• Journal of Korea Foundry Society
• /
• v.42 no.5
• /
• pp.273-281
• /
• 2022

In order to understand the solidification behavior and microstructural evolution of the Al-Cu-Si ternary eutectic alloy system, changes of the microstructure of the Al-Cu-Si ternary eutectic alloy with different cooling rates were investigated. When the mold preheating temperature is 500℃, primary Si and Al2Cu dendrites are observed, with (α-Al+Al2Cu) binary eutectic and needle-shaped Si subsequently observed. In addition, even when the mold preheating temperature is 300℃, primary Si and Al2Cu dendrites can be observed, and both (α-Al+Al2Cu+Si) areas observed and areas not observed earlier appear. When the mold preheating temperature is 150℃, bimodal structures of the binary eutectic (α-Al+Al2Cu) and ternary eutectic (α-Al+Al2Cu+Si) are observed. When the preheating temperature of the mold is changed to 500℃, 300℃, and 150℃, the greatest change is in the Si phase, and upon reaching the critical cooling rate, the ternary eutectic of (α-Al+Al2Cu+Si) forms. If the growth of the Si phase is suppressed upon the formation of (α-Al+Al2Cu+Si), the growth of both Al and Cu is also suppressed by a cooperative growth mechanism. As a result of analyzing the Al-27wt%Cu-5wt%Si ternary eutectic alloy with a different alloy design simulation programs, it was confirmed that different results arose depending on the program. A computer simulation of the alloy design is a useful tool to reduce the trial and error process in alloy design, but this effort must be accompanied by a task that increases reliability and allows a comparison to microstructural results derived through actual casting.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_4
• /
• pp.1111-1123
• /
• 2023

In recent times, semantic image segmentation methods using deep learning models have been widely used for monitoring changes in surface attributes using remote sensing imagery. To enhance the performance of various UNet-based deep learning models, including the prominent UNet model, it is imperative to have a sufficiently large training dataset. However, enlarging the training dataset not only escalates the hardware requirements for processing but also significantly increases the time required for training. To address these issues, transfer learning is used as an effective approach, enabling performance improvement of models even in the absence of massive training datasets. In this paper we present three transfer learning models, UNet-ResNet50, UNet-VGG19, and CBAM-DRUNet-VGG19, which are combined with the representative pretrained models of VGG19 model and ResNet50 model. We applied these models to building extraction tasks and analyzed the accuracy improvements resulting from the application of transfer learning. Considering the substantial impact of learning rate on the performance of deep learning models, we also analyzed performance variations of each model based on different learning rate settings. We employed three datasets, namely Kompsat-3A dataset, WHU dataset, and INRIA dataset for evaluating the performance of building extraction results. The average accuracy improvements for the three dataset types, in comparison to the UNet model, were 5.1% for the UNet-ResNet50 model, while both UNet-VGG19 and CBAM-DRUNet-VGG19 models achieved a 7.2% improvement.

• Korean Journal of Plant Resources
• /
• v.37 no.1
• /
• pp.62-70
• /
• 2024

Fruit thinning rate and characteristics were investigated for three years on seven promising pear (Pyrus pyrifolia Nakai) cultivars, which were treated by lime-sulfur as an eco-chemical thinning substance. Lime-sulfur was treated twice at the second and third days after full bloom by cultivar. Most of pear cultivars were significantly thinned by lime-sulfur compounds. Especially 'Whangkeumbae', 'Supergold' and 'Hanareum' exhibited high flower thinning rates, 41.5%, 40.1% and 39.9%, respectively. As weather conditions at the lime-sulfur treatment, insolation and cloud amount were correlated with flower thinning rate but not significant (r = 0.49 and r = -0.45, respectively). These results suggest that lime-sulfur is suitable for reducing labor force for flower thinning of Korean pears but flower thinning effects of lime-sulfur can vary depending on other factors such as environmental conditions. This information will provide useful data for low labor force cultivation of Korean pear cultivars.

• Journal of Korean Society of Forest Science
• /
• v.105 no.1
• /
• pp.93-102
• /
• 2016

