• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.12
• /
• pp.1857-1864
• /
• 2013

In 21 century, it is difficult to define the limit of home automation, Recently, based on the advanced digital communication technology and necessity, The scope of the home automation has widened to home energy management, integrated reading of home and home health care etc. beyond the existing home automation. However, those methodologies reduce the efficiency and economy, and make it harder to realize a compact home automation because those methodologies are proposed independently without a unified standard. Therefore, this paper investigates and analyzes these methodologies, and then proposes an advanced home automation system that enables a compact design and improves the efficiency and economics of the home automation system based on the analyzed result.

• Journal of Advanced Navigation Technology
• /
• v.17 no.5
• /
• pp.475-483
• /
• 2013

In this paper, the performances of modeling methods for combining corrections from multiple reference stations for network user were compared and analyzed. The longer the distance between reference station and user is, the more the GPS errors are decorrelated. Based on this point, multiple corrections from reference stations which is constituting a network should be combined properly to be applied for user observation to eliminate GPS errors. There are many widely used conventional modeling methods and they are applied for Compact Network RTK users and user position accuracy is predicted by using residual errors in observation of user. Compact Network RTK is a technique of generating corrections which was developed by Seoul National University. As a result, the horizontal and vertical accuracies were within about 5 cm and 7 cm respectively with 95 % probability for all conventional modeling methods. In addition, we analyzed condition for reference station constellation for modeling method using height information.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1693-1700
• /
• 2010

Field data acquisition is faster in PDA-based mobile environment compared with document-based data acquisition, ensuring accurate data acquisition. However, portable DAQ systems of mobile environment can effectively replace DAQ systems embedded in computers but are less capable than DAQ systems embedded in computers and usually used in environments different from computers, causing noises whose cause are characteristics not certainly known. Therefore, in order to collect mobile-based field data, CompactFlash card-based hardware prototypes are suggested and mobile applications which guarantee acquisition of large amount of data with low hardware capability are performed. According to the test, mobile environments such as PDA were proved to be an effective way of collecting large amount of data. However, hardware performance has major effects on sequential data acquisition in mobile environments regardless of data display.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.4077-4085
• /
• 2013

The purpose of this study is to analyze relationships between compact city development and residents' shopping trips in Seoul. Compact city planning factors are classified into land use and traffic environment. The main data source used for this research is 2006 Household Travel Survey data, then a statistic analysis was carried out by applying random intercept logit model. Analysis shows that a high level of residential density increases residents' local shopping. Also, a high level of residential density and land use mix results in more uses of public transportation, bicycle and walking for shopping. Also, more access to public transportation leads to more use of public transportation for shopping. Therefore, compact city development will have a positive impact on activating the use of public transportation, bicycle and walking for shopping.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2351-2358
• /
• 2014

In this paper, a design method for a compact CPW-fed slot antenna using SRRs is studied. The structure of the proposed slot antenna is a rectangular slot antenna loaded with SRR conductors inside the slot to reduce the antenna size. Optimal design parameters are obtained by analyzing the effects of the gap between the SRR conductors and slot, and the width of the SRR conductors on the input VSWR characteristic. The optimized compact slot antenna operating at 2.45 GHz band is fabricated on an FR4 substrate with a dimension of 36 mm by 30 mm. The length of the proposed compact slot antenna is reduced to 14.3% compared to that of a conventional rectangular slot antenna. Experiment results show that the antenna has a desired impedance characteristic with a frequency band of 2.4-2.49 GHz for a VSWR < 2, and measured gain of 2.3 dBi at 2.45 GHz.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3140-3145
• /
• 2012

In this paper, a design method for a compact slot antenna fed by a coplanar waveguide (CPW) is studied. A T-shaped tuning stub is inserted inside a narrow rectangular slot and the slot is impedance matched to the CPW feedline by adjusting the width, length, and position of the stub. The resonance frequency is adjustable by the slot length and the antenna size can be reduced by bending the slot. The resonance frequency and impedance matching property of the compact slot antenna are similar to those of the half-wavelength slot antenna, which enables one to design compact antenna of this type with ease. A compact slot antenna for 2.45-GHz ISM band is designed, fabricated on an FR4 substrate (dielectric constant of 4.4 and thickness of 0.8 mm), and experimentally tested. The measured results agree well with the simulations, which confirms the validity of this study. The fabricated compact slot antenna shows an impedance bandwidth of 200 MHz(2.32-2.52 GHz) for a VSWR < 2, which is suitable for 2.45-GHz ISM band (2.4-2.48 GHz). The measured radiation patterns show ${\infty}$-shaped directional pattern in the E-plane and nearly omni-directional pattern in the H-plane with a peak gain of 2.0 dBi, which are similar to those of a monopole antenna. The proposed antenna is expected to be suitable for the applications as antennas for WLAN, RFID, and mobile handset.

