• Journal of the Korean Society of Radiology
• /
• v.12 no.7
• /
• pp.895-908
• /
• 2018

As modern science is developed and advanced, examination and number of times using radiation are increasing daily. General diagnostic X-ray generator is installed on stationary form, But X-ray generator was developed because patient who is in the intensive care unit, operation room, emergency room can not move to general x-ray room. What we examine patient by x-ray generator is certainly necessary, So patient exposure is inevitable. but reducing radiation exposure is highly important matter about radiation technology, guardian, patient in the same hospital room, nurse etc. For this reason, rule regarding safety control of diagnostic x-ray generator revised for radiation worker, patient and protector proclaim that mobile diagnostic x-ray shield must placed in case of examine different location excluding operation room, emergency room, intensive care unit. But, radiogical technologist is having a lot of difficulties to examine with mobile x-ray generator, diagnostic x-ray shield partition, image plate and lead apron. So, when we use x-ray generator, we manufacture shield tools can be attached to the mobile x-ray generator On behalf of x-ray shield partition and conduct analysis and in comparison to part of body and distribution of dose rate and find way to reduce radiation exposure through distribution of dose rate of patient within the radiogical technologist, medical team. Mobile x-ray generator aimed at SHIMADZU inc. R-20, We manufactured equipment for shielding x-ray scattered x-ray by installing shielding wall from side to side based on support beam on the mobile x-ray generator. Shielding wall when moving can be folded and designed to expand when examine. Experiment measured five times in each by an angle for dose rate of eyes, thyroid, breast, abdomen and gonad on exposure condition of upper and lower extremity, chest, abdomen which is examined many times by mobile x-ray generator. We used dosimeter RSM-100 made by IJRAD and measured a horizontal dose rate by body part. The result of an experiment, shielding decreasing rate of the front and the rear showed 77 ~ 98.7%. Therefore using self-production shielding wall reduce scattered x-ray occurrence rate and confirm can decrease exposure dose consequently. Therefore, through this study, reduction result which is used shielding wall of self-production will be a role of shielding optimization and it could be answer about reduction of medical exposure recommended by ICRP 103.

• Journal of the Korean earth science society
• /
• v.40 no.2
• /
• pp.135-148
• /
• 2019

Although the technology for the observation of solar radiation is rapidly developing worldwide, in Korea the guidelines for comparing observations of solar radiation are only now under preparation. In this study, a procedure for intercomparison observations of solar radiation was established which accounts for meteorological and geographical conditions. The intercomparisons among observations by national reference pyranometers were carried out at the Asia Regional Radiation Center, Japan, in 2017. Recently, the result of the calibration of the reference pyranometer of the Korean Meteorological Administration (KMA) has been reported. Using the KMA pyranometer as a reference, comparisons between observations and calibrations were carried out for the standard (B to J) pyranometers of the KMA, and for the reference (A) and the standard pyranometers of the Gangneung-Wonju National University. The intercomparisons were carried out between October 24 and October 25, 2018. The sensitivity constants were adjusted according to the results of the data analysis performed on October 24. On October 25, a post-comparison observation was also performed, and the data of the participating pyranometers were verified. The sensitivity constants were calculated using only data corresponding to a solar radiation of $450.0W\;m^{-2}$ or higher. The B and I pyranometers exhibited a small error (${\pm}0.50W\;m^{-2}$), and the applied sensitivity constants were in the range $0.08-0.16{\mu}V(W\;m^{-2})^{-1}$. For the C pyranometer, the adjustment of the sensitivity constant was the largest, i.e., $-0.16{\mu}V(W\;m^{-2})^{-1}$. As a result, the nine candidate pyranometers could be calibrated with an average error of $0.06W\;m^{-2}$ (0.08%) with respect to the KMA reference, which falls within the allowed tolerance of ${\pm}1.00%$ (or ${\pm}4.50W\;m^{-2}$).

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.1
• /
• pp.101-116
• /
• 2019

