• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.1
• /
• pp.126-136
• /
• 1992

In this paper, a simple structured feedback compensation scheme for a electro-hydraulic servo system to keep the response characteristics unchanged regardless of the load variation is proposed. In electro-hydraulic servo system, servovalve is most important control element. But the relation between input corrent and output flowrate of the servovalve has properties as follows; firstly, in spite of constant input current, output flowrate decreases as load pressure increases, secondly, according to frequency response of typical servovalve, the characteristics of gain and phase shift is something like 2'nd order system. Load pressure feedback compensation method has been applied to eliminate the first influence, the second influence has been improved by phase lead compensation method. As a result of above compensation methods, regardless of variation load condition, spring and inertia load, the compensation scheme has been verified to be effective within the range of frequency less than 25Hz by static response and dynamic response in time domain and frequency domain through experiments.

• Journal of Power Electronics
• /
• v.10 no.6
• /
• pp.749-761
• /
• 2010

The switching frequency of a power device is a very important parameter in the design of a parallel active power filter (PAPF), but so far, very little discussion has been conducted on it in a quantitative manner in previous publications. In this paper, an extensive analysis on the effects of the switching frequency on the performance of a PAPF is made, and a specification of the switching frequency values with different compensation results is presented. A first-order inertia element and a second-order oscillation element are considered as approximate models of a PAPF, respectively. The compensation characteristic for each order of harmonic current is obtained at different switching frequencies. Then, the THDs of each model for the system loads of a rectifier with resistance and inductance loads are proposed. The compensation results of a PAPF controlled as a first-order inertia element are better than those of a PAPF controlled as a second-order oscillation element. With two types of system loads which are rectifier with resistance and inductance loads and rectifier with resistance, inductance and capacitance loads, the THDs of the source current after compensation are presented with different switching frequencies. The compensation characteristics for the most widely used digital control system are investigated. The situation with an analog control is the theoretical characteristic and it is the best situation. The compensation characteristic of the digital control is worse than the compensation characteristic of the theoretical characteristic. Based on these analyses, the specifications of compensation characteristics with different switching frequencies are quite straightforward. Finally, a practical design example is studied to verify the application.

• Journal of Industrial Technology
• /
• v.25 no.B
• /
• pp.183-188
• /
• 2005

Instead of the incandescent lamps the LED lamps have been used on the traffic signal lamp with the advantages of small loss, no lens and long life. In this paper, we have compared three kinds of the LED controller structures and showed the LED array decision methods. We studied the temperature characteristics on LED and the temperature compensation network. The experimental results showed that the electrical characteristics of three kinds of the LED controller structures were different each other. We concluded that the temperature compensation is the important technique, the best compensation network has the ${\pm}10%$ variation for the luminous intensity.

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1654-1663
• /
• 2015

Compared to LC resonance, LCL resonance has distinct advantages such as a large resonant capability, low voltage and current stresses of the power device, constant voltage or current output characteristics, and fault-tolerance capability. Thus, LCL resonant compensation is employed for a movable Inductive Contactless Power Transfer (ICPT) system with a multi-load in this paper, which achieves constant current output characteristics. Peculiarly, the primary side adopts a much larger compensation inductor than the primary leakage inductor to lower the reactive power, reduce the input current ripple, generate a large current in the primary side, and realize soft-switching. Furthermore, this paper proposes an approximate resonant point for large inductor-ratio LCL resonant compensation through fundamental wave analysis. In addition, the PWM control strategy is used for this system to achieve constant current output characteristics. Finally, an experimental platform is built, whose secondary E-Type coils can ride and move on a primary rail. Simulations and experiments are conducted to verify the effectiveness and accuracy of both the theory and the design method.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.310-312
• /
• 1989

From the viewpoint of an effective energy use, many method for reactive power compensation has been developed. Among of the reactive power compensation, this paper describes the relation of operation interpretation, filter, hysteresis width and switching time of current controlled PWM converter which has excellent reactive power compensation. This current controlled PWM convertor is excellent the view of reactive power compensation by current control method using hysteresis comparator method, but is required element of high response characteristics. Therefore this paper offers the series of data for system considering switching characteristics of switching element.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.1
• /
• pp.67-79
• /
• 1996

This paper presents a composite luminance signal processing system for NTSC, PAL and SECAM standards. Eaxh of the three standards employs its own specifications of subcarmier bandwidth and luminance signal waveform. The proposed system, compatible to the specifications of the three standard and B/W TV, implements variable freqneucy characteristics by controlling filter coefficients. The major features of the system are a luminance/chroma separation unit and an aperture compensation unit. The luminance/chroma separation unit employes a notch filter selection a trap freqneyc to atenuate unwanted color signals in luminance signal bands. The aperture compensation unit comprises two subunits, to provide clear color definition for each of the three standards: a primary compensation circuit and a variable compensation circuits. The proposed system yields a 40 dB gain from the chroma/luminance separation and a 10 dB gain from the aperture compensation unit.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1401-1404
• /
• 2008

Temperature Compensation Method of Local Dimming LED Backlight System is proposed. The luminance levels of the LED backlight are not stable over temperature and time due to the inherent characteristics of the LED. The characteristics of LED backlight are investigated and a temperature compensation method is presented. The image distortion caused by temperature variation of LED block can be effectively compensated by the proposed temperature compensation method.

• Korea Trade Review
• /
• v.44 no.4
• /
• pp.129-151
• /
• 2019

The purpose of this study is to determine the Mediating Effects of Job Engagement between Perception in Compensation and Innovation Behavior in Chinese Enterprise Workers. The empirical study was conducted by a questionnaire survey on 700 workers in companies located in the southern area of China. The statistical analysis results revealed the following. First, the perception in compensation of Chinese workers has significant positive effects on the innovation behaviors. And intrinsic compensation has more relative significant effects than extrinsic compensation. Second, the perception in compensation has significant positive effects on the job engagement. In this case, extrinsic compensation has more relative significant effects than intrinsic compensation does. Third, job engagement of workers has significant positive effects on the innovation behaviors. Fourth, job engagement has mediating effects between perception in compensation and innovation behaviors. In conclusion, for the sustainable growth and competitive advantage of Chinese enterprises, it is important to perceive the needs of extrinsic and intrinsic perception in compensation of workers, and to design suitable compensation policies and programs to promote innovation behaviors and job engagement considering the distribution and procedural justice, and also to reflect the needs and job characteristics of workers.

• Journal of Technology Innovation
• /
• v.12 no.2
• /
• pp.227-245
• /
• 2004

Studies on compensation structures of international technology licensing show that the level of intellectual property protection in the host market and the favorableness of the host country's economic environment are positively related to the use of running royalty-based compensation structure. Lump-sum fee or fixed royalty compensation is more likely to be used in the introduction and decline stages of the technology life cycle, and running royalty compensation in the growth stage. The international experience and the size of the licensor company are positively related to the use of running royalty. In this theoretical context, this paper analyzes the choice of compensation structures in Korean technology imports. The paper uses the officially reported data to analyze the compensation structures. It analyzes the characteristics of the compensation structures in terms of fixed royalty and running royalty by licensor country, group of licensor countries and size of licensee companies.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.1
• /
• pp.23-28
• /
• 1998

A linearly-chirped fiber grating for the dispersion compensation over 520km of 1.3.mu.m single mode fiber is designed. The compensation characteristics of the gratings apodized each with Gaussian and hyperbolic tangent function are studied. the ripples in reflection and delay curves are coniderably reduced for both cases, but the reflection bandwidth for the hyperbolic tangent apodization is much less shrinked than that of the Gaussian apodization.