• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.1
• /
• pp.13-23
• /
• 2015

Recently, a few image-processing based mobile urine testers have actively been studied since the urine-analysis result can be available to the user in real time immediately after the test is done. However, the accuracy of test result can be severely degraded due to variable illumination environments and a variety of manners to capture the image with a camera embedded in the smartphone according to different users. This paper proposes the Check4Urine system, a novel smartphone-based portable urine-analysis tester and provides three techniques to improve such a performance degradation problem robust to various test environments and disturbances, which are the compensation algorithm to correct the varying illumination effect, an urine strip detection algorithm robust to edge loss of the object image, and the color decision algorithm based on the pre-processed reference table. Experimental results show that the proposed Check4Urine system increases the accuracy of urine-analysis by 20-50% at various test conditions, compared with the existing image-processing based mobile urine tester.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.6A
• /
• pp.965-979
• /
• 2001

본 논문에서는 OFDM 시스템의 송신기에서 사용되는 선형 필터와 고출력 증폭기의 결합에 의한 \"기억성을 갖는 비선형 왜곡\"을 실제 하드웨어 구현에 적합하게 적은 계산량으로 보상할 수 있는 참조 테이블(look up table; LUT) 기반의 사전왜곡기를 제안한다. LUT를 이용하는 사전왜곡기들은 이미 많이 연구되었으나, 본 논문에서는 다중 입력/단일 출력 형태의 기억성을 갖는 비선형 왜곡을 작은 크기의 LUT를 이용하여 효율적으로 보상한다는 점에서 큰 차이가 있다. 제안 방법에서는 먼저 기억성이 없는 고출력 증폭기만이 존재할 때의 사전왜곡기를 우리가 이미 제안한 고정점 반복 사전왜곡기 알고리즘에 기반하여 LUT로 구현하고, 여기에 선형 역 시스템을 결합하여 기억성을 갖는 비선형 왜곡을 보상한다. 실제 구현 가능성 검토를 위해 제안된 사전왜곡기와 16-QAM, 256-IFFT/FFT OFDM 시스템 기저대역 모뎀을 TMS320C30 DSP를 이용하여 구현하였으며, 실험 결과 작은 크기의 LUT를 이용하여도 원래의 고정점 반복 사전왜곡기에 비해 매우 적은 계산량을 요구하면서 동일한 성능을 얻을 수 있음을 확인하였다.있음을 확인하였다.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.7
• /
• pp.70-82
• /
• 1993

In this paper, employing the 3-dimensional discrete cosine transform (DCT) for the utilization of the temporal correlation, an adaptive motion sequence coding technique is proposed. The energy distribution in a 3-D DCT block, due to the nonstationary nature of the image data, varies along the veritical, horizontal and temporal directions. Thus, aiming an adaptive system to local variations, adaptive procedures, such as the 3-D classification, the classified linear scanning technique and the VLC table selection scheme, have been implemented in our approach. Also, a hybrid structure which adaptively combines inter-frame coding is presented, and it is found that the adaptive hybrid frame coding technique shows a significant performance gain for a moving sequence which contains a relatively small moving area. Through an intensive computer simulation, it is demonstrated that, the performance of the proposed 3-D transform coding technique shows a close relation with the temporal variation of the sequence to be code. And the proposed technique has the advantages of skipping the computationally complex motion compensation procedure and improving the performance over the 2-D motion compensated transform coding technique for rates in the range of 0.5 ~ 1.0 bpp.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.11
• /
• pp.983-988
• /
• 2015

This paper details a new ultra-precise turning method for increasing surface quality, "Multi Point B Axis Control Method." Machined surface error is minimized by the compensation machining process, but the process leaves residual chip marks and surface roughness. This phenomenon is unavoidable in the diamond turning process using existing machining methods. However, Multi Point B axis control uses a small angle (< $1^{\circ}$) for the unused diamond edge for generation of ultra-fine surfaces; no machining chipping occurs. It is achieved by compensated surface profiling via alignment of the tool radial center on the center of the B axis rotation table. Experimental results show that a diamond turned surface using the Multi Point B axis control method achieved P-V $0.1{\mu}m$ and Ra 1.1nm and these ultra-fine surface qualities are reproducible.

• Economic and Environmental Geology
• /
• v.47 no.3
• /
• pp.237-246
• /
• 2014

In this study, it is estimated how many changes of macroeconomic variables are happened under the proposition of import substitution of mining products 1% using macroeconometric input-output model. For this, used macroeconometric input-output model is composed of 141 behavioral equations representing the macroeconomy structure. In general, macroeconometrics models are constructed mainly on the side of the expenditure then it is not easy to estimate the effects of the shocks occurred from industry level. To mitigate that, this study tries to construct a macroeconometric input-output model. Macroeconometrics model which is useful to estimate the effects of macroeconomic shocks, economic policy and more, in this study, is linked with input-output table through the NDI(national disposable income) derived from compensation of employee. And this paper presents the estimation results of import substitution effects of mining products on Korean economy. As a results, GDP is increased 0.00073%, gross labor employed 0.00029%, current balanace 0.00010% and unemployment rate is mitigated 0.00233%.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.5
• /
• pp.62-70
• /
• 2007