This research was conducted for major cultivated chestnut (Castanea spp.) in Korea to compare chestnut quality characteristics according to storage temperatures ($4^{\circ}C$ vs. $-1^{\circ}C$) and cultivars. Color, hardness, soluble solids content (SSC), rate of decay and sensory evaluation were investigated during 16 weeks storage. Cultivars 'Tsukuba' and 'Ishizuchi' showed the least pericarp color change while cultivars 'Riheiguri' and 'Daebo' showed the most pericarp color change during storage. Chestnut fruits stored at $-1^{\circ}C$ showed less pericarp color change than those stored at $4^{\circ}C$. Cultivars 'Arima' and 'Tanzawa' exhibited the decrease tendency of hardness with lowest hardness during storage at $-1^{\circ}C$. Chestnut fruits stored at $4^{\circ}C$ showed high hardness than those stored at $-1^{\circ}C$. Cultivars 'Riheiguri' showed the highest increase of SSC, while cultivar 'Arima' showed the lowest increase of SSC after 16 weeks of storage. The SSC increased in nuts from all cultivars at both temperatures, but nuts stored at $-1^{\circ}C$ showed higher increases in SSC than nuts stored at $4^{\circ}C$. Cultivars 'Ishizuchi' and 'Riheiguri' showed high rates of decayed nuts in contrast to cultivars 'Daebo', 'Okkwang' and 'Tanzawa' that showed low rates of decayed nuts during storage. The chestnut fruit stored at $-1^{\circ}C$ showed less decay than fruit stored at $4^{\circ}C$. Texture and sweetness were tested for sensory evaluation. Among the tested cultivars, 'Riheiguri', 'Daebo' and 'Tsukuba' showed hard texture and very sweetness, while 'Tanzawa' showed relatively soft texture. 'Arima' and 'Okkwang' showed weak sweetness during storage. Nuts stored at $4^{\circ}C$ exhibited harder texture than nuts stored at $-1^{\circ}C$ while $-1^{\circ}C$ exhibited more sweetness than nuts stored at $4^{\circ}C$. Chestnuts for hard texture and short-term storage (less than one month), $4^{\circ}C$ will be a proper storage temperature, while in order to store long-term (more than 4 month), $-1^{\circ}C$ will be a proper storage temperature. Result from this study provide base-line data of postharvest management for Korean cultivated chestnut as well as contributing increased product value and income for chestnut producers.

• Korean Journal of Animal Reproduction
• /
• v.23 no.3
• /
• pp.247-256
• /
• 1999

The present study was performed to improve the reproductive disturbance as well as the elimination of microbiological contamination for animals bred under conventional conditions followed by in vitro fertilization and embryo transfer techniques including embryo and sperm freezing, using a mouse strain(M. m. molossinus-tt＠Kist) showing the abnormal behavior disorder derived from Korean wild mice (Mus musculus molossinus). Moreover, hematological and serum biochemical analyses were also carried out to obtain the basic data of this mouse strain The results are summarized as follows: 1. In comparison with hematological data, the numbers of RBC and platelet of this mouse strain were appeared as the higher value those that of the same aged inbred strains such as BALB/c, DBA/2, C57BL/6 and C3H /Hen. However, no differences were found in values of WBC, Hb and Ht. Moreover, total cholesterol of this strain showed a low value but triglyceride, total protein and albumin values were similar as in inbred strains. 2. The average numbers of superovulated oocytes treated with 2.5/2.5 IU and 5.0/5.0 IU of PMSG/hCG were 11.6 and 12.7, respectively. The fertilization rates of 2.5/2.5 IU PMSG /hCG treatment(87.9%) was higher than 5.0/5.0 IU treatment(52.0%) (p＜0.05) and the developmental rate of 2 cell stage embryos were 외 so appeared as higher value 99.0% and 90.6%, respectively. 3. The rates of in vitro fertilization treated with frozen sperm(24.8%) was significantly lower than of that fresh sperm(87.9%), (p＜0.05). 4. The five, six and ten heads of offspring were obtained from frozen-thawed 2 cell embryos by in vitro fertilized, 2 cell embryos from in vitro fertilized by frozen-thawed spermatozoa. and 2 cell embryos by in vitro fertilization, respectively. These offspring developed the expected disease about 2 weeks after birth, which was confirmed that the disease character of this mutant mouse strain was reliably reproduced. 5. MHV(Mouse hepatitis virus) and Staphylococcus aureus were successfully eliminated from conventional animals by in vitro fertilization-embryo transfer and the use of SPF recipient animals.

• The Korean Journal of Applied Statistics
• /
• v.21 no.1
• /
• pp.19-33
• /
• 2008

Linear regression method, proposed by Haseman and Elston(1972), for detecting linkage to a quantitative trait of sib pairs is a linkage testing method for a single locus and a single trait. However, multivariate methods for detecting linkage are needed, when information from each of several traits that are affected by the same major gene are available on each individual. Amos et al. (1990) extended the regression method of Haseman and Elston(1972) to incorporate observations of two or more traits by estimating the principal component linear function that results in the strongest correlation between the squared pair differences in the trait measurements and identity by descent at a marker locus. But, it is impossible to control the probability of type I errors with this method at present, since the exact distribution of the statistic that they use is yet unknown. In this paper, we propose a multivariate nonparametric trend test for detecting linkage to multiple traits. We compared with a simulation study the efficiencies of multivariate nonparametric trend test with those of the method developed by Amos et al. (1990) for quantitative traits data. For multivariate nonparametric trend test, the results of the simulation study reveal that the Type I error rates are close to the predetermined significance levels, and have in general high powers.

