• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.703-710
• /
• 2014

The following is the study result of herbal tea roasted at different temperatures between $80{\sim}140^{\circ}C$. Depending on treatment temperature the water content decreased, some carbonization occurred and crude ash content relatively increased. Also crude protein and crude fat decreased little. Solid elution rate of herbal tea showed 0.15~0.32%(w/w) and the rate of solid elution decreased with higher roasting temperature. There was no big change in $80{\sim}110^{\circ}C$ treatment section but the solid elution decreased rapidly in $110{\sim}140^{\circ}C$ section. The reason for decreasing solid elution rate at higher treatment temperature is because the compact inner tissue makes elution difficult. Benzopyrene content (0.29~0.51ppb) showed a tendency to increase with higher treating temperature. From this result, the $B({\alpha})P$ content differed depending on the treatment temperature and raw materials. In case of roasting, the actual inside temperature is around $200^{\circ}C$ but since the surface temperature of the roaster reaches around $2000^{\circ}C$ some portion of $B({\alpha})P$ content was presumed to be produced from the area that came in contact with this surface. When the processing which is a main component of food carbohydrate, protein, fat reason despite serve heat treatment as a whole is to be detected even though the $B({\alpha})P$ in this way is considered to be.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.5
• /
• pp.489-500
• /
• 2004

Statement of problem: The use of zirconia prostheses fabricated with CAD/CAM system is on an increasing trend in dentistry. However, evaluation of the fit related to internal relief and marginal reproducibility of zirconia has not been reported. Purpose : This study was to evaluate the fit related to internal relief and marginal reproducibility of zirconia core fabricated with CAD/CAM system. Materials and methods: The evaluation was based on 30 zirconia cores and 5 IPS-Empress2 cores. Zirconia cores were fabricated in different conditions of internal relief(0, 10, 20, 30, 40 and $50{\mu}m$), and IPS-Empress2 cores were fabricated in accordance with the manufacturer's instructions. Before cementation, the marginal discrepancies or cores were measured on metal die. And then, each core was cemented to stone die, embedded in an acrylic resin and sectioned in two planes(mesiodistally and labiopalatally). The internal gaps were measured at the margin and axial surface. Measurements for the marginal discrepancies, the internal marginal gaps and the internal axial gaps were performed under a measuring microscope(Compact measuring microscope STM5; Olympus, Japan) at a magnification of ${\times}100$. In addition, the marginal conagurations of metal die, zirconia core and IPS-Empress2 core were examined with SEM(S-2700, Hitachi, Japan). Results : Within the limits of this study the results were as follows. 1. Compared with IPS-Empress2 cores, the marginal discrepancies of zirconia cores had no significant differences. the internal marginal gaps were statistically smaller and the internal axial gaps were statistically larger in each condition of internal relief. 2. The marginal discrepancies and the internal marginal gaps of zirconia cores had no significant differences related to the conditions of internal relief(P>0.05). 3. The internal axial gaps of zirconia cores with $0{\sim}20{\mu}$m for internal relief were significantly larger than that with $50{\mu}m$ (P<(0.0001). 4. SEM micrographs showed favorable marginal reproducibility of zirconia core and smooth texture on the milling surface. Conclusion: The marginal discrepancy and the internal gaps of zirconia core were clinically acceptable and the milling surface was showed smooth texture. For fabrication of the durable esthetic restoration, further investigations on complex design of core, milling accuracy, compatability of enamel porcelain and porcelain firing seems to be needed.

• Journal of Biosystems Engineering
• /
• v.39 no.2
• /
• pp.122-133
• /
• 2014

Purpose: This study was to develop an effective process for fabricating biocompatible calcium phosphate powders (CPPs) using horse bones, and to investigate the characteristics of them. Methods: The characteristics of horse bone powders (HBPs) were investigated according to the different osseous tissue types (compact bone and cancellous bone), bone types (spine and tibia), pretreatment methods (cold water, $H_2O_2$, and hot water), sintering time (4, 8 and 12h), and sintering temperature (600, 900, 1100 and $1300^{\circ}C$). In addition, the grinding methods were compared based on the wet grinding (ball mill) and dry grinding (blade grinder) method to make it as powders. Finally, their cytotoxicity and cell viability were checked. Results: Regardless of the types of osseous tissues and bones, HBPs were well fabricated as biocompatible CPPs. It was also found that the pretreatment methods did not influence on the resultants, showing well-fabricated HBPs. Considering the processing time, the hot water method was the most suitable compared to other pretreatment methods. Further, 12h-sintering time was sufficient to remove residual organic compounds. The sintering temperatures greatly affected the properties of bone powders fabricated. The x-ray diffraction (XRD) peak of horse bone sintered at $600^{\circ}C$ was most closed to that of hydroxyapatite (HA). Our bioactivity study demonstrated that the HBPs fabricated by sintering horse bones at $1300^{\circ}C$ showed the best performance in terms of cell viability whereas the HBPs $1100^{\circ}C$ showed the cytotoxicity. Conclusions: Using various types of horse bone tissues, biocompatible CPPs were successfully developed. We conclude that the HBPs may have a great potential as biomaterials for various biological applications including bone tissue engineering.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.2
• /
• pp.199-210
• /
• 2000

