• Journal of Information Display
• /
• v.7 no.1
• /
• pp.19-24
• /
• 2006

We propose optical configurations of a double-cellgap liquid crystal cell for transflective displays with wide viewing angle and high contrast ratio. The reflective part is designed in the wide-band quarter wave structure to achieve good dark state. For the transmissive part, the compensation method is applied to achieve the super-achromatic dark state, and three switching methods are used : which are vertical switching, horizontal switching to $30^{\circ}$and horizontal switching to $120^{\circ}$, to achieve the bright state.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.667-670
• /
• 1999

An active power filter is used to eliminate harmonic currents. This paper applied the extension pq theory to harmonic currents compensation. An active power filter based on extension pq theory is more effective than pq theory in 3-phase unsymmetrical voltage system. When extension pq theory is used, the result of simulation present source current is not distorted. Pulse-width modulation method is CRPWM(Current-Regulated PWM).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.531-534
• /
• 2003

The electro-optical characteristics of the In-Plane switching Twisted nematic (IT) mode were studied. The advantage of this mode is not only the wide viewing angle characteristics without adopting any compensation films, but also the wide cell gap error margin. The electro-optical characteristics of IT mode were evaluated by the experiments and computer simulation. In this paper, we studied the viewing angle characteristics, color-shift and response time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.9
• /
• pp.983-987
• /
• 2004

We have studied electro-optic characteristics of reflective optically compensated splay (R-OCS) cell. The initial configuration of this cell is in splay form such that a mid director lies parallel to the substrate and around it hybrid structure is formed symmetrically so the optically compensation effect exists. Optimized optical configurations could be achieved by using a single polarizer, a quarter-wave film and a cell with quarter-wane retardation. The optimal cell retardation is 0.34 ${\mu}$m, allowing to have large cell gap. The cell provides high contrast ratio of 80:1 at normal direction and the region with contrast ratio over 5:1 covert up to 160$^{\circ}$ horizontally and vertically at all wavelength range.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.11
• /
• pp.1153-1162
• /
• 1990

The torque ripple reduction method is studied to improve the speed fluctuation of permanent magnet flat type brushless DC motors. To reduce the torque ripple, this study developed the compensation method of the 5'th harmonics component of air gap flux waveform which pass through the driving coils. 1/2 inch VTR was considered. As the result of this study, we can reduce the torque ripple and the speed fluctuation of the capstan motor about 20% then before and we can obtain not only better characteristics of wow/flutter but more useful capstan motors which can be applied in the multi-function VTRs.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.5
• /
• pp.470-478
• /
• 1991

In this study, a variety of characteristics were shown experimentally under mechanically unbalnced states expected in a practicl system that linear motor is used as a driving motor of magneticlly levitated transit and the design criterion of the linear motor has been proposed. Since, with slip being at 0.1, end effect was reduced a little to increase thrust about 6.14 percents in case thatsinusoidal current conducted 5[A] in short coil at each end of linear motor for compensation of it, if the ratio of sinusoidl current versus input currents is adjusted properly, it is thought that this method small be effective one. And if the gap of exit region is bigger than that of entry region, end effect will be reduced. As a result, more effective driving will be obtained.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.3
• /
• pp.180-191
• /
• 2022

In this paper, a single-stage alternating current (AC)-DC converter is proposed for the automated-guided vehicle wireless charging system. The proposed converter is capable of soft-switching under all input voltage (VAC: 220 Vrms ± 10%), load conditions (0-1 kW), and air gap changes (40-60 mm) by phase control at a fixed switching frequency. In addition, controlling a wide output voltage (Vo: 39~54 VDC) is possible by varying the link voltage and improving the input power factor and the total harmonic distortion factor. Experimental results were verified by making a prototype of a 1-kW wireless power charging system that operates with robustness to changes in air gaps.

• Design & Manufacturing
• /
• v.14 no.1
• /
• pp.8-14
• /
• 2020

In general, auto parts production assembly line is assembled and produced by automatic mounting by an automated robot. In such a production site, quality problems such as misalignment of parts (doors, trunks, roofs, etc.) to be assembled with the vehicle body or collision between assembly robots and components are often caused. In order to solve such a problem, the quality of parts is manually inspected by using mechanical jig devices outside the automated production line. Automotive inspection technology is the most commonly used field of vision, which includes surface inspection such as mounting hole spacing and defect detection, body panel dents and bends. It is used for guiding, providing location information to the robot controller to adjust the robot's path to improve process productivity and manufacturing flexibility. The most difficult weighing and measuring technology is to calibrate the surface analysis and position and characteristics between parts by storing images of the part to be measured that enters the camera's field of view mounted on the side or top of the part. The problem of the machine vision device applied to the automobile production line is that the lighting conditions inside the factory are severely changed due to various weather changes such as morning-evening, rainy days and sunny days through the exterior window of the assembly production plant. In addition, since the material of the vehicle body parts is a steel sheet, the reflection of light is very severe, which causes a problem in that the quality of the captured image is greatly changed even with a small light change. In this study, the distance between the car body and the door part and the door are acquired by the measuring device combining the laser slit light source and the LED pattern light source. The result is transferred to the joint robot for assembling parts at the optimum position between parts, and the assembly is done at the optimal position by changing the angle and step.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.47-52
• /
• 2012

A power amplifier is one of important factors for basestation's efficiency and the researches for efficency enhancement focus Doherty amplifier structure with GaN power devices in these days. A memory effect of Doherty amplifier affect operation characteristics for linearity and efficiency. This paper reports on electrothermal nonlinearity modeling and compensation for GaN Doherty amplifier's distortion. Also this paper reports on the dynamic expression of the instantaneous junction temperature as a function of the instantaneous dissipated power. We design distortion model for GaN Doherty amplifier and predistortion compensator for electrothermal memory effect from the proposed behavior model parameters. The simulations was evaluated by ADS Tools and GaN Doherty amplifier with 37dBm. The GaN Doherty amplifier with compensator enhanced about 16dB than without electrothemal memory effect compensator in 2-tone output spectrum.

• Journal of Broadcast Engineering
• /
• v.12 no.6
• /
• pp.585-595
• /
• 2007

Distributed video coding is a new video coding paradigm based on Slepian-Wolf and Wyner-Ziv's information theory Distributed video coding whose decoder exploits side information transfers its computational burden from encoder to decoder, so that encoding with light computational power can be realized. RD performance is superior than that of standard video coding without motion compensation process but still has a gap with that of coding with motion compensation process. This parer introduces basic theory of distributed video coding and its structure and then shows RD performances of DVCs whose coding style is different from each other and of a DVC as a spatial scalable video coder.