• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.199-206
• /
• 2017

Environmental noise can degrade the performance of speech recognition system. This paper presents a procedure for performing cepstrum based feature compensation to make recognition system robust to noise. The approach is based on direct compensation of spectral tilt to remove effects of additive noise. The noise compensation scheme operates in the cepstral domain by means of calculating spectral tilt of the log power spectrum. Spectral compensation is applied in combination with SNR-dependent cepstral mean compensation. Experimental results, in the presence of white Gaussian noise, subway noise and car noise, show that the proposed compensation method achieves substantial improvements in recognition accuracy at various SNR's.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.12 s.177
• /
• pp.51-60
• /
• 2005

This paper describes a robust control scheme for high-speed and long stroke scanning motion of high precision linear motor system consisting of linear motor, air bearing guide and position measurement system using heterodyne interferometer. Nowadays, semiconductor process and inspection of wafer or LCD need high speed and long travel length for their high throughput and extremely small velocity fluctuations or tracking errors. In order to satisfy these conditions, linear motor system are widely used because they have large thrust force and do not need motion conversion mechanisms such as ball screw, rack & pinion or capstan with which the system are burdened. However linear motors have a problem called force ripple. Force ripple deteriorates the tracking performances and makes periodic position errors. So, force ripple must be compensated. To maximize the tracking performance of linear motor system, we propose the control scheme which is composed of a robust control method, Time Delay Controller (TDC) and a feedforward control method, Zero Phase Error Tracking Control (ZPETC) for accurate tracking a given trajectory and an adaptive force ripple compensation (AFC) algorithm fur estimating and compensating force ripple. The adaptive ripple compensation is continuously refined on the basis of tracking error. Computer simulation results based on modeled parameters verify the effectiveness of the proposed control scheme for high-speed, long stroke and high precision scanning motion and show that the proposed control scheme can achieve a sup error tracking performance in comparison to conventional TDC control.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.341-346
• /
• 2009

M-WiMAX (Mobile-Worldwide Interoperability for Microwave Access) system, which uses OFDM (Orthogonal Frequency Division Multiplexing) technique, is known to be proper for mobile high-speed data transmission system. Nevertheless, M-WiMAX is seriously sensitive to IQ imbalance caused by the LO (Local Oscillator) at the receiver. In this paper, we analyze the effect of IQ imbalance on the system, and then propose a joint optimization scheme that can optimize DFE (Digital Front-end) of mobile modem by combining operation duplicated between AGC (Automatic Gain Control) and the estimation and compensation of IQ imbalance. Simulation results show that the proposed scheme achieves the same performance of the conventional scheme while reducing the complexity of the H/W implementation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.55-64
• /
• 2010

In this paper, we propose a new compensation scheme for combined channel distortions and RF impairments based on the analysis of the impacts of IQ(In-phase/Quadrature) imbalance and phase noise on the OFDM(Orthogonal Frequency Division Multiplexing) system in the direct conversion transceiver and frequency selective fading channel distortion. The proposed scheme estimates the combined distortion by the use of training symbols and the residual distortion by pilot symbols and compensates the combined distortion, including IQ imbalance, phase noise and multipath fading at the same time. The simulation results show that the proposed scheme compensates the combined distortion of IQ imbalance, phase noise and multipath fading simultaneously.

• Journal of Korea Multimedia Society
• /
• v.20 no.5
• /
• pp.731-739
• /
• 2017

Distributed compressed video sensing (DCVS) is a framework that integrates both compressed sensing and distributed video coding characteristics to achieve a low complexity video sampling. In DCVS schemes, motion estimation & motion compensation is employed at the decoder side, similarly to distributed video coding (DVC), for a low-complex encoder. However, since a simple BCS-SPL algorithm is applied to a residual arising from motion estimation and compensation in conventional MC-BCS-SPL (motion compensated block compressed sensing with smoothed projected Landweber) scheme, the reconstructed visual qualities are severly degraded in Wyner-Ziv (WZ) frames. Furthermore, the scheme takes lots of iteration to reconstruct WZ frames. In this paper, the conventional MC-BCS-SPL algorithm is improved to be operated in more effective way in WZ frames. That is, first, the proposed algorithm calculates a correlation coefficient between two reference key frames and, then, by selecting adaptively the reference frame, the residual reconstruction in pixel domain is performed to the conventional BCS-SPL scheme. Experimental results show that the proposed algorithm achieves significantly better visual qualities than conventional MC-BCS-SPL algorithm, while resulting in the significant reduction of the decoding time.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.341-344
• /
• 1997

This paper suggests the modified delay compensation scheme under the control input saturation in order to improve the control performance. This scheme uses the real estimated control input instead of the direct command control input. The simulation results show that this scheme can improve the current control performance under the delay time and the limited control input.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.261-266
• /
• 1998

In this study, the in-situ parameter identification method for active magnetic bearing (AMB) actuator based on an open-loop balancing scheme is proposed. The scheme utilizes the relation between the compensating voltage and the known unbalance force. Main advantage of this method is that it is easy to use, yet it gives the actuator dynamics on the actual operating condition of an AMB system. The experimental results show that the proposed scheme compensates the known unbalance accurately and consequently identifies the actuator dynamics effectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.32-35
• /
• 1987

An adaptive control scheme has been recognized as an effective approach for a robot manipulator to track a desired trajectory in spite of the presence of nonlinearties and parameter uncertainties in robot dynamic models. In this paper, an adaptive control scheme for a robot manipulator is proposed to design the self-tuning controller which combines the pole placement with the extended linearized perturbation model. And this control scheme has two components: a feadforward control and a feedback compensation control. Based on this, the controller is demonstrated by the simulation about position control of a three-link manipulator with payload and parameter uncertainty.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.195-198
• /
• 1997

This paper proposes the effective compensation method of the rotor time constant of induction motor. An indirect vector control method is highly dependent on the motor parameters. To solve the problem of performance degradation due to parameter variation in an indirect vector control of induction motor, we compensate the rotor time constant by current error feedback. The proposed method is a simple on-line rotor time constant compensation method using the information from terminal voltages and currents. As the current error, difference between current command and estimated current, approaches to zero, the value of rotor time constant in an indirect vector controller follows the real value of induction motor. This scheme is valid transient region as well as steady state region regardless of low or high speed. This method is verified by computer simulation. For this, we constructed the simulation model of induction motor, indirect vector controller and current regulated PWM (CRPWM) voltage source inverter (VSI) using SIMULINK in MATLAB.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.1
• /
• pp.98-107
• /
• 1996

The use of composite hyperpatch model is proposed to predict a machine tool positional error over the entire work space. This is an appropriate representation of the distorted work space. This model is valid for any configuration of 3-axis machine tool. Tool position, which is given NC data or CL data, contains error vector in actual work space. In this study, off-line compensation scheme was investigated for tool position error due to inaccuracy in machine tool structure. The error vector in actual work space is corrected by the error model using Newton-Raphson method. The proposed error compensation method shows the possibility of improving machine accuracy at a low cost.