• 제목/요약/키워드: Compatibility condition

검색결과 240건 처리시간 0.03초

한글타자 행동에서 자극-반응 합치도 효과 (The Effect of Stimulus-Response Compatibility on Hangul Transcription Typing Behavior)

  • 조양석;황태웅
    • 인지과학
    • /
    • 제5권2호
    • /
    • pp.25-45
    • /
    • 1994
  • 본 연구에서는 한글 자사 타자 행동에서 자극-반응 합치도 효과가 나타나는 지의 여부를 알아보았다. 이를 위해 오른손에 2개, 왼손에 2개의 건반을 사용하고 자음과 모음을 담당하는 손을 조작하여 합치도가 높은 조건과 합치도가 낮은 조건으로 나누 었다. 그리고 한글 낱자를 제시하여 피험자로 하여금 가능한 한 빠르고 정확하게 반 응하도록 하고 반응 개시 시간과 반응간 시간을 측정하였다. 그 결과 한글 전사 타자 행동에서 자극-반응 합치도 효과가 나타났다. 즉 합치도가 높은 조건에서 세로 모음 글자를 타자하는 경우 촉진 효과가 나타났으며, 합치도가 낮은 조건에서는 억제 효과 가 나타났다. 그러나 합치도에 중성 자극인 가로 모음 글가에서는 자극-반응 합치도 효과가 나타나지 않았으며, 중성자극이 포함된 종성이 있는 글자에서는 자극-반응 합 치도 효과가 적게 나타났다. 또한 이중 모음 글자에서는 그 효과가 나타지 않았다. 또한 이러한 자극-반응 합치도 효과는 운동개시 시간에만 영향을 주었는데 이는 자극- 반응 합치도 효과가 운동 프로그램을 구성하는 단계에서만 영향을 미침을 나타내는 것이다.

  • PDF

분할단계법의 경계조건에 관한 연구: 적합성, 안정성 및 정확도 (Investigation on Boundary Conditions of Fractional-Step Methods: Compatibility, Stability and Accuracy)

  • 김영배;이문주;오병도
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집E
    • /
    • pp.410-415
    • /
    • 2001
  • An analytical and numerical examination of second-order fractional-step methods and boundary condition for the incompressible Navier-Stokes equations is presented. In this study, the compatibility condition for pressure Poisson equation and its boundary conditions, stability, and numerical accuracy of canonical fractional-step methods has been investigated. It has been found that satisfaction of compatibility condition depends on tentative velocity and pressure boundary condition, and that the compatible boundary conditions for type D method and approximately compatible boundary conditions for type P method are proper for divergence-free velocity for type D and approximately divergence-free for type P method. Instability of canonical fractional-step methods is induced by approximation of implicit viscous term with explicit terms, and the stability criteria have been founded with simple model problems and numerical experiments of cavity flow and Taylor vortex flow. The numerical accuracy of canonical fractional-step methods with its consistent boundary conditions shows second-order accuracy except $D_{MM}$ condition, which make approximately first-order accuracy due to weak coupling of boundary conditions.

  • PDF

ELECTRICAL INTERFACES COMPATIBILITY ANALYSIS FOR THE COMS AOCS

  • Koo, Jae-Chun;Kim, Eui-Chan
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
    • /
    • pp.183-186
    • /
    • 2007
  • The aim of this analysis is to verify the electrical compatibility of the interfaces which exist between COMS(Communication, Ocean and Meteorological Satellite) AOCS(Attitude Orbit Control Subsystem) equipments and external equipments. For each interface, this study checked the compatibility between equipments for the power links, commands, digital telemetry, analog telemetry and failure condition. In addition with this interface compatibility verification, this study outputs the electrical and manufacturing constraints to be applied at harness level.