Technology-based start-up is important in that it encourages innovation, facilitates the development of new products and services, and contributes to job creation. Technology-based start-up activates entrepreneurship when appropriate support is provided within the ecosystem. Thus, understanding the technology-based start-up ecosystem is crucial. The purpose of this study is as follows. First, in Herrmann et al.'s(2015) study, we compare and analyze the ecosystem of each country by selecting representative regions such as Silicon Valley, Tel Aviv, London and Singapore which have the highest ranking in the start-up ecosystem. Second, we try to deeply understand the start-up ecosystem based on in-depth interviews with various stakeholders such as VC investors, start-ups, support organizations, and professors related to the Korean start-up ecosystem. Finally, based on the results of the study, we suggest development and activation of Korean technology-based start-up ecosystem. As a result, the Seoul start-up ecosystem showed a positive evaluation of government support compared to other advanced countries. In addition, it was confirmed that the ratio of tele-work and start-up company working experience of employees was higher than other countries. On the other hand, in Seoul, It was confirmed that overseas market performance, human resource diversity, attracting investment, hiring technological engineers, and the ratio of female entrepreneurs were lower than those of overseas advanced countries. In addition, according to the results of the interview analysis, Seoul was able to find that start-up ecosystems such as individual angel investors, accelerators, support institution, and media are developing thanks to the government's market-oriented policy support. However, in order for this development to continue, it is necessary to improve the continuous investment system, expansion of diversity, investment return system, and accessibility to the global market. A discussion on this issue is presented.

• Journal of Climate Change Research
• /
• v.1 no.1
• /
• pp.31-50
• /
• 2010

The Arctic climate change for the Last Glacial Maximum(LGM) occurred at 21,000 years ago (21ka) was investigated using simulation results of atmosphere-ocean coupled models from the second phase of the Paleoclimate Modelling Intercomparison Program(PMIP2). In the analysis, we used seven models, the NCAR CCSM of USA, ECHAM3-MPIOM of German Max-Planxk Institute, HadCM3M2 of UK Met Office, IPSL-CM4 of France Laplace Institute, CNRM-CM3 of France Meteorological Institute, MIROC3.2 of Japan CCSR at University of Tokyo, and FGOALS of China Institute of Atmospheric Physics. All the seven models reproduces the Arctic climate features found in the present climate at 0ka(pre-industrial time) in a reasonable degree in comparison to observations. During the LGM, the atmospheric $CO_2$ concentration and other greenhouse gases were reduced, the ice sheets were expanded over North America and northern Europe, the sea level was lowered by about 120m, and orbital parameters were slightly different. These boundary conditions were implemented to simulated LGM climate. With the implemented LGM conditions, the biggest temperature reduction by more than $24^{\circ}C$ is found over North America and northern Europe owing to ice albedo feedback and the change in lapse rate by high elevation. Besides, the expansion of ice sheets leads to the marked temperature reduction by more then $10^{\circ}C$ over the Arctic Ocean. The temperature reduction in northern winter is larger than in summer around the Arctic and the annual mean temperature is reduced by about $14^{\circ}C$. Compared to low mid-latitudes, the temperature reduction is much larger in high northern altitudes in the LGM. This results mirror the larger warming around the Artic in recent century. We could draw some information for the future under global warming from the knowledge of the LGM.

• Journal of Nutrition and Health
• /
• v.51 no.6
• /
• pp.580-589
• /
• 2018

Purpose: The purpose of this study was to evaluate the food insecurity status and dietary behavior and examine the association between the food insecurity status and consumption of processed beverage for secondary school students in Vientiane, capital city of Lao PDR. Methods: The study subjects are 714 students (boys = 307 and girls = 407) in four secondary schools (Chao_Anouvong, Phiavat, Saysetha, and Chansavang) of Vientiane, Lao PDR. Data on study subject's demographic characteristics, dietary behavior, food insecurity, and Mini Dietary Assessment (MDA) index were collected. A "Self-Administered Food Security Survey Module for Children Aged 12 Years and Older" developed by the United States Department of Agriculture (USDA) was used for the food insecurity assessment. Results: As a result, 72.7% of the subjects were in a state of food insecurity, and food security was associated with higher socioeconomic status (higher life satisfaction, higher parent's education attainment, higher item ownership, fewer number of siblings, and having more lunches at the school restaurant than at home). Compared to the food insecurity group, the frequency of breakfast, self-rated diet, and the total score of MDA index were higher in the food security group. On the other hand, multiple logistic regression analysis showed that 'food security' was also associated with a higher consumption of processed beverages (OR 1.544; 95% CI 1.078-2.213; p = 0.018). Conclusion: Improving the quality of the diet is essential for adolescents in both the food insecurity and food security groups in Lao PDR. Therefore, it is necessary to provide well organized nutrition education and establish adequate nutrition policy for adolescents in Lao PDR.

