• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.588-590
• /
• 1997

In this paper, a highly reliable communication network for DCS in nuclear power plant is designed. The structure and characteristics of DCS in nuclear power plant is briefly explained. The features needed for a communication network for DCS in nuclear power plant is described. According to the abovo features, the layer structure of the communication network is determined and each layer is designed in detail.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.602-605
• /
• 2001

This paper focus on a method to use Ethernet Network for Industrial Communication Network. Ethernet use the CSMA/CD MAC(Medium Access Control) Protocol at the Data-Link Layer, Which isn't suit for Industrial Communication Network requiring Real-Time Communication, periodic data processing, critical data processing characteristics. In this paper we proposed the Virtual Polling Algorithm at the Application Layer will be solution of using the Ethernet Network for the Industrial Communication Network, Proposed Algorithm terminate the Collision in the network thus Delay Time is reduced and Real-Time Communication will be implemented.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.324-326
• /
• 2016

In this study, we have investigated indium tin zinc oxide (ITZO) as an active channel for non-volatile memory (NVM) devices. The electrical and memory characteristics of NVM devices using multi-stack gate insulator SiO2/SiOx/SiOxNy (OOxOy) with Si-rich SiOx for charge storage layer were also reported. The transmittance of ITZO films reached over 85%. Besides, ITZO-based NVM devices showed good electrical properties such as high field effect mobility of 25.8 cm2/V.s, low threshold voltage of 0.75 V, low subthreshold slope of 0.23 V/dec and high on-off current ratio of $1.25{\times}107$. The transmission Fourier Transform Infrared spectroscopy of SiOx charge storage layer with the richest silicon content showed an assignment at peaks around 2000-2300 cm-1. It indicates that many silicon phases and defect sources exist in the matrix of the SiOx films. In addition, the characteristics of NVM device showed a retention exceeding 97% of threshold voltage shift after 104 s and greater than 94% after 10 years with low operating voltage of +11 V at only 1 ms programming duration time. Therefore, the NVM fabricated by high transparent ITZO active layer and OOxOy memory stack has been applied for the flexible memory system.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.352-359
• /
• 2021

This paper presents the definition and importance of ship-centric direct communication concerning ship safety of maritime autonomous and unmanned ships. It also proposes the concept of MX-S2X communication based on high frequency for wide-bandwidth technology and describes the design and simulation result for the physical layer of MX-S2X. It considered high-speed communication as well as overcoming maritime multi-path fading required to be resolved in the marine environment. The physical layer of MX-S2X communication was designed to overcome the occurrence of error-floor caused by multi-path fading even with receiving sufficient signal strength. To this purpose, a performance analysis was conducted on the physical layer by applying the channel model of the actual maritime communication environment. As a result of the performance analysis of the MX-S2X physical layer, it was confirmed that the BER error-floor observed in the VDE physical layer test was overcome, and it operated within the SNR 2dB degradation range compared to the AWGN channel. It is expected that this will show enough performance suitable for short-distance ship-centered direct communication and can be used for direct communication of maritime autonomous ships, unmanned ships, and group navigation of themshortly.

• Journal of Satellite, Information and Communications
• /
• v.12 no.3
• /
• pp.50-53
• /
• 2017

Satellite communications are vulnerable to malicious eavesdroppers and interceptors due to wide coverage and broadcasting applications. However, technologies for securing satellite networks have yet to be more articulated beyond high-layer packet encryption. As attempts for jamming and spoofing attacks spread out, it is extremely critical to invest on the development of physical layer security solutions. In this paper, we review current technologies for satellite communication network security both in high and physical layers. We also present recent research results on physical layer security in the fields of information theory and wireless networks. We suggest a future direction for satellite communication security, including a cross-layer approach.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.426.1-426.1
• /
• 2016

We report high work function Aluminum doped zinc oxide (AZO) films as insertion layer as a function of O2 flow rate between transparent conducting oxides (TCO) and hydrogenated amorphous silicon oxide (a-SiOx:H) layer to improve open circuit voltage (Voc) and fill factor (FF) for high efficiency thin film solar cell. However, amorphous silicon (a-Si:H) solar cells exhibit poor fill factors due to a Schottky barrier like impedance at the interface between a-SiOx:H windows and TCO. The impedance is caused by an increasing mismatch between the work function of TCO and that of p-type a-SiOx:H. In this study, we report on the silicon thin film solar cell by using as insertion layer of O2 reactive AZO films between TCO and p-type a-SiOx:H. Significant efficiency enhancement was demonstrated by using high work-function layers (4.95 eV at O2=2 sccm) for engineering the work function at the key interfaces to raise FF as well as Voc. Therefore, we can be obtained the conversion efficiency of 7 % at 13mA/cm2 of the current density (Jsc) and 63.35 % of FF.

• Journal of KIISE:Information Networking
• /
• v.37 no.1
• /
• pp.57-65
• /
• 2010

Recently, the character recognization technique is strongly needed to enable the mobile communication devices with cameras to gather input information from the users. In general, it is not easy to reuse a CBOCR(Camera Based Optical Character Recognizer) module because of its dependency on a specific platform. In this paper, we propose a software architecture for CBOCR module providing the easy adaptability to various mobile communication platforms. The proposed architecture is composed of the platform dependency support layer, the interface layer, the engine support layer, and the engine layer. The engine layer adopts a plug-in data structure to support various hardware endian policies. We show the effectiveness of the proposed method by applying the architecture to a practical product.

• Journal of Korea Multimedia Society
• /
• v.18 no.7
• /
• pp.853-863
• /
• 2015

In this paper, we proposed cross-layered approach of video codec and communication system for the efficient video streaming service. Conventional video streaming is served by divided system which consist of video codec layer and communication layer. Its disintegration causes the limitation of the performance of video streaming service. With the cross-layered design, each layer could share the information and the service is able to enhance the performance. And we proposed the selective retransmission method in communication system based on the cross-layered system that reflect the information of encoded video data. Selective retransmission method which consider the characteristics of video data improves the performance of video streaming services. We verified the proposed method with raw format full HD test sequence with H.264/AVC codec and MATLAB simulation. The simulation results show that the proposed method improves about 10% PSNR performance.

• Journal of Korea Multimedia Society
• /
• v.11 no.9
• /
• pp.1238-1244
• /
• 2008

Each layer operates independently in the present network structure. However, the importance of designing cross layer, which adapt between different layers, is on the rise, because of adapt to the variable communication environments. In this paper, we investigate the scheduling techniques of the cross layer. we research conventional scheduling methods and propose the multimedia service scheduling method which will be applied in future wireless communication environments. This method considers the diversity of multimedia service and manages the radio resources efficiently Moreover, we apply AMC for flexibility and improve the performance of the scheduling method. The proposed method is verified through the simulation appying variable environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.185-191
• /
• 2015

This paper suggest the safety class communication board in order to design the safety network of the nuclear safety class controller. The reactor protection system use the digitized networks because from analog system to digital system. The communication board shall be provided to pass the required performance and test of the safety class in the digital network used in the nuclear safety class. Communication protocol is composed of physical layer(PHY), data link layer(MAC: Medium Access Control), the application layer in the OSI 7 layer only. The data link layer data package for the cyber security has changed. CRC32 were used for data quality and the using one way communication, not requests and not responses for receiving data, does not affect the nuclear safety system. It has been designed in accordance with requirements, design, verification and procedure for the approving the nuclear safety class. For hardware verification such as electromagnetic test, aging test, inspection, burn-in test, seismic test and environmental test in was performed. FPGA firmware to verify compliance with the life-cycle of IEEE 1074 was performed by the component testing and integration testing.