• Journal of Communications and Networks
• /
• v.10 no.4
• /
• pp.412-421
• /
• 2008

We observe simultaneous transmission of relay stations (RSs) allowed in current IEEE 802.16j draft standard for multi-hop relay networks may involve severe interference among the RSs, hence leading to throughput degradation. Allowing only 1/3 of the RSs to simultaneously transmit instead of 1/2 RSs as in the current draft standard reduces the interference but results in reduced throughput. To remedy this problem, we devise schemes to incorporate network coding at link-layer level (decode-and-forward) into the simultaneous transmission of RSs. Data movement is rearranged to maximize coding gain. Formula is derived to dictate exact movement of packets traveling between base station (BS) and mobile stations (MSs) via intermediate RSs. The frame structure in the current IEEE 802.16j draft standard does not allow broadcast needed for network coding. We devise a new frame structure which supports the broadcast. A new R-MAP (pointers to the burst data) is introduced to implement the broadcast. Since our new frame structure is used only for BS to RS or RS to RS communication, our schemes retain backward compatibility with legacy MSs based on IEEE 802.16e standard. Simulation based on simple configuration of RSs shows considerable improvement in terms of system throughput and round trip delay. For a 4-hop relay network with 1 BS and 4 RSs with symmetric traffic in uplink (UL) and downlink (DL), throughput is improved by 49% in DL and by 84% in UL traffic compared with IEEE 802.16j draft standard under the assumption that omni-directional antennae are used in BS and RSs.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.205-218
• /
• 2012

Mobility management of the mobile nodes and provision of seamless handover is crucial to an efficient support for the global roaming of the mobile nodes in next-generation wireless networks. Mobile IPv6 and mobility management in extended IP layer, which highly depend on traffic characteristics and user mobility models, were proposed by the IETF. Therefore, to evaluate the in-depth performance about these factors is important. Generally, the performance of IPv6-based mobility management protocol is evaluated through simulation. This paper shows the correlation between network parameters and performance metrics through numerical results, which is investigated how influence handoff latency and packet loss. And this paper uses mathematical analysis of the system parameters, such as the subnet residence time, the packet arrival rate and delay in wireless connection through the analytical framework which evaluate the performance of IPv6-based mobility management protocol.

• Journal of Sensor Science and Technology
• /
• v.8 no.5
• /
• pp.400-406
• /
• 1999

Piezoresistive flow sensors with four different types of microbeam structures were fabricated using (100), n/$n^+$/n three-layer silicon wafer and their characteristics were investigated. Piezoresistors were formed through boron diffusion and its values were about $1\;k{\Omega}$. Three-dimensional silicon microbeams were constructed by porous silicon micromachining and curled microbeams were fabricated by the difference in the thermal expansion coefficient between silicon and metal. The output response of the fabricated sensor was evaluated through half- bridge. The output voltage increased with increasing length of microbeam at the same flow velocity, while the detectable measurement range extended with decreasing length of microbeam. The output voltage of the fabricated sensors were increased with quotient of 3.2 of the flow rate since the stress of the beam versus the gas flow showed non-linear characteristics.

• Journal of Sensor Science and Technology
• /
• v.2 no.1
• /
• pp.19-27
• /
• 1993

Capacitive pressure sensor for low pressure measurements has been fabricated by using $n^{+}$ epitaxial layer electrochemical etching stop and glass-to-silicon electrostatic bonding technique. The sensor had hybrid configuration of a sensor chip, which consists of sensor capacitor and reference capacitor, and two output signal detection IC chips. A fabricated sensor, with a $1.0{\times}1.0 mm^{2}$ square size and a $10{\mu}m$ thick flat diaphragm, showed a 7.1 pF zero pressure capacitance, and 5.2 % F.S, sensitivity in 10 KPa pressure range. By using a capacitance to voltage converter, the thermal zero shift of 0.051 %F.S./$^{\circ}C$ and the thermal sensitivity shift of 0.12 %F.S./$^{\circ}C$ for temperature range of $5{\sim}45^{\circ}C$ were obtained.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.1
• /
• pp.25-35
• /
• 2002