  • PDF

Predicting the flexural capacity of RC beam with partially unbonded steel reinforcement

  • Wang, Xiao-Hui;Liu, Xi-La
    • Computers and Concrete
    • /
    • 제6권3호
    • /
    • pp.235-252
    • /
    • 2009
  • Due to the reduction of bond strength resulting from the high corrosion level of reinforcing bars, influence of this reduction on flexural capacity of reinforced concrete (RC) beam should be considered. An extreme case is considered, where bond strength is complete lost and/or the tensile steel are exposed due to heavy corrosion over a fraction of the beam length. A compatibility condition of deformations of the RC beam with partially unbonded length is proposed. Flexural capacity of this kind of RC beam is predicted by combining the proposed compatibility condition of deformations with equilibrium condition of forces. Comparison between the model's predictions with the experimental results published in the literature shows the practicability of the proposed model. Finally, influence of some parameters on the flexural capacity of RC beam with partially unbonded length is discussed. It is concluded that the flexural capacity of the beam may not be influenced by the completely loss of bond of the whole beam span as long as the tensile steel can yield; whether or not the reduction of the flexural capacity of the beam resulting from the loss of bond over certain length may occur depends on the detailed parameters of the given beam.

통신해양기상위성 진행파관증폭기 전기접속 적합성 해석 (Electrical Interfaces Compatibility Analysis for the COMS TWTA)

  • 구자춘;최재동
    • 항공우주기술
    • /
    • 제7권1호
    • /
    • pp.108-114
    • /
    • 2008
  • 본 해석의 목적은 통신해양기상위성 통신 탑재체의 진행파관증폭기와 외부 유닛들 사이의 전기접속에 대해 적합성을 검증하는 것이다. 본 연구에서는 전력링크, 명령, 디지털 측정, 아날로그 측정 및 실패상태 또는 조립시험 오류들에 대해 유닛들 사이의 적합성을 확인하였다. 본 접속 적합성 검증에 추가적으로 본 연구는 하니스 레벨에서 적용되는 전기 및 제작에서 권고사항을 제공한다.

  • PDF

화물과 트롤리가 만드는 로프각이 화물의 진자운동에 미치는 영향: 적합조건과 분기조건 (The Effect of Fleet-Angle on Sway Motions of a Cargo: Compatibility and Bifurcation Conditions)

  • 신장용;고성희;홍경태;홍금식
    • 한국해양공학회지
    • /
    • 제19권2호
    • /
    • pp.60-66
    • /
    • 2005
  • This paper investigates the relationship between the fleet-angle of the hoisting rope and the swaying and pitching angles of a cargo in container cranes. It is found that for a given disturbance, when the fleet-angle is large, the sway Angle becomes smaller, but the pitching angle becomes larger. Therefore, for a quick suppression of a sway motion, it is desirable to have a large fleet-angle. The compatibility and bifurcation conditions, regarding instability, are characterized.

저수축제 폴리스틸렌과 불포화 폴리에스터 수지를 사용한 Sheet Molding Compound 제조 및 특성 (Preparation and Characteristic of Sheet Molding Compound using Unsaturated Polyester Resin with Low Profile Agent of Polystyrene)

  • 배기붕;이상구;윤홍진;이종대
    • Korean Chemical Engineering Research
    • /
    • 제50권3호
    • /
    • pp.588-593
    • /
    • 2012
  • 불포화 폴리에스터(unsaturated polyester, UP)와 저수축제(low profile agent, LPA), 폴리스틸렌(polystyrene, PS)과의 compatibility가 불포화 폴리에스터와 저수축제의 비율, 혼합시간, 혼합온도 그리고 추가로 투입되는 불포화 폴리에스터 수지량과 같은 다양한 조건하에서 확인되었다. 1단계로 1700 rpm의 교반속도에서 제조된 수지 혼합액의 경우, 불포화 폴리에스터 수지(unsaturated polyester resin, UPR) 투입량 25 g, 약 $30^{\circ}C$의 반응온도에서 상대적으로 작은 입자 크기 및 상분리율을 나타내었다. 2단계 수지 혼합액의 경우, 2차로 투입된 45 g의 불포화 폴리에스터 수지 혼합액에서 향상된 compatibility를 보였다. 이러한 결과는 혼합조건이 불포화 폴리에스터 수지와 저수축제 혼합액의 compatibility에 중요한 역할을 한다는 것을 의미한다. 또한, 상기조건을 통해 제조된 sheet molding compound (SMC)를 사용해서 만든 샘플은 흡수율, 수축율 및 광택도에서 향상된 결과를 나타내었다.

