• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.4
• /
• pp.519-525
• /
• 2014

Purpose: On this study, we investigated the relationship between the kinetic visual acuity (KVA) and the dynamic stereoacuity and the effects of anisometropia with measuring KVA and the dynamic stereoacuity. Methods: For 63 adults (male 30, female 33), KVA and the dynamic stereoacuity were measured by using the kinetic visual acuity tester (KOWA AS-4A) and the Howard-Dolman test (H-D test) at distance 2.5 m after conducted full correction of subjects' refractive error respectly. Results: The means of KVA were $0.49{\pm}0.25$ for total subjects, $0.58{\pm}0.26$ for male, $0.40{\pm}0.22$ for female, and LogMAD (Log minimum angle of displacement) dynamic stereoacuities were $1.27{\pm}0.44$($28.44{\pm}25.03sec$ of arc) for total subjects, $1.28{\pm}0.44$($28.23{\pm}23.34sec$ of arc) for male, $1.27{\pm}0.45$($28.63{\pm}26.83sec$ of arc) for female. KVA showed a statistically significant difference between male and female (p=0.00), but dynamic stereoacuity was no significant difference (p=0.97). No significant correlation was present between KVA and dynamic stereoacuity (r=0.03). Also there were no significant differences in the dynamic stereoacuity of the three group which were classified according to the low, middle, high range of KVA (p=0.99). The anisometropia were less than 1 D and over 1 D when divided into two groups, KVA and dynamic stereoacuity showed no significant difference between each (p=0.11, p=0.99). There was no significant correlation between anisometropia and KVA (r=0.33), dynamic stereoacuity (r=0.18) but the correlation between KVA and anisometropia revealed more higer than between dynamic stereoacuity and anisometropia. Conculsions: The KVA for adults showed a significant difference between male and female and male was higher than female for KVA. The dynamic stereoacuity due to the KVA, the KVA and dynamic stereoacuity due to anisometropia were not significant differences between each and also were not great correlations.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.3
• /
• pp.1-12
• /
• 2019

A bridge is a structure constructed on water or in the air for convenient passage. Compared to other buildings, the building materials and structures of bridge required unique functions to cross the space. It depends on the productivity of the building, the level of science and technology, and the ecological environment of the building site. Also, it has important relationship with functions such as politics, military, economy, and life. Most of the academic research on bridges is focused on research in the field of bridge-building technology, so the study on the landscape aesthetics and history of bridges is lacking. Against this backdrop, the study will be valuable as a accumulation of both countries' understanding of bridge types, history and culture, as well as technical and aesthetic data, by analyzing the bridges located within the palaces of Korea and China. The research method is to analyze the bridge through field survey and literature analysis.. First, the bridges of royal palace of Korea and China are to be classified quantitatively as physical shapes, landscapes, and decorations by comparing the materials, forms, landscapes, and decorative culture of bridges. Second, characteristics, common points, and differences are extracted by classifying bridges of both countries. Also, the results are discussed based on the physical environment or cultural background. This would be worth cross-referencing in the building technology and aesthetics of the two countries. For the first important characteristics of result, main materials of Korean and Chinese palaces are stone. However, the bridge in China's royal palaces is also focused on wood. Second, in terms of form, the bridges in the royal gardens of Korea and China are all based on the beam bridge. However, the specific form, ratio, style of the beam bridge, and airspace of arched bridge are very different. Third, most of the connection methods are focused on the over bridge. It values the convergence with the surrounding landscape. Due to the difference in the area and location of water, the bridge in the Korean palace is more focused on the convergence of the surrounding buildings and plants, while the bridge in the Chinese palace is more concerned about the harmony of hydration. Fourth, the decoration places importance on the artistry and aesthetics of both the bridges in Korea and China. There is a difference in style in the same type of decoration due to culture.

• Journal of Periodontal and Implant Science
• /
• v.35 no.4
• /
• pp.1019-1037
• /
• 2005

