• 한국경영과학회지
• /
• 제38권2호
• /
• pp.179-196
• /
• 2013

This paper examines the difference in compensation structure between family firms and non-family firms in Korea. A manager's compensation is an important means of motivating a manager to make decisions for shareholders by mitigating conflicts of interest between them. However, the role of a manager's compensation can be weakened in family firms for the following reasons. First, a family member manager has fewer conflicts of interest, compared to a non-family member manager. Second, a family member manager has an intrinsic incentive to increase a firm's value (i.e., family wealth). Finally, a family member manager can monitor non-family member managers more effectively. For the reasons, the agency problem will be less severe in family firms and subsequently the role of compensation will be reduced. The empirical results show that pay-performance sensitivity is smaller in family firms than in non-family firms. The main result is robust to variations such as changes in family ownership, the definition of a family firm, and control variables. Furthermore, this paper compares the pay-performance sensitivity of Chaebol family firms with that of other firms. The result shows that the sensitivity is higher for Chaebol family firms, compared to that in other family firms and non-family firms.

• 한국전자파학회논문지
• /
• 제26권9호
• /
• pp.790-797
• /
• 2015

본 논문에서는 마이크로파용 소프트웨어 기반 폴라 송신기를 구현하고, 경로 간의 동기화를 분석하였다. 폴라 송신기의 위상신호와 진폭신호의 두 경로 간 시간 지연부정합 문제를 해결하기 위해 단순화된 보정알고리즘을 적용하였으며, 보정 전과 보정 후의 두 경로 간 동기화 결과를 비교하였다. 동기화 보정하기 전, 9.3 GHz에서 두 경로 간 지연부정합은 최대 97 nsec가 발생하였으며, 이에 따른 점유대역폭은 12 MHz이었으며, 제안한 보정알고리즘을 적용한 결과, 두 경로 간 동기화를 이루었고, 점유대역폭도 기존의 3.7 MHz로 복원할 수 있음을 확인하였다.

• 한국통신학회논문지
• /
• 제21권1호
• /
• pp.59-66
• /
• 1996

In this paper, we present a new effective algorithm for element failure compensation of Generalized Sidelobe Canceller (GSC). While the GSC is well formulated, little works have been done on array element compensation in the presence of faulty elements. Element failure changes the problem of a linearly equally spaced array into that of an unequally spaced array. Typical research approaches have been directed at using search techniques to optimize unequally spaced arrays. The proposed algorithm matches the linear constraint conditions and the general shape of the desired beam pattern at the expense of an increase of beam-width in the overall main lobe. Numerical results are included to demonstrate the capability of compensation for various situations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.195-198
• /
• 1997

This paper proposes the effective compensation method of the rotor time constant of induction motor. An indirect vector control method is highly dependent on the motor parameters. To solve the problem of performance degradation due to parameter variation in an indirect vector control of induction motor, we compensate the rotor time constant by current error feedback. The proposed method is a simple on-line rotor time constant compensation method using the information from terminal voltages and currents. As the current error, difference between current command and estimated current, approaches to zero, the value of rotor time constant in an indirect vector controller follows the real value of induction motor. This scheme is valid transient region as well as steady state region regardless of low or high speed. This method is verified by computer simulation. For this, we constructed the simulation model of induction motor, indirect vector controller and current regulated PWM (CRPWM) voltage source inverter (VSI) using SIMULINK in MATLAB.

• 대한안전경영과학회지
• /
• 제11권4호
• /
• pp.25-33
• /
• 2009

Since it's first adaptation in Germany in 1884, the industrial accident compensation insurance system has been on the most widely used social security systems, and in was first enforced in Korea in 1964. Today's society has been industrialized and number of business places for workers accident. As the welfare of workers improves in korea, the number of beneficiaries of industrial accident compensation insurance is increasing. Even though such trend is desirable in many respects, there is a growing social problem caused by abnormal insurance claims.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권9호
• /
• pp.434-440
• /
• 2005

This paper describes an optimized Scheme of reactive-power compensation for the low short-circuit-ratio AC system interconnected with the HVDC system. An HVDC system interconnected with tile low SCR AC system is vulnerable to the ac voltage variation, which brings about the commutation failure of the converter. This problem can be solved using optimized compensation of reactive power. In this study, a benchmark system for HVDC system interconnected with low SCR AC system is derived using PSS/E simulation. Then an optimized srheme for reactive power compensation was derived using integer programming. The feasibility of proposed scheme was analyzed through silnulations with PSS/E and PSCAD/EMTDC. The proposed scheme can compensate the reactive power accurately and minimize the number of switching for harmonic filters and shunt reactors.

• 센서학회지
• /
• 제24권4호
• /
• pp.270-273
• /
• 2015

One of the main problems when working the chemical sensor is the lack of repeatability and reproducibility of the sensor response. If the problem is not properly taken into consideration, the stability and reliability of the system using chemical sensors would be decreased. In this paper we analyzed the sensor's drift of short term and proposed a compensation method for reducing the effects of the drift in order to improve the stability and the reliability of the chemical sensor. The sensor drift was analyzed by a trend line graph and CV(coefficient of variation) was used to quantify. And we compensated for the drift by using the internal normalization. As a result it was found that the value of CV was decreased after compensation.

• 대한임베디드공학회논문지
• /
• 제9권1호
• /
• pp.43-52
• /
• 2014

This paper presents a tracking system using images captured from a camera on a moving platform. A camera on an unmanned flying vehicle generally moves and shakes due to external factors such as wind and the ego-motion of the machine itself. This makes it difficult to track a target properly, and sometimes the target cannot be kept in view of the camera. To deal with this problem, we propose a new system for stable tracking of a target under such conditions. The tracking system includes target tracking and 3-axis camera motion compensation. At the same time, we consider the simulation of the motion of flying vehicles for efficient and safe testing. With 3-axis motion compensation, our experimental results show that robustness and stability are improved.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.177-178
• /
• 1998

This paper is a study on compensation for error in estimation of mean pressure according to the change of arterial pressure shape. Because arterial pressure shape affects the mean pressure and blood volume which are important factors for measurement of blood pressure(BP), change of arterial pressure shape cause BP measurement error. In order to solve this problem, we add the compensation function C($\alpha$), depending on arterial pressure shape, to mathematical oscillometric model. Consequently, we could accurately estimate the blood pressure by correcting of the error using compensation function.

• 대한전기학회논문지
• /
• 제38권10호
• /
• pp.805-810
• /
• 1989

This paper presents a method for planning reactive power compensation such as shunt capacitors and reacters so as to maintain bus voltage in acceptable range during steady state operation in power system. The algorithm in this paper decomposes the problem into reactive power planning module for the compensation of bus voltage and load flow module for adjusting the error resulted from the linear approximation. A planning technique is based on linear programming to minimize the amount of added reactive power compensation in each case. Transformer tap settings and generator voltages are adjusted to minimize the compensation. The constraints are the operation limits of the control variables and bus voltages. The result of one sample system is presented to confirm the practical use of the proposed algorithm.