Ergonomic Recommendation for Optimum Positions and Warning Foreperiod of Auditory Signals in Human-Machine Interface

  • Lee, Fion C.H.;Chan, Alan H.S.
    • Industrial Engineering and Management Systems
    • /
    • 제6권1호
    • /
    • pp.40-48
    • /
    • 2007
  • This study investigated the optimum positions and warning foreperiod for auditory signals with an experiment on spatial stimulus-response (S-R) compatibility effects. The auditory signals were presented at the front-right, front-left, rear-right, and rear-left positions from the subjects, whose reaction times and accuracies at different spatial mapping conditions were examined. The results showed a significant spatial stimulus-response compatibility effect in which faster and more accurate responses were obtained in the transversely and longitudinally compatible condition while the worst performance was found when spatial stimulus-response compatibility did not exist in either orientation. It was also shown that the transverse compatibility effect was found significantly stronger than the longitudinal compatibility effect. The effect of signal position was found significant and post hoc test suggested that the emergent warning alarm should be placed on the front-right position for right-handed users. The warning foreperiod prior to the signal presentation was shown to influence reaction time and a warning foreperiod of 3 s is found optimal for the 2-choice auditory reaction task.

순수금속의 재료물성치와 마찰.마멸특성에 대한 연구 (The Effects of Relative Material Properties on the Friction and Wear Behavior of Pure Metals)

  • 황동환;성인하;김대은
    • Tribology and Lubricants
    • /
    • 제14권2호
    • /
    • pp.10-20
    • /
    • 1998
  • In this paper, the effects of material properties on the friction and wear behavior of pure metals are investigated. The sliding material pairs are selected based on their relative compatibility and relative hardness ratio of the specimen. The initial and steady-state friction coefficients are obtained in the experiments and the wear rates are quantitatively investigated. It is shown that the initial friction coefficient is affected by the hardness ratio of sliding materials. Furthermore, in steady state condition, neither hardness ratio nor compatibility has significant influence on the frictional behavior. As for wear, the ductility of the metal affects the wear particle generation process which in turn affects the frictional behavior. The findings of this research suggest that frictional interaction cannot be simply characterized by either compatibility or hardness ratio of the materials undergoing sliding contact.

통신해양기상위성 휠 전기접속 적합성 해석 (Electrical Interfaces Compatibility Analysis for the COMS Wheels)

  • 구자춘;김의찬
    • 항공우주기술
    • /
    • 제6권1호
    • /
    • pp.103-108
    • /
    • 2007
  • Eurostar 3000 자세제어 시스템은 자세 안정도에 대한 강력한 요구사항 없이 통신 임무에 최적화 되어 있음으로 통신해양기상위성 광학 관찰 임무에서 정밀 자세 안정도 요구사항을 만족하기 위해서는 개선되어야 한다. 이 통신해양기상위성 구성의 제한 사항은 휠에 대해 특수성을 유발시킨다. 본 해석의 목적은 통신해양기상위성 휠과 외부 유닛들 사이의 전기접속에 대해 적합성을 검증하는 것이다. 본 연구에서는 전력링크, 명령, 디지털 측정, 아날로그 측정 및 실패 상태 또는 조립시험 오류들에 대해 유닛들 사이의 적합성을 확인하였다. 본 접속 적합성 검증에 추가적으로 본 연구는 하니스 레벨에서 적용되는 전기 및 제작에서 권고사항을 제공한다.

  • PDF