• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.47-53
• /
• 2017

There is a difficulty in preventing drunken driving by enforcing alcohol control on the sea due to the environment of Marine transportation rather than roads. In the previous study, we proposed the algorithm, that was developed to identify the voices changed according to be drunk. Using the developed algorithm, it became possible to know the possibility of drinking by long distance ship operators and crew members. In that method drinking can be measured in real time, no matter how far the distance is, if the interception is through a voice that can be transmitted over a distance, rather than a short distance. When communicating voice using the VTS wireless devices, clipping occurs when that environment is uneven, and the rate of judgment of the possibility of drinking may be lowered. Therefore, in this paper, we proposed an enhanced method to compensate the signal in order to reduce the error rate of the possibility of drinking due to distortion of the speech signal.

• Journal of Korea Multimedia Society
• /
• v.24 no.12
• /
• pp.1589-1597
• /
• 2021

Due to the low output rate and time delay of vehicle's navigation results, the electro-optical tracking system(EOTS) cannot estimate accurate target positions. If an inertial measurement unit(IMU) is additionally mounted into the EOTS and inertial navigation system(INS) is constructed, the high navigation output rate can be obtained. And the time-delay can be compensated by using the augmented Kalman filter. An accurate initial attitude is required in order to have accurate navigation outputs. In this paper, an attitude determination algorithm is proposed using the augmented Kalman filter in order to compensate measurement delay of the EOTS and have accurate initial attitude. The proposed initial attitude determination algorithm consists of an augmented Kalman filter, an INS, and an integrated Kalman filter. The augmented Kalman filter compensates the time-delay of the vehicle's navigation results and the integrated Kalman filter estimates the navigation error of the INS. In order to evaluate performance of the proposed algorithm, vehicle's navigation outputs and IMU measurements were generated using sensors' model-based measurement generator and initial attitude estimation errors of the proposed algorithm and the conventional algorithm without the augmented Kalman filter were compared for the generated measurements. The evaluation results show that the proposed algorithm has better accuracy.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.6
• /
• pp.47-53
• /
• 2007

True motion estimation is necessary for deinterlacing, frame-rate conversion, and film judder compensation. There have been several block-based approaches to find true motion vectors by tracing minimum sum-of-absolute-difference (SAD) values by considering spatial and temporal consistency. However, the algorithms cannot find robust motion vectors when the texture of objects is changed. To find the robust motion vectors in the region, a recursive vector selection scheme and an adaptive weighting parameter are proposed. Previous frame vectors are recursively averaged to be utilized for motion error region. The weighting parameter controls fidelity to input vectors and the recursively averaged ones, where the input vectors come from the conventional estimators. If the input vectors are not reliable, then the mean vectors of the previous frame are used for temporal consistency. Experimental results show more robust motion vectors than those of the conventional methods in time-varying texture objects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2727-2735
• /
• 1997

This paper describes a new fading compensation scheme for Wireless ATM(WATM) sytem using pilot symbols. We have carried out a simulation for bit error rate(BER) and cell loss probability(CLP) to analyze the performance of a new scheme. As the resutls, BER performance we improved by means of HEC only above 3 dB of $E_{b}/N_{0}$ in AWGN, but not at all in fading environment. However, by using a new fading compenstion scheme with HEC, BER performance degraded below to 1 dB of $E_{b}/N_{0}$ in AWGN, but BER and CLP performances in WATM system were improved remarkably, and meeted at CLP performance criterion for K=10 dB rician fading. Also, code rate will be high and harware size of codec will be small by using this new scheme with HEC OR FEC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12A
• /
• pp.1009-1018
• /
• 2003

A new fading channel estimation technique is proposed for an OFDM based modem In the ITS system. The algorithm is based on the transfer function extraction of the channel using the pilot signals and compensated the channel preceding the equalization. The newly derived algorithm is division-free arithmetic operations allows the faster circuit operation and the smaller circuit size. Proposed techniques compensate firstly the distortion which is generated at fading channels and secondly eliminate inter-symbol interference. All algorithms are suitability estimated and improved for a system implementation using digital circuits. As the results, the circuit size is reduced by 20% of the conventional design and achieved about 10% performance improvement at low SNR under 10dB in case of ITS system adapted 16-QAM mode.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.10B
• /
• pp.1382-1389
• /
• 2001

