• Title/Summary/Keyword: Compensation System

Search Result 3,250, Processing Time 0.035 seconds

The study on the depreciated compensation system for residual land (잔여지 감가보상에 관한 연구)

  • Park, Yong-Han
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.8 no.2
    • /
    • pp.307-312
    • /
    • 2013
  • The compensation system for residual land in our country is largely composed of the three sub-systems, that is, the purchasing compensation, depreciated compensation and construction expenses compensation. Among those, the purchasing compensation system mainly has problems in eligibility for compensation of the land, meanwhile, there is almost no problem in construction expenses compensation system. This study aims to examine the current depreciated compensation system for the residual land and its accompanying problems, and also review and compare those systems in USA and Japan with that of our country, and thereby discover the ways for the alternative solution for the compensation system in the viewpoint of policy.

A Study on the Legal System of Compensation for Fishery Loss caused by Public Works (우리나라 어업손실 보상제도에 대한 정선방안 연구;-법제도를 중심으로-)

  • 이원갑
    • The Journal of Fisheries Business Administration
    • /
    • v.25 no.1
    • /
    • pp.19-35
    • /
    • 1994
  • The objective of this study is to analize the system of legal compensation for the fishery loses caused by public works and to suggest alternatives on the current compensation system. Korea government has been performing reclamation activities in coastal region to conduct farm, urban and industrial area, and such activities are still going on in Yeongjongdo airport area, Saemangeum area and so on. Reclamation interrupts fishing activities in or around the reclaiming area, therefore, the compensation for fishery losses incurred by fishermen should be made. The system of legal compensation in Korea, however, is based on the land compensation, and the regulation of the compensation for fishery losses in the Fishery Act can not be applied for the compensation of public works because the procedure of the compensation in the Fishery Act is different from its cause of action. Therefore, this study is caried out to suggest a resonable compensation procedure and to provide a basis for establishing legal system.

  • PDF

Evaluation on Effectiveness of the Compensation System for Reproducing or Interactively Transmitting Works in Libraries (도서관의 저작물 복제.전송 보상금제도 효용성 평가)

  • Hong, Jae-Hyun
    • Journal of Korean Library and Information Science Society
    • /
    • v.42 no.3
    • /
    • pp.351-379
    • /
    • 2011
  • The compensation system for reproducing or interactively transmitting works in libraries has been introduced in 2003. It has passed more than 7 years since this system has been implemented in July 2004. This study investigated current situation of operation on the compensation system for reproducing or interactively transmitting works in libraries. The survey on the effectiveness of the compensation system was conducted to a group of authors and librarians. First, the difference of the effectiveness of the compensation system between a group of authors and librarians was analyzed. In addition, the difference of the effectiveness of the compensation system according to status variable of author group was analyzed. Also the difference of the effectiveness of the compensation system according to status variable of librarian group was analyzed. Finally, this study pointed out the problems of the compensation system and presented the way to improve the problems.

Development of Land Compensation System Based on GIS for the Regional Construction Management Office (지리정보체계 기반의 지방청 용지보상시스템 구축)

  • Seo Myoung-Bae;Kim Nam-Gon;Kang Eui-Seok
    • Korean Journal of Construction Engineering and Management
    • /
    • v.5 no.1 s.17
    • /
    • pp.62-70
    • /
    • 2004
  • The use of private property occurs fatally to achieve public work such as road construction and appropriate compensation for land expropriation must be performed to use private property such as land. Since compensation of land expropriation is complicated and compensation target is various, electronic processing system development for land compensation processing business is required. The land compensation system for Regional Construction Management Office applied geographic information system (GIS) technology to land drawing that becomes basis of compensation business when constructing roads. It can perform the establishment of compensation planning, the understanding of the present state of compensation and the management of compensation business by connecting with land position information on drawings. We also implemented our system so that it can effectively accomplish various kinds of works such as compensation by agreement, expropriation, decision and deposit etc. Development of the land compensation system that can reduce time for processing civil affair administration and decrease costs efficiently to handle land compensation business

The Effects of Compensation System Quality on Compensation System Satisfaction and Work Efforts (보상시스템의 질이 종업원 보상시스템 만족도와 노력투입에 미치는 영향)

  • Shin, Sung-Wook
    • The Journal of the Korea Contents Association
    • /
    • v.9 no.9
    • /
    • pp.313-324
    • /
    • 2009
  • This study purposes to analyze how the level of compensation system qualify(transparency, fairness, controllability) affects the satisfaction of employee concerned with compensation system and work efforts. To test above mentioned objectives, i conduct using the survey data directly survey and e-mail to the MBA students of university located In southeastern korea and analyze using the structural equation model. The results of this paper are as follows. First, the analysis results demonstrate a positive relationship between the level of compensation system qualify and the satisfaction of employee concerned with compensation system. Second, the level of compensation system quality positively affects employee' work efforts. Thirdly, the satisfaction of employee concerned with compensation system also positive effects on work effort. The above results mean that if the level of compensation system quality is higher, employee are satisfied with the compensation system, and increase the level of work effort.