We present the results from narrow-band spectrophotometry of Comet Hale-Bopp (C/1995 O1) near perihelion obtained at Sobaeksan Optical Astronomy Observatory 61cm telescope equipped with PM 512 CCD camera(512$\times$512, 0.5"/pixel) and narrow-band filter set for the comet on 19 nights from February 21 to May 1, 1997. We discuss molecular emission band morphology and photometric behavior of Comet Hale-Bopp. The morphology of CN band shows more symmetric light distributions than $C_2$ or $C_3$ bands. On other hand, $C_2$ and $C_3$ band have more compact light distributions than CN band. Similar to wide-band image, molecular band morphology shows spiral structures at the core of the comet. The CN surface brightness variation with changing heliocentric distance shows difference from those of $C_2$ and $C_3$. The brightness, however, of these molecular bands near perihelion shows previously known 7day period light variations.

• Applied Microscopy
• /
• v.31 no.2
• /
• pp.109-116
• /
• 2001

Safflower has been cultivated in Korea and thought to have excellent effects on bone in oriental medicine and folk remedy and has been taken for a long time. Safflower is thought to be helpful for the development and sustenance of bones according to the result of recent assay of its components. Otherwise, any reliable experimental data have not been suggested so far. We have carried out this study to examine the prophylactic effects of safflower-seed-powder on the prevention of osteoporosis induced by the ovariectomy 12 Weeks-old Sprague-Dawley rats weighing about 230 g was kept in the experimental condition and used in this study. Animals were taken 0.3 g of safflower-seed-powder once a day for 1, 3, 5, and 7 weeks after ovariectomizing both ovaries and observed the fine structure of tibia. Tissues were fixed with traditional SEM preparation methods and decalcified for 10 hours with 10% nitric acid and dehydration, drying, and gold-coating were followed by the routine procedures and observed with scanning electron microscope (Hitachi, S-450). Loss of bone was started just after ovariectomy and thickness of bone from the medullary cavity to the compact bone was reduced and the extension of medullary cavity was serious in the control group of 7 weeks. Experimental groups taken safflower-seed-powder showed similar findings from 1 week to 7 weeks. These results suggest that the safflower-seed-powder is thought to be efficient for the prevention of osteoporosis owing to the deficiency of female sex hormone.

• Applied Microscopy
• /
• v.40 no.3
• /
• pp.155-162
• /
• 2010

Bone is a hierarchically structured composite material which has been well studied by the materials engineering community because of its unique structure and mechanical properties. Bone is a laminated organic-inorganic composite composed of primarily hydroxyapatite, collagen and water. The main mineral that gives bone's hardness is calcium phosphate, which is also known as hydroxyapatite. Light microscopy (LM) and transmission electron microscopy (TEM) were used to study the structure of femurs from chicken and rabbit. The elemental analysis was used to search variation in the distribution of calcium, potassium and oxygen in the femur. Current investigation focused on two structural scales: micro scale (arrangement of compact bone) and nano scale (collagen fibril and apatite crystals). At micro scale, distinct difference was found in microstructures of chicken femur and rabbit femur. At nano scale, we analyzed the shape and size of apatite crystals and the arrangement of collagen fibril. Consequently, femurs of chicken and rabbit had very similar chemical property and structures at nano scale despite of their different species.

