• Communications for Statistical Applications and Methods
• /
• 제7권3호
• /
• pp.871-884
• /
• 2000

Using simulation, we compare the perturbation analysis estimate and the forward difference estimate for the first and second derivatives of performance measures in a Markov renewal process. We find the perturbation analysis estimate has much les mean squared error than the traditional forward difference estimate.

• Journal of the Korean Data and Information Science Society
• /
• 제17권1호
• /
• pp.233-244
• /
• 2006

In this paper, we develop the Bayesian multiple comparisons procedure for the binomial distribution. We suggest the Bayesian procedure based on fractional Bayes factor when noninformative priors are applied for the parameters. An example is illustrated for the proposed method. For this example, the suggested method is straightforward for specifying distributionally and to implement computationally, with output readily adapted for required comparison. Also, some simulation was performed.

• 한국수자원학회논문집
• /
• 제46권4호
• /
• pp.373-387
• /
• 2013

수자원시스템의 효율적인 운영 및 관리를 위해서는 하천 시설물들을 효율적으로 연계운영 할 필요가 있다. 그러나 이를 위한 시뮬레이션 모형은 최선의 대안을 보장하지 못하고, 최적화 모형은 복잡한 수계 현황을 유연하게 고려하는데 어려움이 있다. 따라서 시뮬레이션과 최적화 기법의 한계점을 서로 보완해서 활용하는 것이 바람직하다. 이에 본 연구에서는 시뮬레이션과 최적화 기법의 원론적 비교를 통해 각 기법의 장 단점을 분석하고, 두 방법의 한계점을 극복할 수 있는 시뮬레이션 기반의 최적화 모형, CoWMOM의 활용을 제안한다. 아울러 댐-보 연계운영 모형의 활용방안으로 i) 과거의 특정 기간에 대한 분석 도구로써의 활용법과, ii) 미래 수문 정보가 불확실한 상황에서 댐-보 연계운영을 하는 현실에 적합한 모형 활용 절차를 제시한다.

• 한국시뮬레이션학회논문지
• /
• 제7권1호
• /
• pp.69-83
• /
• 1998

In this paper, we present the results of simulation by running parallel VHDL simulation on typical MPP(Massively Parallel Processor) systems such as IBM SP2 and SGI Origin 2000. Parallel simulation uses the synchronous protocol and parallel program is implemented using MPI(Message Passing Interface) based on message passing model, so that it can urn on any parallel programming environment which supports MPI, a standard communication library. And then GVT(Global Virtual Time) computation for parallel simulation is based on the global broadcasting with MPI＿Bcast(), which is a standard function in MPI and piggybacking. Our benchmark exhibits that as size of VHDL grows, the parallel simulation has a better performance compared with the sequential simulation. In addition, we also show the results of comparison between IBM SP2 and SGI Origin 2000 by applying the same application to those indirectly.

• 한국컴퓨터정보학회논문지
• /
• 제23권10호
• /
• pp.151-156
• /
• 2018

The purpose of this study was to find more effective method through comparison of manual chest compression and chest compression using $AutoPulse^{TM}$ device in pre-hospital simulation cardiac arrest. In order to achieve the purpose of the study, ambulance workers did two different style CPR in pre-hospital simulation cardiac arrest. Data analyzed by T test and ANOVA. Findings of this study are as follows. Firstly, manual chest compression is more effective than chest compression using $AutoPulse^{TM}$ device on scene. Secondly, chest compression using $AutoPulse^{TM}$ device is more effective manual chest compression in ambulance and in elevator. In conclusion, these findings provide strong evidence for the importance of hands off time and stable CPR before hospital arrival in explaining patient's prognosis. Therefore, strategies to conduct precise hands off time and stable CPR are needed to improve patient's prognosis.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1260-1271
• /
• 2001

The simulation program which predicts the gas behavior in a spark ignition engine has been developed and verified by the comparison with the experimental results foy the MPI engine, naturally aspirated and turbochared engines with a carburettor. First paper describes the calculations of the behavior of gas in the intake and exhaust system. The generalized method of characteristics including friction, heat transfer, area change and entropy gradients was used to analyse the pipe flow The constant-Pressure model was applied for the analysis of the flow through engine valved, and the constant-pressure perfect-mixing model was applied for the flow at manifold junction. The concept of the sudden area change was used for the muffler and catalytic convertor. Fer the plenum chamber in an MPI engine, constant-pressure model and constant-volume model were both examined. Through the comparison of predicted results with experiments, the simulation program was verified by showing good prediction of the behavior of IC engine qualitatively and quantitatively under wide range of operating conditions.

