• International journal of advanced smart convergence
• /
• 제4권1호
• /
• pp.120-126
• /
• 2015

This research is a comparison of the characteristics of the displacement isolines due to powder-die-wall friction that arise during the compaction of ceramic powders in conventional die. It has been done using the CosmosWorks software package of the SolidWorks simulation software. The results of comparative simulation with FEM showed that the comparison of the displacement isolines and distribution of deformation of the ceramic powders. In the case of conventional uniaxial dry compaction for long length cylindrical green compact, considerable bending of the layers in the form of a cone can be observed. It is symmetry along centerline of cylindrical green compact. The distributions of the deformation of the green compacts (diameter 14 mm, height 20 mm) as a result of conventional compaction under ultrasonic vibration with power 1 and 2 kW are reduced to 4% and 6.5% when compared with conventional compaction without ultrasonic vibration respectively. Thus, density distribution can be minimized by increasing the power of ultrasonic vibration.

• 한국측량학회지
• /
• 제35권2호
• /
• pp.91-102
• /
• 2017

Backpack-mounted mapping system is firstly introduced for flexible movement in indoor spaces where satellite-based localization is not available. With the achieved advances in miniaturization and weight reduction, use of LiDAR (Light Detection and Ranging) sensors in mobile platforms has been increasing, and indeed, they have provided high-precision information on indoor environments and their surroundings. Previous research on the development of backpack-mounted mapping systems, has concentrated mostly on the improvement of data processing methods or algorithms, whereas practical system components have been determined empirically. Thus, in the present study, a simulator for a LiDAR sensor (Velodyne VLP-16), was developed for comparison of the effects of diverse conditions on the backpack system and its operation. The simulated data was analyzed by visual inspection and comparison of the data sets' statistics, which differed according to the LiDAR arrangement and moving speed. Also, the data was used as input to a point-cloud registration algorithm, ICP (Iterative Closest Point), to validate its applicability as pre-analysis data. In fact, the results indicated centimeter-level accuracy, thus demonstrating the potentials of simulation data to be utilized as a tool for performance comparison of pointdata processing methods.

• 한국농공학회지
• /
• 제38권4호
• /
• pp.110-124
• /
• 1996

This study was conducted to simulate long seres of synthetic monthly flows by multi-season first order Markov model with selection of best fitting frequency distribution, harmonic synthetic and harmonic regression models and to make a comparison of statistical parameters between observes and synthetic flows of five watersheds in Geum river system. The results obtained through this study can be summarized as follow. 1. Both gamma and two parameter lognormal distributions were found to be suitable ones for monthly flows in all watersheds by Kolmogorov-Smirnov test. 2. It was found that arithmetic mean values of synthetic monthly flows simulated by multi-season first order Markov model with gamma distribution are much closer to the results of the observed data in comparison with those of the other models in the applied watersheds. 3. The coefficients of variation, index of fluctuation for monthly flows simulated by multi-season first order Markov model with gamma distribution are appeared closer to those of the observed data in comparison with those of the other models in Geum river system. 4. Synthetic monthly flows were simulated over 100 years by multi-season first order Markov model with gamma distribution which is acknowledged as a suitable simulation modal in this study.

• 한국해양공학회지
• /
• 제12권1호
• /
• pp.107-112
• /
• 1998

The purpose of this study is to analyze the amount of available wave power and its characteristics related to the development of apractical system for ocean wave energy conversion in Korean coastal waters. The analysis method of wave power was established through comparison between theory and numerical simulation of deep sea wave by Inverse Fourier Transform with random phase method. Based on the results of comparison, wave power was estimated by use of data set from observed offshore and coastal waves and hindasted deep sea waves around the Korean peninsula. Annual mean wave power is estimated as about 1.8 ~ 7.0 kW for every metre of wave frontage at East sea, 1.5~5.3 kW at South sea and 1.0 ~ 4.1 kW at West sea, respectively. Mean wave power along deep sea front of coastal waters of Korea amounts to about 4.7 GW. Regional distribution and seasonal variation of wave power were discussed to develop practical utilization system of wave power of not so high grade of available wave power.