The major goals of periodontal therapy are the functional regeneration of periodontal supporting structures already destructed by periodontal disease as well as the reduction of signs and symptoms of progressive periodontal disease. There have been many efforts to develop materials and therapeutic methods to promote periodontal wound healing. There have been increasing interest on the chitosan made by chtin. Chitosan is a derivative of chitin made by deacetylation of side chains. Chitosan has been widely studied as bone substitution and membrane material in periodontology. Many experiments using chitosan in various animal models have proven its beneficial effects. Tetracycline has been considered for use in the treatment of chronic periodontal disease and gingivitis. The aim of this study is to evlauate the osteogenesis of tetracycline blended chitosan membranes on the calvarial critical size defect in Sprague Dawley rats. An 8mm surgical defect was produced with a trephine bur in the area of the midsagittal suture. The rats were divided into five groups: Untreated control group versus four experimental group. Four types of membranes were made and comparative study was been done. Two types of non-woven membranes were made by immersing non-woven chitosan into either the tetracycline solution or chitosan-tetracycline solution. Other two types of sponge membranes were fabricated by immersing chitosan sponge into the tetracycline solution, and subsequent freeze-drying. The animals were sacrificed at 2 and 8 weeks after surgical procedure. The specimens were examined by histologic analyses. The results are as follows: 1. Clinically the use of tetracycline blended chitosan membrane showed great healing capacity. 2. The new bone formations of all the experimental group, non-woven and sponge type membranes were greater than those of control group. But, there was no significant difference between the experimental groups. 3. Resorption of chitosan membranes were not shown in any groups at 2 weeks and 8 weeks. These results suggest that the use of tetracycline blended chitosan membrane on the calvarial defects in rats has significant effect on the regeneration of bone tissue in itself. And it implicate that tetracycline blended chitosan membrane might be useful for guided tissue regeneration.

• The Journal of Korean Academy of Prosthodontics
• /
• v.19 no.1
• /
• pp.17-27
• /
• 1981

This study was conducted to determine the chemical composition and the mechanical properties of four commercially available low gold-based crown and bridge alloy produced in Korea. Four dental casting gold-silver-palladium alloys, i.e., A, B, C and D (code of alloys) were selected for the evaluation of chemical composition, ultimate tensile strength, elongation. values and Vickers hardness. The chemical composition of test specimens was analyzed by both emission spectrography and wet gravitation method with a 1.5gm of low gold ingot. The tensile properties and Vickers hardness was determined with cast specimens treated in following three conditions; as-cast, softening heat treatment and hardening heat treatment. The tensile testing bars were cast in accordance with the model designed by Gettleman and Harrison (1969) which was modified from the A. D. A. Specification No. 14 for dental chromium-cobalt casting alloy. Nine tensile test specimens were made from a split silicone mold for each of the test alloys to the size of 2.5mm in diameter and a gauge length of 10mm. All four alloys were handled in accordance with conventional methods used in Type III gold alloys. Ultimate tensile strength and elongation were measured on an Instron Universal Tensile Testing Machine (Model 1125, Japan) operated at a crosshead rate of 0.1cm/min. Elongation values were measured using Digital Measuring Microscope (MS-152, FUSOH, Japan). Vickers hardness was determined with a Vickers Hardness Tester (Model VKH-l, Japan) at a 1.0kg load on a mounted tensile test specimen. The following results were obtained from this study; 1. All tested alloys were composed of Au, Ag, Pd, Cu, Zn and Fe in common. The composition rate of gold for all four alloys was found in the range of $42{\sim}47$ weight % as shown below. Alloy A; Au 45%, Ag 40.2%, Pd 5.76%, others 9.04%. Alloy B; Au 47.1%, Ag 29.03%, Pd 6.98%, others 16.92%. Alloy C; Au 45%, .Ag 26.9%, Pd 6.83%, others 21.07%. Alloy D; Au 41.8%, Ag 34.4%, Pd 6.95%, others 16.85%. 3. The ultimate tensile strength of the four alloys was in the range of $31{\sim}82kg/mm^2$. The test results were shown in the below order from the highest value; As-cast condition; D, B, C, A. Softening heat treament; B, C, D, A. Hardening heat treatment; D, B, C, A. 4. The test :results of the elongation rate for each alloy were in the range of $0.5{\sim}18%$. The test results were shown in the below order from the highest value; As-cast condition; A, D, B, C. Softening heat treatment; A, C, D, B. Hardening heat treatment; C, D, B, A. 5. Vickers hardness for each of the four alloys was in the range of $120{\sim}230$. The test results were shown in the below order from the highest value; As-cast condition; C, B, D, A Softening heat treatment; D, B, C, A. Hardening heat treatment; D, A, C, B. 6. There were no differences in the physical properties between as-cast condition and softening heat treatment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.424-434
• /
• 2009

