geometric and thermal errors of machine tools should be measured and compensated to manufacture high quality products. In metal cutting, the machining accuracy is more affected by thermal errors than by geometric errors. In this study, the compensation device and temperature-based algorithm have been implemented on the machining center in order to compensate thermal error of machine tools under the real-time. The thermal errors are predicted using the neural network and multi-regression modeling methods. In order to compensate thermal characteristics under several operating conditions, experiments performed with five gap sensors and manufactured compensation device on the horizontal machining center.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.3 s.22
• /
• pp.56-63
• /
• 2005

The radome boresight error degrades the microwave seeker ability and the missile guidance performance. It increases the miss distance, also. This paper propose a method of radome boresight error measurement and compensation. The compensation method consist of radome analysis and radome compensation. In the radome analysis stage, we can know that the electromagnetic characteristics distorted by radome. In the compensation stage, the look-up table is built and used for compensation. The test uses a FMS(Flight motion simulator) and adjusts the FMS setup error for more accuracy. The result shows that not using an elaborate radome measurement equipment, the radome boresight error is well compensated easily.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.8
• /
• pp.1377-1382
• /
• 2008

DSTATCOM(distribution static compensator) is one of the custom power devices, and protects a distribution line from unbalanced and harmonic current caused by non-linear and unbalanced loads. Researches about DSTATCOM are mainly divided two parts, one is the calculation of compensation current and the other part is the current control. Conventional researches use a LPF(low pass filter) to eliminate ripple component at the calculation of compensation current. But this method has a problem that LPF's characteristics restrict the compensation performance of instantaneous active and reactive power. This paper proposes a calculation of compensation current using state observer that can be a counterproposal of conventional methods using LPF. Improved performance of instantaneous active and reactive power compensation was shown by experiments.

• Land and Housing Review
• /
• v.11 no.4
• /
• pp.75-92
• /
• 2020

This study explores the outcome of the current Land Compensation Act for the indigenous residents of DAEIM Public Development Project Zone in Gyeongsan City. The purpose of the law is to return part of the development gains to the native residents and to support the re-settlement of the native residents. As the Land Compensation Act applies to each area with different standards, the monetary terms of land compensation which the native residents eventually receive varies across the region and development sites. That means the development gain is not fairly shared with the native residents of the redevelopment area and it does not necessarily support the settlement of the existing residents. It is supposed that the actual compensation for the native residents should be in full cash value but it is not in reality. The study demonstrates the outcomes of the land compensation that the residents received are far from the original purpose of the Compensation Act using the case example of DAEIM Public Development Zone in Gyeongsan, Gyeongsangbukdo. Only a small proportion of the natives managed to achieve the development gains. Accordingly the majority of the native residents has lost re-settlement opportunity. It suggests that the Compensation Act and the implementation procedure should be reviewed and revised accordingly. The details of compensation plan should be tested and set up in line with the characteristics of the project area. In particular, the compensation details in terms of the size and types of land, average value of land for indigenous residents receive, and the amount of compensation per household should be clearly demonstrated to the resident.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.4
• /
• pp.263-268
• /
• 2007

It applied the linear tapped delay line structure to the least mean square algorithm and the recursive least square algorithm it investigated the mean square error characteristics of compensation algorithm. The purpose of this paper is to propose multi-tap update algorithm, which is superior to compensation capacity of data, and then compare and analyze it from the perspective of convergence characteristics at time invariant transmission channel and frequency selective fading channel.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.261-261
• /
• 2000

This paper analyzes the characteristics of pre-sliding friction of an X-Y table of CNC machining center at velocity reversal, and presents a simple and effective method of friction compensation based on this characteristics. At velocity reversal, a large position tracking error occurs because of the discontinuous change of friction. The relationship between the occurrence time of maximum position tracking error and the acceleration at zero velocity is analyzed by using the spring-like friction model. Furthermore, the experimental observation verifies this relation. From this, the state transition tine from pre-sliding regime into sliding regime can be predicted. Using the predicted transition time, the friction can be effectively compensated and table experimental results show its effectiveness.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.3
• /
• pp.211-218
• /
• 2000

The performance and dynamic characteristics of three-phase active power filter with PCC voltage compensation is presented and analyzed in this paper. The characteristics of parallel active filter are discussed when they are applied to nonlinear loads with current source and voltage source type, the characteristics of voltage compensator and comparison of two functions are discussed. The proposed scheme in this paper employs a PWM voltage-source inverter and has two operation modes. First, it operates as a conventional active filter with reactive power compensation while PCC voltage is in a certain range. Second, is operates as a voltage compensator while PCC voltage is out of range. Finally, the validity of this scheme is investigated through analysis of simulation and experimental results for a prototype active power filter system rated at 10KVA.

• Industry Promotion Research
• /
• v.5 no.3
• /
• pp.37-44
• /
• 2020

Currently, the delayed compensation system, which does not reflect the R&D characteristics of the defense industry, is being applied, causing problems such as worsening management of defense companies and delayed power generation. The purpose of this study is to contribute to the development of the defense industry and the efficient promotion of combat capability by studying the improvement plan of the delayed compensation system reflecting the R&D characteristics of the defense industry. The research analyzed the defense industry R&D characteristics, national R&D, delayed compensation rate, reduction and exemption procedures and existing studies. Further, the Delphi technique was applied based on the status of the delayed compensation and the analysis of the cause of delay. It has been studied that it is not appropriate to apply the 'manufacturing and purchasing' standard of commercial products to defense industry R&D where the latest technology is applied and the success is unclear. Four measures were drawn to prevent delays, including the selection of excellent technology companies, and three measures to reduce delay compensation and apply differentials for rational treatment in case of delays. Just as the defense industry R&D is carried out under the Defense Acquisition Program Act due to the nature of the R&D industry, the defense industry will develop if the delayed compensation system is improved to reflect the R&D characteristics of the defense industry, and it will contribute to the acquisition of an efficient and economic weapons system.

• Journal of the Optical Society of Korea
• /
• v.10 no.3
• /
• pp.112-117
• /
• 2006

We experimentally investigated the transmission characteristics of 400 Gbit/s (10 Gbit/s ${\times}$ 40 channels) WDM signals with 100 GHz channel spacing over 323 km of installed NZ_DSF. The installed fiber has optical properties of 0.28 dB/km attenuation, 4.3 ps/nm/km dispersion, $0.083ps/nm^2/km$ dispersion slope and less than $0.05ps/km^{1/2}$ PMD coefficient. In this experiment, two cases of dispersion compensation schemes, the lumped type and the distributed type, were compared. The results implied that the distributed type dispersion compensation in which dispersion compensation devices are inserted at the end of the each span showed better transmission performance than the lumped one in which dispersion compensation devices are located at the transmitter and receiver sites. From the analysis of the experimental results, we verified that different transmission performance comes from the power penalty induced by XPM in the distributed scheme is lower than the lumped scheme case.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.453-457
• /
• 2001

One of the major limitations of productivity and quality in metal cutting is the machining accuracy of machine tools. The machining accuracy is affected by geometric and thermal errors of the machine tools. In this study, the compensation device is manufactured in order to compensate thermal error of machine tools under the real-time. This paper models of the thermal errors for error analysis and develops on-the-machine measurement system by which the volumetric error are measured and compensated. The thermal error is modeled by means of angularity errors of a column and thermal drift error of the spindle unit which are measured by the touch probe unit with a star type styluses, a designed spherical ball artifact, and five gap sensors. In order to compensate thermal characteristics under several operating conditions, experiments performed with five gap sensors and manufactured compensation device on the horizontal machining center.