• International journal of advanced smart convergence
• /
• 제12권4호
• /
• pp.217-223
• /
• 2023

In this study, we compared the VacCAD and VacTran, commercial vacuum simulators, to investigate the simulation applicability and efficiency as vacuum simulation software. It was verified on reliability and simplicity of simulation modelling, and characteristics of the pump combinations, pumping down curves, and employed vacuum materials. First, usability of simulation schematics was estimated through the modeling tools and the overall simulation characteristics of each simulator were compared to evaluate the applicability in practice. Simulation reliability of each simulator was also probed by comparing the pumping performance characteristics of commercial high vacuum system models. In addition, the degree of tolerances on both simulators was also evaluated through pumping down analysis considering outgassing effect due to chamber material variations. The higher effectiveness and expediency of VacCAD than VacTran has been presented, and it was also expected that the utilization of VacTan in vacuum applications to be increased due to the higher availability of modelling variations.

• 천문학회보
• /
• 제37권1호
• /
• pp.39.2-39.2
• /
• 2012

We present our study on a comparison of dark matter halo merger history from the runs using different numerical simulation codes. To analyze the uncertainty caused by the use of different N-body calculation methods, we compare the results from two cosmological hydrodynamic simulation codes GADGET-2 and RAMSES, which use a TreePM algorithm and the Adaptive Mesh Refinement(AMR) technique respectively. We perform cosmological dark matter-only simulations with the same parameter set and initial condition for both. The dark matter halo mass functions from two simulation runs correspond well with each other, except for lower mass haloes. The discrepancy on the low-mass haloes in turn causes a notable difference in halo merger rate, especially for the case of extremely minor merger. The result from GADGET-2 predicts that most haloes undergo more number of mergers with small haloes than that from RAMSES, independent of halo mass and environment. However, in the context of the study on galaxy evolution, such extreme minor mergers generally do not have strong effects on galaxy properties such as morphology or star formation history. Hence, we suggest that this uncertainty could be quantitatively negligible, and the results from two simulations are reliable even with only minor difference in merger history.

• 설비공학논문집
• /
• 제18권2호
• /
• pp.112-121
• /
• 2006

To evaluate the performance of ventilation system properly, the correlations among the ventilation rate, indoor air-quality and cooling/heating load should be analysed. In this study, simulation tool to analyze the performance of ventilation system was developed. The simulation tool is based on the TRNSYS and some modules to calculate concentration of pollutants with the operation of ventilation system and to decide the signal of ventilation system were newly developed in this study. And these modules coupled with building load and heating/cooling simulation modules. To verify the validity of developed simulation tool, comparison study between simulation and field study were accomplished. As results, the simulation tool developed in this study can be used to predict the performance of ventilation system with accuracy.

• 한국CDE학회논문집
• /
• 제16권4호
• /
• pp.305-313
• /
• 2011

This paper proposes a method for reusing kinematic design data for virtual facilities, Making a virtual model of a facility involves two major activities: geometric design (virtual model visualization) and kinematic design that should be remodeled frequently whenever design changes occur, Conventionally, a virtual model of an automated facility focuses on the design level, which mainly deals with design verification, alternative comparison, and geometric model diagnosis, Although a design level model can be designed with the information of past models from PLM system, a simulation level model is not sufficient utilized to be reused for kinematic design purpose, We propose a method for reusing kinematic information of a past simulation model to cope with this problem, We use the concept or the 'center of mass', which is a point representing the mean position of the matter in a body or system. And we also use comparison method of a boundary box to identity which 3D objects have to be involved from the design model to a link structure that is contained in the simulation model. Because a proposed method only use not a historical approach but a geometrical approach, it is more effective to apply to the field.