• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.5
• /
• pp.583-587
• /
• 2015

In this study, a half-duplex mutual communication device via human skin was developed. Frequency-shift keying (FSK) digital modulation and demodulation control were used to transmit and receive data. Data communication through the human body is an effective communication technique and has high-grade security characteristics. In addition, making contact is a natural instinct of humans. Transmitting data through the human body is currently a highly conspicuous technology, because recently a lot of commercial sensors for humans have been developed. A body area network (BAN) can be easily constructed by this communication method on human skin. In this study, a half-duplex FSK mutual communication device was developed using a commercial FSK modulator and demodulator. A special control switching circuit and communication sequence were developed for mutual communication through human skin.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.251-255
• /
• 2012

In recent years, according to improvement of various vehicle instruments, railway also has been developed in various fields. As a result, to transmit accurate information to each railway system, the efficient communication system is required. In railway communication system, mitigation of wireless fading is very important. So, in this paper we introduced the cooperative relay channel model and cooperative relay scheme. Also we analyzed and simulated the cooperative relay scheme which is suitable for railway communication systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.218-223
• /
• 1994

On the satellite communication system, conventional key issues of control have been focused on the attitude and orbit control, monitoring and control of communication payload such as IOT(In-Orbit-Test) and CSM(Communication System Monitoring) and so on. As the vulnerabilities are being increased on the satellite communication network, security services are required to protect it against security violated attacks. In this paper, a security architecture for satellite communication network is presented in order to provide security services and mechanisms. Authentication protocol and encryption scheme are also proposed for spacecraft command authentication and confidentiality.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.7
• /
• pp.1044-1047
• /
• 2002

In this study, proposes development present condition of fishery information communication system and development direction of communication system by fishery environment change

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.4
• /
• pp.1263-1270
• /
• 2000

The operation frequency of High-speed Communication System becomes very fast with the advanced technology of VLSI chips and system implementation. There may exist various types of noise sources degrading the signal integrity in this system. The present main system is made of backplane, so faults can be brought whenever a board is removed, replaced or added. This backplane boards testing is a very important process to verify the operation of system. firstly, we model the effects of the internal noises in the High-speed Communication System to the signal line and propose a new design method to minimize these effects. For the design methodology, we derive the characterization value for each mode land them construct the optimal simulation model. We compare the result of own proposing method with that fo the existing methods, through simulation and show that the quality of High-speed Communication System is significantly enhanced. Secondary our proposing BIST for the Backplane Boards Testing is designed to guarantee that there is no fault in the high-speed communication system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.9
• /
• pp.602-606
• /
• 2015

This paper presents a ZigBee wireless communication system for remote diagnosis in overhead distribution power lines. The system is divided in three parts in the functional aspect - a host computer module, a remote controller module and a diagnostic system module. The host computer module designed as USB interface transmits control signals and receive data measured by sensor. The remote controller module operates the diagnostic system. Diagnostic system module communicates with internal main controller and host computer USB. Multiple communication channel is adopted for simultaneous operations of several diagnostic system. Dedicated protocol for each module is developed. The system is designed with a focus on low cost and small size suitable for lightweight and small diagnostic system.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1996.10a
• /
• pp.323-326
• /
• 1996

In this paper, we propose a new method of the communication system for cooperative behavior and control in a collective autonomous mobile robots. A communication function among the collective robots is essential to intelligent cooperation. In general, global communication is effective for small number of robots. However when the number of robot goes on increasing, this becomes difficult to be realized because of limited communication capacity and increasing amount of information to handle. And also the problems such as communication interference and improper message transmission occur. So we propose local communication system based on infrared sensor to realize the cooperative behavior and control as the solution of above problem. It is possible to prevent overflow of information and exchange of complex information by combining communicate a specific robot. At last we verify the effectiveness of the proposed communication system from example of cooperative behavior.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.180-183
• /
• 1997

In this paper, we present the Tele-consulting system of radiology, which uses the communication network as asymetric satellite data communication system. The asymetric satellite data communication system uses receive-only satellite links or data delivery and PSTN(Public Switched Telephone Network) modem or N-ISDN(Integrate Services Digital Network) for communication. The satellite communication linking shows the very high-speed performance than 28.8kbps modem linking. The satellite linking is 5 - 10 times aster than the modem linking. Consequently, we get the conclusion that our system is suitable or tele-radiology and telemedicine.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1344-1353
• /
• 2008

The trend is that the wireless communication system, which has specific characteristics ; low cost & limitation for installation, has been developed more actively than the wire communication system. Therefore, the communication system has been changed from the wire system with an optical cable to the wireless system in the various field of life. In the railroad field, lots of researches on the wireless communication system for the safety of infrastructure and the convenience of passenger have been conducted. The WSN(Wireless Sensor Network), which means same concept with USN(Ubiquitous Sensor Network), pursues the ubiquitous environment which means user can access network at anywhere and anytime. In this paper, the wireless communication technologies which are suitable for the WSN of subway station were investigated and the best solution of WSN was suggested.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.10
• /
• pp.1412-1419
• /
• 2012

In this paper, we propose the protection coordination algorithm using communication methode based on IEC 61850. The communication protocol in power distribution management system has been issued by IEC standard, IEC61850 of them, which was made for substation automation system, has researched to apply into power distribution system, even though the standard is not a suitable for the system. In smart distribution management system' launched in 2009, the communication network based on the ethernet network for IEC 61850 has been designed to apply the self-healing concept, which is to perform the system protection through the communication between remote terminal units(RTU) according to the standard. However, it is first time to apply the scheme in the real. Thus, this paper proposed the protection algorithm and consideration for applying communication method and introduced the result of demonstration.