Active/Reactive Compound Compensation in Distribution System

  • Sul, Yong-Tae
    • Journal of Electrical Engineering and information Science
    • /
    • v.2 no.4
    • /
    • pp.46-52
    • /
    • 1997
  • In this paper th use of compensation based on a combination of active plus reactive power at distribution model system is proposed. The basic voltage-power relationships for the linearized case on an infinite bus are used and the compensation angle is defined based on the voltage magnitude response to small power injection. Compensation is supplied at several locations, and the system is subjected to varying fault scenarios, with its response observed under different system conditions. As number of control issues for a storage-based active/reactive power compensator as a bus voltage regulator are explored to compare the effectiveness of active/reactive again reactive-only compensation.

  • PDF

Development of Voltage Controlled Power Factor Compensation System using Slidac (슬라이닥을 이용하는 전압 제어 방식의 역률보상시스템 개발)

  • Joung, Sanghyun;Lee, Hyun-woo;Park, Young-kyun;Park, Chul-woo
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.54 no.8
    • /
    • pp.115-122
    • /
    • 2017
  • In this paper, we propose a novel power factor compensation system using slidac. The proposed power factor compensation system compensates the power factor by adjusting the output voltage of the slidac. In the conventional power factor compensation system using capacitor bank method, the power factor compensation error occurs depending on the load condition due to the limitation of the compensation capacitor capacity. However, the proposed system can finely change slidac output voltage applied to the capacitor, therefore power factor can be compensated up to 100% without error. We compare the proposed system with the conventional system, and confirm that the proposed system has excellent power factor compensation performance through simulations and experiments. If the proposed power factor compensation system is applied to an industrial field, a power factor compensation performance can be maximized. As a result, it is possible to reduce of electricity prices, reduce of line loss, increase of load capacity, ensure the transmission margin capacity, and reduce the amount of power generation.

A Study on Current Harmonics Reduction and Unbalanced Source Voltage Compensation Using Series Active Power Filter and Parallel Passive Filter (직렬 능동전력필터와 병렬 수동필터를 이용한 고조파 전류 저감 및 불평형 전원 전압 보상에 관한 연구)

  • Oh, Jae-Hoon;Ko, Su-Hyun;Han, Yoon-Seok;Kim, Young-Seok
    • Proceedings of the KIEE Conference
    • /
    • 2001.10a
    • /
    • pp.196-199
    • /
    • 2001
  • This paper deals with current harmonics and unbalanced source voltages compensation using combined filter system. Filter system consists of a series active filter and parallel passive filters. Passive filters were a traditional method to compensate current harmonics, so those were installed in power system widely. The active filter can be a substitution to improve filtering characteristics and complement drawbacks of the passive filter. The combined system of the active power filter and passive filter can has a better compensation performances and economical goods. The series type active power filter injects compensation voltage into power system by transformers. It's compensation principle is able to applicate for voltage compensation. A new control algorithm for series active filter to compensate current harmonics and unbalanced source voltages is proposed. In the proposed algorithm, a compensation voltage for harmonic reduction is calculated directly by instantaneous reactive power theory, and a compensation voltage for unbalanced source voltage is calculated in based on a synchronous reference frame. By experiments, we show validity of proposed compensation method.

  • PDF

An Uncertainty Analysis of a Compensation Method for the Positioning Error of Three-DOF Manipulator (3 자유도 위치 결정 기구의 위치 오차 평가 및 보정법에 대한 불확도 분석)

  • Park Jae-Jun;Eom Hyung-Wook;Cho Nahm-Gyoo
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.23 no.7 s.184
    • /
    • pp.51-58
    • /
    • 2006
  • This study analyzes the uncertainty of the compensation method of a sensing error of three-DOF measuring system. This compensation method utilizes a reference coordinate system using a three point by moving a position of an endpoint of a three-DOF manipulator. The coordinate transformation between the three-DOF manipulator and the measuring system is identified by the reference coordinate system. According to the concept of this compensation method, each positioning error at any position of the end-point of the manipulator is derived. Uncertainty analyses of the compensation values on the basis of sensitivity analysis and Monte Carlo simulation are used to investigate a feasibility and effectiveness of the compensation method.

Development of an Automatic Tool Compensation System in NC Lathe Machine (NC 선반가공에서 자동공구보정시스템의 개발)

  • Ju, Sang-Yoon;Kang, Byeung-Phil
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.16 no.11
    • /
    • pp.47-54
    • /
    • 1999
  • Tool wear is one of major causes occurring defectives in NC machining. In this paper we developed an automatic tool compensation system for the NC lathe machining. The system compensates machining error without any help of operators whenever the specification of a part is out of a tolerance. The configuration of the automatic compensation system consists of a NC lathe, an autoloader, a sensor, and a PLC. The system is operated as follows. A workpiece loaded by the autoloader is machining on the NC lathe. Once the workpiece is machined to be turned to a part, it is moved onto the sensor to be measured. If the sensor detects a part out of tolerance, a tool compensation is made in the NC controller. The system gives a help in increasing the productivity by reducing occurrence of defective parts as well as by eliminating time for the tool compensation. Besides the productivity increase, the system calculates cumulative usage time of the tool and notices the tool replace time to a worker by an alarm signal. A case is introduced to show that the system can be applied effectively in a shop.

  • PDF