• Korean Journal of Labor Studies
• /
• v.24 no.2
• /
• pp.95-136
• /
• 2018

As the number of precariats grows, their poor labor rights and working conditions are becoming issues of major concern all over the world but how to represent their interests is still controversial. Basically, the union is the institutional mechanism for representing the labor rights. However, it is difficult for workplaceand enterprise-based unions to fully represent the labor rights of precarious workers. Recently, so-called community unions have emerged in the United States, the United Kingdom, and Japan as independent organizations representing the rights of non-standard workers. Community unions refer to labor unions which organize precarious workers across firms at the regional level. They are known to be suitable for covering the unemployed, job seekers, indirect employment workers, short-term contract workers, and small-firm workers. In South Korea, since the financial crisis in 1997, a dramatic increase in the number of precariats leads to emergence of new types of trade unions such as the Youth Community Union, the Arbeit Workers' Union, the Artist Social Union and the Korea Musician's Union. They have engaged in various activities to guarantee the labor rights of precariats. Recently, researchers have also tried to identify defining characteristics of these new forms of unionism. To expand research on trade unionism in South Korea, this study compares two different types of community unions: the Youth Community Union and the Arbeit Workers' Union. We believe that this attempt can contribute to the research on the alternative labor movement. For this purpose, this study starts with theoretical discussions on community unions, and compares the Youth Community Union with the Arbeit Workers' Union based on the five characteristics of community unionism: membership and organization structure, the recognition struggle, the type or scope of interest, solidarity with other civic organizations, and the repertoire of resistance strategies. Based on this comparative analysis, this study seeks to foresee the possibility of how community unionism will develop in South Korean in the future.

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.737-743
• /
• 2018

Patient exposure dose exposure test, which is one of the items of accuracy control of Computed Tomography, conducts measurements every year based on the installation and operation of special medical equipment under Article 38 of the Medical Law, And keep records. The CT-Dose phantom used for dosimetry can accurately measure doses, but has the disadvantage of high price. Therefore, through this research, the existing CT - Dose phantom was similarly manufactured with a 3D printer and compared with the existing phantom to examine the usefulness. In order to produce the same phantom as the conventional CT-Dose phantom, a 3D printer of the FFF method is used by using a PLA filament, and in order to calculate the CTDIw value, Ion chambers were inserted into the central part and the central part, and measurements were made ten times each. Measurement results The CT-Dose phantom was measured at $30.44{\pm}0.31mGy$ in the periphery, $29.55{\pm}0.34mGy$ CTDIw value was measured at $30.14{\pm}0.30mGy$ in the center, and the phantom fabricated using the 3D printer was measured at the periphery $30.59{\pm}0.18mGy$, the central part was $29.01{\pm}0.04mGy$, and the CTDIw value was measured at $30.06{\pm}0.13mGy$. Analysis using the Mann - Whiteney U-test of the SPSS statistical program showed that there was a statistically significant difference in the result values in the central part, but statistically significant differences were observed between the peripheral part and CTDIw results I did not show. In conclusion, even in the CT-Dose phantom made with a 3D printer, we showed dose measurement performance like existing CT-Dose phantom and confirmed the possibility of low-cost phantom production using 3D printer through this research did it.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.17-24
• /
• 2019

Purpose: The present study aims to assess the level of coherency and the accuracy of Point dose of the Isocenter of VERO, a linear accelerator developed for the purpose of the Stereotactic Body Radiation Therapy(SBRT). Materials and Method: The study was conducted randomly with 10 treatment plans among SBRT patients in Kyungpook National University Chilgok Hospital, using VERO, a linear accelerator between June and December, 2018. In order to assess the equipment's power stability level, we measured the output constancy by using PTW-LinaCheck, an output detector. We also attempted to measure the level of accuracy of the equipment's Laser, kV(Kilo Voltage) imaging System, and MV(Mega Voltage) Beam by using Tofu Phantom(BrainLab, Germany) to assess the accuracy level of geometrical Isocenter. We conducted a comparative analysis to assess the accuracy level of the dose by using an acrylic Phantom($30{\times}30{\times}20cm$), a calibrated ion chamber CC-01(IBA Dosimetry), and an Electrometer(IBA, Dosimetry). Results: The output uniformity of VERO was calculated to be 0.66 %. As for geometrical Isocenter accuracy, we analyzed the error values of ball Isocenter of inner Phantom, and the results showed a maximum of 0.4 mm, a minimum of 0.0 mm, and an average of 0.28 mm on X-axis, and a maximum of -0.4 mm, a minimum of 0.0 mm, and an average of -0.24 mm on Y-axis. A comparison and evaluation of the treatment plan dose with the actual measured dose resulted in a maximum of 0.97 % and a minimum of 0.08 %. Conclusion: The equipment's average output dose was calculated to be 0.66 %, meeting the ${\pm}3%$ tolerance, which was considered as a much uniform fashion. As for the accuracy assessment of the geometric Isocenter, the results met the recommended criteria of ${\pm}1mm$ tolerance, affirming a high level of reproducibility of the patient's posture. The difference between the treatment plan dose and the actual measurement dose was calculated to be 0.52 % on average, significantly less than the 3 % tolerance, confirming that it obtained predicted does. The current study suggested that VERO equipment is suitable for SBRT, and would result in notable therapeutic effect.