• 한국항만학회지
• /
• 제8권1호
• /
• pp.65-74
• /
• 1994

There are some turn maneuvers, such as hard Round Turn, Turning Short Round, Williamson Turn and Single Turn, of effectively returning a ship back close to the original track in case of emergency situations of man-overboard and intentional delay of port entrance time, and so forth. But the author developed the new turn maneuvers of Double 30 (woo) Turn originally by means of simulation experiments of Full-Mission Shiphandling Simulator. The conclusions of this study are as follows: 1) By comparison of existing Williamson Turn and Turning Short Round this Double 30(woo) Turn is all-weather multipurpose turn maneuvers in some respects, 2) According to simulation experiments this Double 30 (woo) Turn saved approximately 20-35% of total turning time to the original position and reduced maximum advances by 8-10% approximately in comparison to that of Williamson Turn, 3) Except for emergency men-overboard the Reverse Williamson Turn was proposed as a new reverse maneuver of returning a ship back to the original track.

• 천문학회지
• /
• 제29권spc1호
• /
• pp.123-124
• /
• 1996

Snapshots of eight SA and standard fields from low to high galactic latitudes were made using the KPNO 0.9m 2K $\times$ 2K CCD with a limiting magnitude from 19 to 22.5. The purpose of this study is to determine the vertical distribution of stars with respect to Galactic latitude and z-distance in comparison with the model simulation between intermediate population to the 'thick disk' component of scale height of a few kpc. Comparison of the preliminary results between observed and model simulation for 3 of the S fields shows good agreement both in V-mag and B- V color distributions. A bimodal distribution in B- V at high galactic latitude seems to be represented by a halo and 'thick disk' dwarf in the blue and by a normal disk dwarf population in the red.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.394-397
• /
• 2014

This paper deals with the comparison and dynamic behavior of a moving-coil linear oscillatory actuator (MCLOA) with/without a mechanical spring. On the basis of a dynamic simulation model, the dynamic characteristics such as a current and a stroke of the MCLOA without the spring are predicted for various values of frequency. And then, dynamic test results are given to confirm the dynamic simulations. Finally, this paper describes the influence of the spring on the dynamic behavior of the MCLOA from the dynamic experiments of the MCLOA with/without the spring.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.111-114
• /
• 2005

This paper presents a comparison of experimental value by hemispherical grounding simulation system and calculated value by CDEGS program for ground potential rise of structure. When a test current flowed through structure grounding electrodes, ground potential rise was measured and analyzed for types of structure using the hemispherical grounding simulation system in real time, and was computed by means of CDEGS program. The model structures were designed and fabricated with two types on a scale of one-one hundred sixty. When the experimental data were compared with the theoretical values, the similar profile was shown. Therefore, the confidence of measurement was obtained. The distributions of ground surface potential are dependent on the resistivity and absorption percentage in concrete attached to structure.

• 소성∙가공
• /
• 제7권3호
• /
• pp.282-290
• /
• 1998

In bulk metal forming processes prediction of tool life is very important for saving production cost and achieving good material properties. Generally the service life of tools in metal forming process is limited to a large extent by wear, fracture and plastic deformation of tools. In case of hot and warm forging processes tool life depends on wear over 70%. In this study finite element analyses are con-ducted to warm and hot forging by adopting suggested wear model. By comparison of simulation and eal profile of die suggested wear model. By comparison of simulation and real profile of die suggested model is verified.

• 한국조경학회지
• /
• 제33권1호
• /
• pp.49-57
• /
• 2005

The aim of this study was to explain the relationship between the landscape organization and evaluating factors to harmonize the buildings with natural landscape using the landscape simulation models (near view less than $100{\cal}m$) controled the distance and obtain some knowledges about the introduction of buildings into the recreation forest. Through this study, the results were summarized as follow ;1) As the distance got to be near, the evaluation of comprehensive scenery and natural quality became low. 2) At the view points according to the distance the clear landscape organization showed a high value of scenery in comparison with the simple landscape organization, 3) As the coniferous forest showed more high value in comparison with the deciduous forest, the forest type surrounding cottage is important factor evaluating the landscape in the recreation forest area.