Statement of problem: Problems such as loosening and fractures of retained screws and fracture of implant fixture have been frequently reported in implant prosthesis. Purpose: Implant has weak mechanical properties against lateral loading compared to vertical occlusal loading, and therefore, stress analysis of implant fixture depending on its material and geometric features is needed. Material and methods: Total 28 of external hexed implants were divided into 7 of 4 groups; Group A (3i, FULL $OSSEOTITE^{(R)}$Implant), Group B (Nobelbiocare, $Br{\aa}nemark$ $System^{(R)}$Mk III Groovy RP), Group C (Neobiotec, $SinusQuick^{TM}$ EB), Group D (Osstem, US-II). The type III gold alloy prostheses were fabricated using adequate UCLA gold abutments. Fixture, abutment screw, and abutment were connected and cross-sectioned vertically. Hardness test was conducted using MXT-$\alpha$. For fatigue fracture test, with MTS 810, the specimens were loaded to the extent of 60-600 N until fracture occurred. The fracture pattern of abutment screw and fixture was observed under scanning electron microscope. A comparative study of stress distribution and fracture area of abutment screw and fixture was carried out through finite element analysis Results: 1. In Vicker's hardness test of abutment screw, the highest value was measured in group A and lowest value was measured in group D. 2. In all implant groups, implant fixture fractures occurred mainly at the 3-4th fixture thread valley where tensile stress was concentrated. When the fatigue life was compared, significant difference was found between the group A, B, C and D (P<.05). 3. The fracture patterns of group B and group D showed complex failure type, a fracture behavior including transverse and longitudinal failure patterns in both fixture and abutment screw. In Group A and C, however, the transverse failure of fixture was only observed. 4. The finite element analysis infers that a fatigue crack started at the fixture surface. Conclusion: The maximum tensile stress was found in the implant fixture at the level of cortical bone. The fatigue fracture occurred when the dead space of implant fixture coincides with jig surface where the maximum tensile stress was generated. To increase implant durability, prevention of surrounding bone resorption is important. However, if the bone resorption progresses to the level of dead space, the frequency of implant fracture would increase. Thus, proper management is needed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.4
• /
• pp.235-242
• /
• 2012

Purpose: The purpose of this study was to compare the fracture behavior of Zironia, glass infiltrated Alumina and PFM full crown system. Materials and methods: Fifteen crowns for each of 3 experimental groups (Zironia, glass infiltrated Alumina and PFM full crown) were made by the conventional method. The crowns mounted on the testing jig were inclined in 30 degrees to the long axis of the tooth and the universal testing machine was used to measure the fracture strength. Results: 1. The mean fracture strengths were $588.3{\pm}49.6MPa$ for zirconia system, $569.1{\pm}61.8MPa$ for PFM system and $551.0{\pm}76.5MPa$ for glass-infiltrated alumina system (P>.05). 2. The mean shear bond strengths were $25.5{\pm}5.6MPa$ for zirconia system, $38.9{\pm}5.0MPa$ for Ni-Cr alloy system and $39.4{\pm}5.1MPa$ for glass-infiltrated alumina system. 3. The chemical bonding was observed at interfaces between PFM or glass-infiltrated alumina and veneering porcelain, however, no chemical bonding was observed at interface between zirconia and veneering porcelain. Conclusion: With the study, the fracture strengths of PFM crown system had a higher fracture strength than conventional zirconia system crown and glass-infiltrated alumina crowns. and than the shear bond strengths glass-infiltrated alumina system had a higher shear bond strength than conventional PFM system and zirconia system.

• Journal of Gastric Cancer
• /
• v.5 no.1
• /
• pp.40-46
• /
• 2005

Purpose: Gastrointestinal stromal tumors (GISTs) are mesenchymal neoplasms of the gastrointestinal tract. GISTs are positive for the expression of c-Kit protein at immunohistochemistry, and their clinical presentations vary. This retrospective study was performed to evaluate the clincopathologic characteristics of GISTs and to define the prognostic factors. Materials and Methods: 40 patients who underwent a complete resection of a GIST during the period $1996\~2003$ at the Department of Surgery, Korea University College of Medicine, were studied. We divided them into low- and high-risk. groups by using tumor size and mitotic count: 23 cases were low risk, and 17 were high risk. Clinicopathologic features, immunohistochemical findings, and prognoses were compared between the low- and the high-risk groups. Results: The mean age of the 40 patients was $61.3\pm11.1$years, and the male-to-female ratio was 1：1.1. There was no significant difference in age and sex between the groups. A comparative analysis revealed tumor size, mitotic count, clinical symptoms, preoperative pathologic diagnosis, ulceration, and necrosis to be variables that had statistically significant differences between the high- and the low-risk groups. In the univariate analysis, tumor size, mitotic count, ulceration, necrosis, and abnormal endoscopic ultrasound findings were associated with disease-free survival, but in the multivariate analysis, mitotic activity was the only independent factor associated with disease-free survival. 8 patients had recurrences during the follow-up period, and four of them were treated with STI-571 (imatinib mesylate, $Gleevec^{(R)}$). The treated patients have survived until now; however, two of non-treated patients died from disease progression. Conclusion: Based on this study, tumor size, ulceration, and necrosis are significant factors affecting survival, and mitotic activity may be a useful prognostic marker. STI-571 may be used in an adjuvant setting because the drug has shown anticancer activity in patients with recurrence or metastasis.