• Journal of Food Hygiene and Safety
• /
• v.34 no.4
• /
• pp.361-366
• /
• 2019

In this study, microbial contamivation semisulcospira libertine and effect of sedimentation treatment of major bacterial and fungal pathogens were investigated. The total aerobic bacteria, coliforms, Escherichia coli, Staphylococcus aureus, and yeast and mold present in raw and water-dipped Semisulcospira libertine were enumerated using the standard plate count methods on using the standard plate method on potato dextrose agar (PDA), 3M Petrifilm for coliforms / E. coli, 3M Petrifilm for S. aureus, and plate count agar (PCA), respectively. In analysis of microbial contamination of raw Semisulcospira libertine, the total aerobic bacteria, coliforms, and yeast and mold were monitored as 6.40, 2.70, and $6.79{\log}_{10}CFU/g$, respectively. Both E. coli and S. aureus were not detected (detection limit: 10 CFU/g). However, Semisulcospira libertine dipped in ground water for 3 hours had higher contamination levels of all natural indigenous microorganisms than raw Semisulcospira libertine. Especially, E. coli was detected as $2.46{\log}_{10}CFU/g$ in the ground water-dipped Semisulcospira libertine. The total aerobic bacteria in the ground water-dipped Semisulcospira libertine was not significantly reduced (p>0.05) compared to that in the raw Semisulcospira libertine. Moreover, coliforms were significantly increased (p>0.05) in all water-dipped Semisulcospira libertine. Only fungi were slightly reduced (less than 0.2 log) (p>0.05) in the tap water-dipped Semisulcospira libertine by comparison with the raw Semisulcospira libertine. The results of this study suggest that the use of chemical sterilizing agents and other physical methods in the washing stage will be necessary for the microbial reduction in raw Semisulcospira libertine because the use of sediment removal treatment by ground or tap water did not affect the microbiological safety of the raw Semisulcospira libertine.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.172-193
• /
• 2013

This study examines the production techniques and raw materials shown in the Korean dried-lacquer statues of Buddha through a careful observation of the Seated Dried-lacquer Bodhisattva Statue from the late Goryeo Dynasty which is currently possessed by Okura Museum of Art in Tokyo. As a method of study, the X-ray data and the results from a field survey were combined to analyze the production techniques and the characteristics of raw materials. Based on this analysis, a hypothesis was established on the production process and verified through a reenactment of the actual production process. Then, the characteristics of the techniques applied to each process and the raw materials were recorded in detail. Specifically, the dried lacquer techniques and the raw materials were estimated based on the results of naked-eye observation in comparison with the literature, especially the records of "Xiu Shi Lu" written by Huang Cheng of the Ming Dynasty which is considered as 'the textbook of lacquer techniques.' The raw materials used in the production of the traditional Korean lacquerware inlaid with mother-of-pearl were also referenced. As a result, it was found that the features of production techniques and the raw materials found in the Statue at Okura Museum of Art have many similarities with those of the Seated Dried-lacquer Statue of Lohan (Arhat) from Yuanfu 2 Nian Ming (1098) of the Song Dynasty which is currently at the Honolulu Museum of Art. In particular, the similarities include that the interior of the statue being vacant because the clay and the wood core were not replaced after being removed from the prototype, that the complete form was made in the clay forming stage to apply the lacquer with baste fiber fabric, that the clay and the wood core were removed through the bottom of the statue, and that the modeling stage was omitted and the final coat over the statue is very thin. Additionally, decorating with ornaments like Bobal and Youngrak made of plastic material was a technique widely popular in the Song Dynasty, suggesting that the Seated Dried-lacquer Bodhisattva Statue in Okura Museum of Art was greatly affected by the production techniques of the Dried-lacquer Buddha Statue from the Song Dynasty. There is no precise record on the origin and history of the Korean Dried-lacquer Buddha Statues and the number of existing works is also very limited. Even the records in "Xuanhe Fengshi Gaoli Tujing" that tells us about the origin of the Dried-lacquer Buddha Statue from the Yuan Feng Period (1078~1085) do not indicate the time of transmission. It is also difficult to trace the clear route of transmission of production techniques through existing Dried-lacquer Buddha Statues. Fortunately, this study could at least reveal that the existing Dried-lacquer Buddha Statues of Korea, including the one at Okura Museum of Art, have applied the production techniques rather differently from those used in the production of Japanese Datsukatsu Dried-lacquer Buddha Statues that have been known as the standard rule in making dried-lacquer statues of Buddha for a long time.