움직임 보상-이산 코사인 변환 (motion compensation-discrete cosine transform : MC-DCT) 기반의 동영상 부호화 기법이 부호화 효율성 및 구현의 단순성으로 인해 널리 사용되고 있으나, 에러 환경에서 구조적으로 취약한 면이 있다. 본 논문에서는 다중 메모리 움직임 보상 예측 (long-term memory motion compensated prediction : LTMP) 기반의 다중 레프런스 프레임을 사용하여 에러에 강인한 동영상 부호화 기법을 제안한다. 또한 제안하는 알고리듬에 기반한 에러 은닉 기법 (error concealment : EC)을 구현한다. 즉, R-D (rate-distortion) 최적화에 프레임간 움직임 벡터 (temporal motion vectors)의 확산 인자를 추가하여 에러에 대한 강인성 및 에러 은닉 기법의 효율성을 증가시켰다. 또한, 제안하는 알고리듬은 시간축상의 에러 전파를 피드백 정보 (negative acknowledgement : NAK)를 사용하여 억제한다. 즉, NAK는 채널 에러에 의해 손실된 영역과 에러가 전파된 영역을 추정하여 움직임 보상 영역에서 제외되도록 하는데 이용된다. 따라서, 제안하는 알고리듬은 PSNR 측면에서 FIU (forced intra update)에 근사하는 성능을 보이나, FIU와는 달리 비트율의 증가를 피할 수 있어 제한된 대역폭의 네트웍을 효율적으로 사용할 수 있다. 컴퓨터 모의 실험을 통해 제안하는 알고리듬이 기존의 H.263 및 LTMP 기반의 부호기에 비해 에러 환경에서 주관적 및 객관적 화질 측면에서 성능이 우수함을 보인다.

• Composites Research
• /
• v.29 no.1
• /
• pp.1-6
• /
• 2016

Low-speed impact was localized on a stiffened composite structure, using 4 FBG sensors with 100 kHz-sampling rate interrogator and devised localization algorithm. The composite specimen consists of a main spar and several stringers, and the overall size of the specimen's surface is about $0.8{\times}1.2m$. Pre-stored reference data for 247 grid locations and 36 stiffener locations are gathered and used as comparison target for a random impact signal. The proposed algorithm uses the normalized cross-correlation method to compare the similarities of the two signals; the correlation results for each sensor's signal are multiplied by others, enabling mutual compensation. 20 verification points were successfully localized with a maximum error of 43.4 mm and an average error of 17.0 mm. For the same experimental setup, the performance of the proposed method is evaluated by reducing the number of sensors. It is revealed that the mutual compensation between the sensors is most effective in the case of a two sensor combination. For the sensor combination of FBG #1 and #2, the maximum localization error was 42.5 mm, with average error of 17.4 mm.

• Journal of Computational Design and Engineering
• /
• v.2 no.4
• /
• pp.206-217
• /
• 2015

This paper presents a complete S-shape feed rate scheduling approach (CSFA) with confined jerk, acceleration and command feed rate for parametric tool path. For a Non-Uniform Rational B-Spline (NURBS) tool path, the critical points of the tool path where the radius of curvature reaches extreme values are found firstly. Then, the NURBS curve is split into several NURBS sub-curves or blocks by the critical points. A bidirectional scanning strategy with the limitations of chord error, normal/tangential acceleration/jerk and command feed rate is employed to make the feed rate at the junctions between different NURBS blocks continuous. To improve the efficiency of the feed rate scheduling, the NURBS block is classified into three types: short block, medium block and long block. The feed rate profile corresponding to each NURBS block is generated according to the start/end feed rates and the arc length of the block and the limitations of tangential acceleration/jerk. In addition, two compensation strategies are proposed to make the feed rate more continuous and the arc increment more precise. Once the feed rate profile is determined, a second-order Taylor's expansion interpolation method is applied to generate the position commands. Finally, experiments with two free-form NURBS curves are conducted to verify the applicability and accuracy of the proposed method.

• MALSORI
• /
• no.59
• /
• pp.13-25
• /
• 2006

In previous study, the linlog(linear log) RASTA(J-RASTA) approach based on PLP was proposed to deal with both the channel effect and the additive noise. The extraction of PLP required generally more steps and computation than the extraction of widely used MFCC. Thus, in this paper, we apply the linlog function to the MFCC for investigating the possibility of simple compensation method that removes both distortion. With the experimental results, the proposed method shows the similar tendency to the linlog RASTA-PLP_ When the J value is set to le-6, the best ERR(Error Reduction Rate) of 33% is obtained. For applying the linlog function to the feature extraction process, the J value plays a very important role in compensating the corruption. Thus, the study for the adaptive J or noise dependent J estimation is further required.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.142-143
• /
• 2001

Cell gap은 LCD(Liquid Crystal Display)의 중요한 파라미터들 중의 하나이다. cell gap이 LCD의 광학적인 성능에 영향을 주기 때문에 정확한 cell gap 측정방법은 제조공정을 향상시키는데 중요하다 특히 최근 고속 영상 디스플레이를 제공할 수 있는 장점 때문에 낮은 cell gap의 LCD가 요구되고 있는 시장 추세에 따라 낮은 cell gap을 측정할 수 있는 기술이 요구되고 있다. LCD의 cell gap 측정 방법들 가운데 가장 보편화되어 있는 것으로 회전편광자법(rotating polarizer method)[1, 2]과 위상보상법(phase compensation method)[3,4]을 들 수 있는데 낮은 셀갭을 정확히 측정하기가 어려우며 주기적인 해가 발생한다는 단점이 있다. (중략)