• Journal of Veterinary Clinics
• /
• v.32 no.3
• /
• pp.239-242
• /
• 2015

Trypanorhych plerocercoids of Nybelinia surmenicola are described in the common squid, Todarodes pacificus, through the use of light and scanning electron microscopy. Upon dissection, out of 200 common squid from the Korean coastal water, 54 (27%) were found infected with N. surmenicola plerocercoids. Mean N. surmenicola abundance was 2.28 per squid. Body length and width ranged from $6.1-11.1(8.05){\times}2.0-2.2(2.1)mm$. Bothria are broad, bean-shaped, measured $2.4-2.8{\times}0.62-0.69(2.65{\times}0.64)mm$. The short and long tentacular armatures which are spirally arranged are homeoacanthous and homeomorphous uncinate hooks and consist of compact rose-thorn-shaped tentacular hooks. The tentacle sheaths are coiled in a spiral near the bulbs. Four large bothria are separated by filiform microtriches along the bothridal margins. This is the first description of the plerocercoids of N. surmenicola in the common of squid from the Korean coastal waters.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.5
• /
• pp.412-423
• /
• 2000

By using the relation between stress intensity factor and AE parameter, new approach method for assessing the crack length and detectability of crack was proposed. Laboratory experiment was carried out to identify AE characteristics of fatigue cracks for compact tension specimen. The relationship between a stress intensity factor and AE signals activity as well as conventional AE parameter analysis was discussed. As a result, the features of specific parameter such as the length of crack growth the AE energy, the AE peak amplitude, and the cumulative AE hits, showed the almost same trend in their increase as the number of fatigue cycle increased. From the comparisons of peak amplitude and AE energy with stress intensity factor, it was verified that the higher stress intensity factors generated AE signals with higher peak amplitude and a larger number of AE counts. If we can get more reliable database for the relation between AE parameters and stress intensity factor, this approach will provide a good information for evaluating both the existence of crack and the minimum detectable size of crack.

• Journal of Life Science
• /
• v.30 no.4
• /
• pp.402-409
• /
• 2020

Nervous necrosis virus (NNV) contains a bi-segmented viral genome, RNA1 (3.4 kb, RdRp), and RNA2 (1.4 kb, capsid protein) in a small particle (25 nm). Despite its extremely compact size, NNV has caused serious damage by infecting approximately 120 fish species worldwide since it was first reported in the late 1980s. In order to minimize the damage caused by NNV infection and develop effective vaccines, it is necessary to understand the intra cellular signaling system according to NNV infection. NNV infection induces cell cycle arrest at the G1 phase via the p53-dependent pathway to use the cellular system for its replication. Otherwise, host cells recognize NNV infection through the RIG-1-like receptor (RLR) signaling pathway to control the virus and infected cells, and then ISGs required for antiviral action are activated via the IFN signaling pathway. Moreover, apoptosis of infected cells is triggered by the unfolded protein response (UPR) through ER stress and mitochondria-mediated cell death. Cell signaling studies on the NNV infection mechanisms are still at an early stage and many pathways have yet to be identified. Understanding the various disease-specific cellular signaling systems associated with NNV infection is essential for rapid and accurate diagnosis and vaccine development.

• The Plant Pathology Journal
• /
• v.19 no.1
• /
• pp.13-18
• /
• 2003

From 1996 to 1999, potato-growing areas in Korea were surveyed for identification and distribution of potato scab pathogens. Potato scab was widely distributed in the mass cultivation areas, especially in Jriu island, southern areas of Chonnam and Gyounggi provinces, and the alpine area of Gangwon province. Jeju island was the most affected area by this disease. A total of 55 Streptomyces strains were isolated from potato scab lesions, among which 40 strains were pathogenic on progeny tubers. Among the pathogenic strain, 21 strains were identified as previously described S. scabies, 7 Strains as S. turgidiscabies, and 5 Strains as S. acidiscabies, while 7 strains were observed as having distinct phenotypic properties. These strains were classified into six distinct clusters based on phenotypic characteristics and selected representative strains for each cluster. S. scabies (S33) had grey spores in a spiral chain. Mean-while, S. turgidiscabies (S27) had grey spores, S. acidiscabies (S71) had white spores, S. luridiscabiei (S63) had yellow-white spores, S. puniciscabiei (S77) had purple-red spores, and S. niveiscabiei (S78) had thin and compact white spores, all in a rectiflexuous chain. Pathogenicity was determined by the production of thaxtomin A and homologs of necl and ORFtnp genes. In TLC, representative strains S27, S71, S63, S77, and S78 produced a yellow band that co-migrated with the authentic thaxtomin A. However, thaxtomin A was not detected in chloroform extracts from oatmeal broth culture and Slice tuber tissue of S. luridiscabiei (S63) and S. puniciscabiei (S77) by HPLC analysis. In addition, no homologs of necl and ORFtnp genes in S. acidiscabies (S71), S. luridiscabiei (S63), S. puniciscabiei (S77), and S. niveiscabiei (S78) were detected by PCR and Southern hybridization analysis.