• Journal of Gastric Cancer
• /
• v.5 no.3 s.19
• /
• pp.191-199
• /
• 2005

Background: Though infections of Helicobacter pylori (H. pylori) are closely associated with activation of host angiogenesis, the underlying mechanisms, as well as the strategy for its prevention, have not been identified. Here, we investigated a causal role of H. pylori infection in angiogenesis of gastric mucosa and a potent inhibitory effect of a gastric proton pump inhibitor (PPI) on the gastropathy. Materials and Methods: A comparative analysis of CD 34 expression in tissues obtained from 20 H. pylori-associated gastritis and 18 H. pylori-negative gastritis patients was performed. Expression of $HIF-1{\alpha}$ and VEGF were tested by using RT-PCR. To evaluate the direct effect of H. pylori infection on differentiation of endothelial HUVEC cells, we carried out an in vitro angiogenesis assay. Results: H. pyfori-associated gastritis tissues showed significantly higher density of $CD34^+$ blood vessels than did H. pylori-negative gastritis tissues, and the levels were well correlated with expressions of $HIF-1{\alpha}$. Conditioned media from H. pylori-infected gastric mucosal cells stimulated a tubular formation of HUVEC cells. We also found a significant inhibitory effect of PPI, an agent frequently used for H. pylori eradication, on H. pylori-induced angiogenesis. This drug effectively inhibited the phosphorylation of MAP kinase ERK1/2, which is a principal signal for H. pylori-induced angiogenesis. Conclusion: The fact that PPls can down-regulate H. pylori-induced angiogenesis suggest that anti-angiogenic treatment using PPI may be a preventive approach for H. pylori-associated carcinogenesis.

• Journal of Gastric Cancer
• /
• v.7 no.1
• /
• pp.1-8
• /
• 2007

Purpose: There has been increased the number of early gastric cancer and laparoscopy-assisted gastrectomy (LAG), due to early detection through mass screening program. We started the LAG in April 2004 and performed 119 cases of gastric cancer in 2005, so we report a surgical outcome compared with that of open gastrectomy (OG). Materials and Methods: 119 patients underwent LAG in 2005, and for open group, 126 patiens of early gastric cancer were selected sequentially from January 2005 to March 2005. We compared clinicopathologic characteristics, postoperative courses and complications between two groups. Results: There was no significant difference between age, a length of hospital stay, distal resection margin and a number of retrived lymph nodes. The operation time was longer in LAG group (239.2 vs 123.3 mins, P<0.001) and a diet progression was faster in LAG group (first flatus: 3.05 vs 3.70 days, SOW: 2.86 vs 3.22 days, liquid diet: 3.87 vs 4.19 days, soft diet: 4.84 vs 5.26 days, P<0.001). But there was no difference statistically in postoperative discharge date (7.73 vs 8.25 days, P=0.229). The additional requirement of analgesic injection was less frequent in LAG group (2.97 vs 4.92 times, P<0.001). The harvested lymph nodes were similar in both groups (23.9 vs 23.1, P=0.563). A complication rate was lower in LAG group (4.9% vs 9.5%), but there was no statistical significance (P=0.179). There was no mortality in both groups and no conversion to open gastrectomy in the LAG group. Conclusion: LAG can be performed safely and accepted in view of curative procedure in treatment of early gastric cancer. But we need the follow up of long-term period to evaluate the survival rate and recurrence, and a prospective randomized controlled study should be done to establish that LAG will be a standard operation for early gastric cancer.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.4
• /
• pp.746-753
• /
• 1998

Background : Cigarette smoking is closely related to both lung cancer and chronic obstructive pulmonary disease. The incidence of lung cancer is higher in patients with obstructive ventilatory impairment than in patients without obstructive ventilatory impairment regardless of smoking. So, obstructive ventilatory impairment is suspected as an independent risk factor of lung cancer. Methods: For the evaluation of the role of obstructive ventilatory impairment as a risk factor of lung cancer, a total of 73 cases comprising 47 cases of malignant and 26 benign solitary pulmonary nodule were analyzed retrospectively. A comparative study of analysis of forced expiratory volume curves and frequencies of obstructive ventilatory impairment were made between cases with malignant and benign nodules. Results: In comparison of vital capacity and parameters derived from forced expiratory volume curve between two groups. VC, FVC and $FEV_1$ were not significantly different. whereas $FEV_1/FVC%$ and FEF 25-75% showed a significant decrease in the cases with malignant nodule. The frequency of obstructive ventilatory impairment determined by pulmonary function test was significantly higher in the cases with malignant nodule(23.4%) than in benign nodule(3.8%). When the risk for lung cancer was examined by the presence or absence of obstructive ventilatory impairment using the logistic regression analysis, the unadjusted relative risk for the lung cancer of obstructive ventilatory impairment was 17.17. When the effect of smoking and age were considered, the relative risk was to 8.13. Conclusion: These findings suggest that an obstructive ventilatory impairment is a risk factor of lung cancer.