Many multimedia presentation applications involve retrieval of objects from more than one collaborating server. Presentations of objects from different collaborating servers might be interdependent. This implies that objects should be retrieved from remote servers and delivered continuously according to given time constraints. Such applications need an estimate of the avaliable network resources to each of the collaborating servers and local system resources in order to identify a schedule for retrieving the objects composing the presentation. A collaborating server can suggest modifications of the retrieval schedule depending on its load. these modifications can potentially affect the retrieval schedule for other collaborating applications. Hence, a sequence of negotiations has to be carried out with the collaborating servers in order to commit for a retrieval schedule of the objects composing the presentation. In this paper, we propose an application sub-layer protocol, RLCP(Resource Lock Commit Protocol), for handling the negotiation and commitment of the resources required for a collaborative multimedia presentation and apply it to distributed video presentation application.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.1
• /
• pp.167-177
• /
• 2018

As the number of attacks on vehicles has increased, studies on CAN-based security technologies are actively being carried out. However, since the upper layer protocol of CAN differs for each vehicle manufacturer and model, there is a great difficulty in researches such as developing anomaly detection for CAN or finding vulnerabilities of ECUs. In this paper, we propose a method to infer the detailed structure of the data field of CAN frame by analyzing CAN trace to mitigate this problem. In the existing Internet environment, many researches for reverse engineering proprietary protocols have already been carried out. However, CAN bus has a structure difficult to apply the existing protocol reverse engineering technology as it is. In this paper, we propose new field classification methods with low computation-cost based on the characteristics of data in CAN frame and existing field classification method. The proposed methods are verified through implementation that analyze CAN traces generated by simulations of CAN communication and actual vehicles. They show higher accuracy of field classification with lower computational cost compared to the existing method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.1946-1953
• /
• 2006

Because the embedded watermark of luminance component guarantees the extraction of ownership information when the color image is converted to gray scale image, the information of ownership right as to the luminance component is embedded in the luminance-chrominance color space such as YCbCr. Therefore, this paper proposes watermark embedding, extraction and authentication algorithm of color image. which considers the device and performance of multimedia contents service by focusing on the robustness and invisibility of watermark. The color image is converted from RGB color space to YCbCr color space, and then the properties of each component of Y(Luminance), Cb(Color Differences) and Cr(Color Differences) are considered in order to embed, extract and certify multi-level watermark in the frequency domain based on the wavelet. As a result, it can guaranteed the robustness for the JPEG compression and invisibility of watermark for multi-level.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.1
• /
• pp.76-82
• /
• 2002

In this paper, we implemented on the classifier for differential diagnosis of laryngeals disease which is normal, polyp, nodule, palsy, and each step of glottic cancer using hierarchical neural network. We conducted on classifier of various vowels as /a/, /e/, /i/, /o/, /u/ from normal group, laryngeal disease group, each step of cancer group. The experimental result on classification of each vowels as follows. A /a/ vowel shows excellent classification result to the other vowels in regard to each Input parameters. Thus we implemented the hierarchical neural network for differential diagnosis of laryngeals disease using only /a/ vowel. A implemented hierarchical neural network is composed of each other laryngeals disease apply to each other parameter in each hierarchical layer. We take the voice signals from patient who get the laryngeal disease and glottic cancer, and then use the APQ, PPQ, vAm, Jitter, Shimmer, RAP as input parameter of neural networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.301-307
• /
• 2015

In this paper, we consider wiretap channels in the presence of an eavesdropper assuming spatially correlated MIMO(multiple-input multiple-output) channels, where we analyze a physical layer security performance of orthogonal space-time block code(OSTBC) using one-bit feedback assuming cross polarized antennas at each node. In this paper, we present a method to select a transmit-antenna group for OSTBC using one-bit feedback(O-OSTBC) and compare secrecy outage probabilities of various transmit-antenna grouping methods. Especially, we propose an efficient transmit-antenna grouping method by comparing secrecy outage probabilities of O-OSTBC and conventional OSTBC in highly correlated MIMO channels.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1465-1470
• /
• 2017

In conventional MOSFETs, the silicon thickness is always larger than inversion layer, so that the drain induced barrier lowering (DIBL) is expressed as a function of oxide thickness and channel length regardless of silicon thickness. However, since the silicon thickness is fully depleted in the sub-10 nm low doped double gate (DG) MOSFET, the conventional SPICE model for DIBL is no longer available. Therefore, we propose a novel DIBL SPICE model for DGMOSFETs. In order to analyze this, a thermionic emission and the tunneling current was obtained by the potential and WKB approximation. As a result, it was found that the DIBL was proportional to the sum of the top and bottom oxide thicknesses and the square of the silicon thickness, and inversely proportional to the third power of the channel length. Particularly, static feedback coefficient of SPICE parameter can be used between 1 and 2 as a reasonable parameter.