• Geomechanics and Engineering
• /
• 제12권6호
• /
• pp.935-948
• /
• 2017

An experimental program was conducted to investigate the effects of the static compaction pressure, cement content, water/cement ratio, and curing time on unconfined compressive strength (UCS) of the cement treated sand. UCS were conducted on samples prepared with 4 different cement/sand ratios and were compacted under the lowest and highest static pressures (8 MPa and 40 MPa). Each sample was cured for 7 and 28 days to observe the impact of curing time on UCS of cement treated samples. Results of the study showed the unconfined compressive strength of sand increased as the cement content (5% to 10%) of the cement-sand mixture and compaction pressure (8 MPa to 40 MPa) increased. UCS of sand soil increased 30% to 800% when cement content was increased from 2.5% to 10%. Impact of compaction pressure on UCS decreased with a reduction in cement contents. On the other hand, it was observed that as the water content the cement-sand mixture increased, the unconfined compressive strength showed tendency to decrease regardless of compaction pressure and cement content. When the curing time was extended from 7 days to 28 days, the unconfined compressive strengths of almost all the samples increased approximately by 2 or 3 times.

• 한국제4기학회지
• /
• 제9권1호
• /
• pp.43-60
• /
• 1995

The Kanweoldo Deposit in the Cheonsoo Bay western coast of Korean Peninsula is considered to be influenced by severe freezing condition under cold humid environment of the last glacial age. The evidence of severe freezing in the some upper part of the fine-grained Kanweoldo Deposit is characteristically irregular wavy la-mellar structure with the interval of 2∼8mm. In particular lamina show very compacted fabrics composed of rounded or spheroidal discrete aggregates covered by silt caps. Such laminar structure and associated micro-fabrics might owe to soil freezing such as ice segregation in lens form cryophoresis pressure from growing ice and disturbance by frost-creep. Furthermore pedogenesis of cold-humid type such as gleyzation or peseudo-gleyzation also might af-fect the kanweoldo Deposit in the priod of severe cold-humid cli-mate of the Wrm. The Kanweoldo sediment and organic remnant(16,708 B.P. with error limit of 250 years) affected by severe cryogenic activities sug-gest that the paleoclimate of Late Wrm in Korea might be so cold and humid as to engender the cryogenic structure in subaerial silty and sandy silt deposits.

• 한국도로학회논문집
• /
• 제8권3호
• /
• pp.115-127
• /
• 2006

현재 중부내륙 고속도로 시험도로(test road)에는 환경하중에 대한 도로 포장체의 환경적인 거동 특성을 파악하기 위하여 다져진 노상토에 WCR형태의 함수량계로 측정되는 체적 함수량이 현장 밀도의 영향등으로 부정확하게 예측되는 경향을 나타내고 있다. 따라서 본 연구에서는 흙의 특성과 현장 밀도를 고려하여 현장에 적합한 함수량 보정을 실내 및 현장시험을 각각 실시하고 이를 토대로 보정방정식을 제안하였다. 연구 결과 보정된 함수량은 현장의 측정치에 근접하게 판명되었다. 따라서 WCR을 활용하여 다짐된 노상토 지반의 체적 함수량을 측정시 사용된 흙의 종류 및 다짐조건 등이 고려되어야 한다.

• Geomechanics and Engineering
• /
• 제10권2호
• /
• pp.155-174
• /
• 2016

A total of 104 laboratory model tests on a square footing subjected to eccentrically inclined loads supported by sand reinforced with randomly distributed polypropylene fibers were conducted in order to compare the results with those obtained from unreinforced sand and with each other. For conducting the model tests, uniform sand was compacted in a test box at one particular relative density of compaction. The effect of percentage of reinforcement used, thickness of the reinforced layer, angle of inclination of load to vertical and eccentricity of load applied on various prominent factors such as ultimate load, vertical settlement, horizontal deformation and tilt were investigated. An improvement in ultimate load, vertical settlement, horizontal deformation and tilt of foundation was observed with an increase in the percentage of fibers used and thickness of reinforced sand layer under different inclinations and eccentricities of load. A statistical model using non-linear regression analysis based on present experimental data for predicting the vertical settlement ($s_p$), horizontal deformation ($hd_p$) and tilt ($t_p$) of square footing on reinforced sand at any load applied was done where the dependent variable was predicted settlement ($s_p$), horizontal deformation ($hd_p$) and tilt ($t_p$) respectively.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.158-167
• /
• 2008

The quality control of compacted fills has been carried out by evaluating relative densities and coefficients of soil reaction. These measures have several limitations regarding repeatability and reliability of field measurements, and difficulties to use in the fills including large grain size as gravels and boulders. Also, the density is not directly related to the design parameter such as resilient modulus. A preliminary investigation for the usage of the stiffness as a control measure has been carried out. In the laboratory, the stiffness (P-wave velocity) was measured during compaction tests. The stiffness at the optimal moisture content was proposed to use a target control parameter likewise maximum dry density. A field method to match the target stiffness was also proposed by considering easiness of the method and availability of equipment. The most phenomenal feature of the method is that the control parameter (stiffness) is closely related to resilient modulus and can be consistently used from the design stage to the field control during construction.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.613-620
• /
• 2002