In this paper, the boost Power Factor Correction(PFC) technique for Direct Torque Control(DTC) of brushless DC motor drive in the constant torque region is implemented on a TMS320F2812DSP. Unlike conventional six-step PWM current control, by properly selecting the inverter voltage space vectors of the two-phase conduction mode from a simple look-up table at a predefined sampling time, the desired quasi-square wave current is obtained, therefore a much faster torque response is achieved compared to conventional current control. Furthermore, to eliminate the low-frequency torque oscillations caused by the non-ideal trapezoidal shape of the actual back-EMF waveform of the BLDC motor, a pre-stored back-EMF versus position look-up table is designed. The duty cycle of the boost converter is determined by a control algorithm based on the input voltage, output voltage which is the dc-link of the BLDC motor drive, and inductor current using average current control method with input voltage feed-forward compensation during each sampling period of the drive system. With the emergence of high-speed digital signal processors(DSPs), both PFC and simple DTC algorithms can be executed during a single sampling period of the BLDC motor drive. In the proposed method, since no PWM algorithm is required for DTC or BLDC motor drive, only one PWM output for the boost converter with 80 kHz switching frequency is used in a TMS320F2812 DSP. The validity and effectiveness of the proposed DTC of BLDC motor drive scheme with PFC are verified through the experimental results. The test results verify that the proposed PFC for DTC of BLDC motor drive improves power factor considerably from 0.77 to as close as 0.9997 with and without load conditions.

• East Asian mathematical journal
• /
• v.31 no.4
• /
• pp.505-525
• /
• 2015

The purpose of this study is to analyze teaching method of addition and subtraction of whole number in Korea and New Zealand lower grade textbook and to get some suggestive points to develop mathematics curriculum and for a qualitative improvement of textbook. To do this, we will analyze focusing on teaching material, type and method of teaching, cases of real teaching and in the case of New Zealand, we will analyze portfolios together to see what kind of things do they deal with related to addition and subtraction. From these analyzing, the results are as follows: First, the guideline of accomplishment of group of year are stated in 2009 revised curriculum in Korea but it is rough. On the other hand, the level of accomplishment from kindergarten to high school are stated divided by eight kinds of thing in New Zealand curriculum. Second, there were common and different points in the aspect of teaching material. The common points are that both of our Korea and New Zealand are using materials related to real life intimately and the diifferent points are to use technology such as calculator and computer. They are more widely used in New Zealand than our Korea. Third, Korea had used routine method mainly but New Zealand had used method to develop creativity of learner such as to write problem corresponding to expression, posing problem corresponding to information, to complete table and find pattern and to write word problem to explain pattern and so on. Fourth, we could see special calculation strategies in the case of teaching addition and subtraction such as concept of double, compensation, various strategy based on counting of number, addition of the same number, magic square, near-double which are not finding in our mathematics textbook. Fifth, in the New Zealand textbook they had used teaching methods inducing curiosity of learner such as finding message and puzzle problem than solving given problem simply.

• Journal of Fashion Business
• /
• v.19 no.4
• /
• pp.37-56
• /
• 2015

This thesis aimed to determine the effecting factors(eating pattern, working condition, stress, health care) that help maintain the health of the cosmetologists' digestive system and the diseases involved (acid reflux, indigestion, gastritis, constipation & diarrhea). The research methods included survey and statistical analysis. The survey was conducted on 242 cosmetologists from August 30 to October 30 2014. The data analysis included frequency, cross table, ${\chi}^2$-test, and regression with SPSS(V. 14). The results were as follows ; (1) The cosmetologists' health of digestive system and eating pattern are related. Regular and enough meal times cause less digestive disease. Acid reflux, indigestion, gastritis, constipation and diarrhea are differently related with the type of usual eating pattern, especially, instant food is not good for digestive health. (2) The cosmetologists' health of digestive system and working condition are related. Longer daily working hours and exposure time to chemical odors are more likely to be associated with digestive diseases; whereas, longer time of standing and talking with colleagues are less likely to be associated with digestive diseases. (3) The cosmetologists' health of digestive system and stress are related. Headache, boredom, conflict of pay and compensation, and insomnia are not good for digestive health. (4) The cosmetologists' health of digestive system and health care are related. Periodical medical examination and usual body stretching are correlated with digestive diseases; whereas, people who do regular exercise and bowel movement are less likely to have digestive diseases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1734-1745
• /
• 1996

In this paper, a modified fixed-delay tree search with decision feedback(FDTS/DF) for compensation of non-linear distortion in digital magnetic recording channels is discussed. Since the nonlinear distortion, which becomes significant as recording density increases, is generally well modeled by the discrete Volterra series, the proposed equlizer is composed of a nolinear feedforward filter, a linear feedback filter, and a nonlinear distorton table, the values of which are determined by considering the effect of nonlinear distortion due to future data as well as the previous and current one. At the decision stage of FDTS, a path minimizing the branch metric is chosen by using the previously detected values, current predicted value, and future predicted value. We compare the performance of the linear FDTS/DF, the previous nonlinear FDTS/DF, and the proposed nonlinear FDTS/DF by computer simulation, and confirm that the proposed one chieves the best performance at high-density recording.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.6
• /
• pp.630-636
• /
• 2019

Passive Ranging Sonar (PRS) is a type of passive sonar consisting of three sub-array on the port and starboard, and has a characteristic of detecting a target and calculating a bearing and a distance. The bearing and distance calculation requires physical sub-array position information, and the bearing and distance accuracy performance are deteriorated when the position information of the sub-array is inaccurate. In particular, it has a greater impact on distance accuracy performance using plus value of two time-delay than a bearing using average value of two time-delay. In order to improve this, a study on sub-array position error estimation and error compensation is needed. In this paper, We estimate the sub-array position error based on enetic algorithm, an optimization search technique, and propose a method to improve the performance of distance accuracy by compensating the time delay error caused by the position error. In addition, we will verify the proposed algorithm and its performance using the sea-going data.