• Membrane Journal
• /
• v.3 no.2
• /
• pp.51-59
• /
• 1993

해수는 약 3.5%의 여러가지 염류가 용해되어 있는 수용액으로 이러한 용존염류를 제거하여 담수를 얻는 방법으로는 증발법, 냉동법 등과 같이 물의 상변화를 이용하는 방법과 역삼투압법, 전기투석법과 같이 분리막을 이용하여 압력차, 전위차로 분리하는 방법이 실용화되어 있다. 이중에서 역삼투압법은 상변화가 필요없기 때문에 소요에너지가 적고 장치가 Compact하여 설치비 및 설치부지가 적게 든다는 이점을 가지고 있으며, 특히 최근에는 우수한 분리막의 개발 및 공정기술의 향상으로 다른 공정들에 비해 경쟁력을 갖게 되었다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.06a
• /
• pp.57-81
• /
• 1993

해수는 약 3.5%의 여러가지 염류가 용해되어 있는 수용액으로 이로한 용존염류를 제거하여 담수를 얻는 방법으로는 증발법, 냉동법 등과 같이 물의 상변화를 이용하는 방법과 역삼투압법, 전기투석법과 같이 분리막을 이용하여 압력차, 전위차로 분리하는 방법이 실용화 되어 있다. 이 중에서 역삼투압법은 상변화가 필요없기 때문에 소요에너지가 적고 장치가 COMPACT하여 설치비 및 설치부지가 적게 든다는 이점을 가지고 있으며, 특히 최근에는 우수한 분리막의 개발 및 공정 기술의 향상으로 다른 공정들에 비해 경쟁력을 갖게 되었다.

• Restorative Dentistry and Endodontics
• /
• v.30 no.6
• /
• pp.442-449
• /
• 2005

The purpose of the present study was to evaluate the relationship between the amount of cuspal deflection and linear polymerization shrinkage in resin composite and polyacid modified resin composite, For cuspal defelction and shrinkage measurement, Dyract AP, Compoglass F, Z100, Surefil. Pyramid, Synergy Compact, Heliomolar and Heliomolar HB were used. For measuring polymerization shrinkage, a custom made linometer (R&B, Daejon, Korea) was used The amount of shrinkage among materials was compared using One-way ANOVA analysis and Tukey's test at the $95\%$ of confidence level For measuring cuspal deflection of teeth, standardized MOD cavities were prepared in extracted maxillary premolars. After a self-etching adhesive was applied, cavities were bulk filled with one of the felling materials. Fifteen teeth were used for each material. Cuspal deflection was measured by a custom made cuspal-deflection measuring device. One-way ANOVA analysis and Tukey's test were used to determine differences between the materials at the $95\%$ of confidence level, Correlation of polymerization shrinkage and cuspal deflection were analyzed by regression analysis. The amount of polymerization shrinkage from least to greatest was Heliomolar, Surefil < Heliomolar HB < Z100, Synergy Compact < Dyract AP < Pyramid, Compoglass F (p<0.05). The amount of cuspal deflection from least to greatest was Z100, Heliomolar, Heliomolar HB, Synergy Compact Surefil < Compoglass F < Pyramid, Dyract AP (p < 0.05). The amount of polymerization shrinkage and cuspal deflection showed a correlation (p<0.001).

• Journal of the Korea Convergence Society
• /
• v.8 no.12
• /
• pp.23-29
• /
• 2017

This paper introduces the mold technology for the development of ultra-compact package of less than 1mm, and also analyze the error pattern of the results using this mold technology. The existing ultra-small mold structure was one-piece, which caused the surface of EDM to be rough and increase the error rate. This has been an obstacle to further reducing the size of the mold. On the other hand, the proposed mold technology tries to overcome the limitation of the one-piece type by using the prefabricated type method. This paper also classify defect patterns in the results of the proposed mold structure and analyze the occurrence probability of each pattern to use as a basic data to develop a detector.