Sand Compaction Pile(SCP) is a soil improvement method that a sand charge is introduced into the pipe, and the pipe is withdrawn part away while the sand pile is compacted and its diameter is enlarged. The sand used in this method should be of good quality. In Korea, crushed stone and washed sea sand are used frequently in SCP. However, use of these materials is restricted because of environmental problem and deficiency of supply. In the copper smelting process, about 0.7 million tons of copper slag are produced in Korea. The range of particle size distribution of copper slag is from 0.15mm to 5mm, so it can be a substitute for sand, and the relatively high specific gravity compared with the sand, is its characteristic. Copper slag is hyaline and so stable environmentally that in foreign country, such as Japan, Germany etc., it is widely used in harbor, revetment and offshore structure construction works. Therefore, in this study, the several laboratory tests were peformed to evaluate the applicability of copper slag as a substitute for sand of SCP. From the mechanical property test, the characteristics of sand and copper slag were compared and analyzed, and from laboratory model test, the strength of composite ground was compared and analyzed by monitoring the stress and ground settlement of clay, SCP and copper slag compaction pile. Specially, this study focused on the application of copper slag as sand substitute in SCP pilot tests based on laboratory tests results.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.131-137
• /
• 2008

SCP(Sand Compaction Pile) method that forms a composite ground by driving compacted sand piles into the soft ground. This method is one of the soil improvement techniques for reinforcing and strengthening soft ground deposits. This thesis describes the investigation on the behavior of soft ground reinforced with SCP by low improvement ratio. Direct shear test and consolidation test carried out to verified behavior of composite ground reinforced with SCP. Test results were discussed with reference to the amount of consolidation settlement, variation of shear resistance with area replacement ratio and effect of the stress concentration. And, laboratory model loading test carried out to verified the effect of the location and failure mode of reinforced embankment. Residual shear strength varies with the area replacement and constrict load in the low replacement ratio. Calculated stress concentration ratio overestimate than proposed valve by experimental, theoretical and analytical method. As regards the location, improving right below of the top of the slope was more effective than below of the toe of the slope. This thesis carried out to obtain fundamental information of behavior of the composit ground. Hereafter, centrifuge test that reproduce stress state of the in-situ must be necessary through the further study about pile penetration, reinforce position and construct time.

• Geomechanics and Engineering
• /
• 제18권3호
• /
• pp.247-258
• /
• 2019

Soil strength and failure surface geometry directly influence magnitudes of passive earth thrust acting on geotechnical retaining structures. Accordingly, it is expected that as long as the shape of the failure surface geometry and strength parameters of the backfill are known, magnitudes of computed passive earth thrusts should be highly accurate. Building on this premise, this study adopts conventional method of slices for calculating passive earth thrust and combines it with equations for estimating failure surface geometries based on in-situ stress state and density. Accuracy of the proposed method is checked using the results obtained from small-scale physical retaining wall model tests. In these model tests, backfill was prepared using either air pluviation or compaction and different backfill relative densities were used in each test. When the calculated passive earth thrust magnitudes were compared with the measured values, it was noticed that the results were highly compatible for the tests with pluviated backfills. On the other hand, calculated thrust magnitudes significantly underestimated the measured thrust magnitudes for those tests with compacted backfills. Based on this observation, a new approach for the calculation of passive earth pressures is developed. The proposed approach calculates the magnitude and considers the influence of locked-in stresses that are the by-products of the backfill preparation method in the computation of lateral earth forces. Finally, recommendations are given for any geotechnical application involving the compaction of granular bodies that are equally applicable to physical modelling studies and field construction problems.

• 한국지반공학회지:지반
• /
• 제11권1호
• /
• pp.113-126
• /
• 1995

점성토의 변형특성을 연구하기 위하여 공진주(RC)시험과 비틀전단(75)시험을 저변형률 및 중간 변형률하에서 실시하여 변형률의 크기,진동주파수,하중반복회수의 영향을 살펴보았다. 소 성지수가 이들의 영향을 평가하는데 중요한 변수임을 알 수 있었다. 실험에 사용된 시료로는 불 교란 실트 및 점토와 실험실에서 다져진 노상토를 사용하였다. 선형한계변형률이하에서 전단탄 성계수는 하중반복회수와 변형률의 크기에 영향을 받지 않았으며, RC시험에서 얻은 최소감소비가 1.1%에서 1.7%영역에서 존재하였다. 점성토의 선형한계변형률은 구속압과 소성지수에 따라 증가하였으며 사질토와 비교하여 넘은 선형영역을 보였다. 반복한계변형률이상의 변형률하에서는 전단탄성계수는 하중반복회수에 따라 감소하였지만 감쇠비는 영향을 받지 않았다. 진동주파수의 영향에 의해 RC시험에서 얻은 점성토의 전단탄성계수와 감쇠비는 RC시험결과보다 컸다. 전단탄성계수는 진동주파수의 대수증가에 따라 선형적으로 증가하였고 감쇠비의 경우 2Hz이하의 저주파수영역에서는 영향을 받지 않았다.

• 지구물리
• /
• 제4권1호
• /
• pp.1-10
• /
• 2001

많은 유형문화재들이 과학적인 보존, 보수 없이 손상되어지고 있다. 이에 국내 유형문화재의 보수?보존 방안 대책과 복원에 대한 설계 자료로의 이용을 목적으로 익산미륵사지 서탑을 대상으로 지구물리학적 탐사를 적용하였다. 전기비저항, 탄성파, GPR탐사 등이 지구물리학적 탐사를 6개 측선에서 시행하여 서탑의 천부구조 영상화를 통해 지반특성과 구조적 안정성을 조사하였다. 전기비저항탐사에 의해 저비저항대 부분이 현재 탑이 남서쪽으로 기울어진 현상에 영향이 있는 것으로 해석된다. 탄성파 굴절법탐사와 GPR탐사에서 다짐층과 원지반층의 경계가 약 3.3～3.5m로 나타남이 일치하고 있으며 다짐층은 탑을 중심으로 넓게 분포하는 것이 아니라 북쪽으로 치우쳐 탑의 면적보다 작게 조서오딘 것으로 판단되고 현재 탑이 남서쪽으로 약간의 기울임을 보이는데 여기에는 지반강화대책이 필요한 것으로 판단된다.