• Korea journal of population studies
• /
• v.23 no.2
• /
• pp.167-187
• /
• 2000

The rates and numbers of elderly suicide in Korea have been increased during 1985-1998. This indicates the seriousness of the problems which the elderly are faced with. So many late-life problems may push older people across the edges. Those in unbearable situations may call out fur helps, they may try to cope with various ways, or they may commit suicides. Because it is widely believed that suicide among the elderly can be understood as a personal solution or alternative to late-life problems in old age, the elderly\`s suicides seem to be an appropriate indicator in estimating seriousness of late-life problems. A comparison of the history of suicide research with other populations shows that the several late-life problems have been found with placing an individual elder at risks for increasing suicidal behaviors Research has identified such problems as financial insecurity, retirement, loss of social roles, physical illness, lack of social supports, and loneliness as the problems that increase the incidence of suicidal behavior. Though it is difficult far us to explain and understand the phenomenon of the elderly\`s suicide because of its complexity, we need to ascertain problems and social conditions behind suicides and also to prepare for some appropriate policy-tasks in light of social welfare for the aged, through examining the phenomenon. For explaining the elderly\`s suicide, the theoretical orientations are based on sociological perspectives in the paper. From the standpoints of social integration theory and exchange theory, this study is to examine the relationship between late-life problems and suicide. These two may have been fruitfully employed in conjunction with each other. Finally, this study would identify urgent late-life problems related with the elderly\`s suicide and suggest the relevant policies for Korean elders. Sometime in the near future, the government should be required to provide social welfare programs for the elderly, particularly for those at risk for increasing suicidal behaviors.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.2
• /
• pp.132-136
• /
• 2012

Kenaf (Hibiscus cannabinus) is an annual herbaceous plant of the family Malvacease that has been planted in tropical Africa and Asia region for more than 4000 years and use as source of fiber, energy and feed stock. In this study, the physiological characters and chemical compositions of kenaf mutant variety "Jangdae" developed using gamma irradiation at the Korea Atomic Energy Research Institute (KAERI) were compared with three genetic resources (Auxu, C12, and C14-DRS). Jangdae showed the highest productivity growth rates in fresh yield, dry weight (DW) yield (leaf and stem), node number, and stem thickness. Especially, leaf DW yield of Jangdae was 1.6-3.1 times higher than that of three genetic resources. Also, stem DW yield of Jangdae was 1.6-2.1 times higher than that of three genetic resources. In the analysis of chemical composition, Jangdae showed 16.9% of crude protein content that was 0.86-0.94 times lower than three cultivars. However, Jangdae showed the highest neutral detergent fiber (NDF) contents in leaf (32.5%) and stem (75.2%). Also, acid detergent fiber (ADF) contents of stem and leaf in Jangdae were 64.4% and 33.9%, respectively. Total polyphenol and total flavonoid contents were 22.1 mg/g and 7.4 mg/g in Jangdae. Based on these results, Jangdae would have the potential to become a successful forage crop.

• Korean Journal of Optics and Photonics
• /
• v.25 no.5
• /
• pp.262-272
• /
• 2014

Using an ellipsometer with dual rotating quarter-wave plates, we have analyzed the relationship between Fourier coefficients and Mueller matrices in the cases of an error-free optical system and of five systematic errors (alignment errors and retardation errors in the quarter-wave plates, and alignment error in the analyzer). In the case with five systematic errors, simulation results show that retardation errors cause more error in the diagonal elements of the Mueller matrix than do alignment errors. We have found that errors in the Mueller matrix caused by initial misalignment of the dual quarter-wave plates were the same. We have chosen the rotation rates of two quarter-wave plates such that the rotational frequencies ${\omega}_1$ and ${\omega}_2$ differ by a factor of 5, i.e. ${\omega}_2=5{\omega}_1$. The simulation results show 0.18% relative error in the diagonal elements ($m_{22}$ and $m_{33}$) and 200% relative error in the off-diagonal elements ($m_{23}$ and $m_{32}$), when we compare errors caused by misalignment of the analyzer to those caused by initial misalignment of the quarter-wave plates. We can use these results in measuring accurate Mueller matrices of optical materials.

• Journal of Dairy Science and Biotechnology
• /
• v.35 no.4
• /
• pp.244-248
• /
• 2017

The effects of ultrasonic (1.2~1.7 kJ/g TS) pretreatment on the solubilization of dairy and livestock sludge were separately evaluated to investigate the possibility of recycling dairy sludge as a potential source of organic carbon. Compared to other industrial wastewater and sewage sludge, dairy sludge has higher organic matter content and no toxic materials. The solubilization rates of dairy and livestock sludge, at a specific energy input of 1.7 kJ/g TS, were 14.5% and 10.6%, respectively. After the 90-minute ultrasonic treatment, the soluble COD (chemical oxygen demand) increased about 7.1 times that of the initial SCOD, at an increase rate of $0.022m^{-1}$. In comparison, the increase in soluble nitrogen, which was ~3.4 times that of the initial soluble nitrogen concentration, was much smaller than the increase in SCOD; thus, the C/N ratio increased from 4.0 to 8.7.