• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1105-1111
• /
• 2006

In this paper, using low-temperature co-fired ceramic(LTCC) based system-in-package(SiP) technology, a very compact power amplifier LTCC module was designed, fabricated, and then characterized for 60 GHz wireless transmitter applications. In order to reduce the interconnection loss between a LTCC board and power amplifier monolithic microwave integrated circuits(MMIC), bond-wire transitions were optimized and high-isolated module structure was proposed to integrate the power amplifier MMIC into LTCC board. In the case of wire-bonding transition, a matching circuit was designed on the LTCC substrate and interconnection space between wires was optimized in terms of their angle. In addition, the wire-bonding structure of coplanar waveguide type was used to reduce radiation of EM-fields due to interconnection discontinuity. For high-isolated module structure, DC bias lines were fully embedded into the LTCC substrate and shielded with vias. Using 5-layer LTCC dielectrics, the power amplifier LTCC module was fabricated and its size is $4.6{\times}4.9{\times}0.5mm^3$. The fabricated module shows the gain of 10 dB and the output power of 11 dBm at P1dB compression point from 60 to 65 GHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1563-1568
• /
• 2003

The introduction of invasive marine species of living things into new environments by ship's ballast water, attached to ships' hulls and via other vectors has been identified as one of the four greatest threats to the world's oceans by Global Environment Facility(GEF). Making use of the new technology of alpha-AL$_2$O$_3$ dielectric barrier layer, the strong electric-field gas discharge was introduced and obtained between micro-gap electrodes at high pressure (∼105㎩) of $O_2$ in air and $H_2O$ in seawater. The mixed air with $H_2O$ could be ionized and dissociated into large numbers of activated particles of OH, $O_2$＋, O(1D), HO$_2$ and so on, and then dissolved into the ballast water to form dissolved hydroxyl radical with the concentration of ∼20mg/L. Therefore, the invasive marine species was treated effectively through the hydroxyl radical dissolved pipeline of ballast water by strong electric -field discharge.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1462-1470
• /
• 2003

According to the necessity about information security as well as the advance of IT system and the spread of the Internet, a variety of cryptography algorithms are being developed and put to practical use. In addition the technique about cryptography attack also is advanced, and the algorithms which are strong against its attack are being studied. If the linear transformation matrix in the block cipher algorithm such as Substitution Permutation Networks(SPN) produces the Maximum Distance Separable(MDS) code, it has strong characteristics against the differential attack and linear attack. In this paper, we propose a new algorithm which cm estimate that the linear transformation matrix produces the MDS code. The elements of input code of linear transformation matrix over GF$({2_n})$ can be interpreted as variables. One of variables is transformed as an algebraic formula with the other variables, with applying the formula to the matrix the variables are eliminated one by one. If the number of variables is 1 and the all of coefficient of variable is non zero, then the linear transformation matrix produces the MDS code. The proposed algorithm reduces the calculation time greatly by diminishing the number of multiply and reciprocal operation compared with the conventional algorithm which is designed to know whether the every square submatrix is nonsingular.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1193-1200
• /
• 2010

This paper presents a new adaptive macroblock quantization algorithm which generates the output bits corresponding to the target bit budget. The H.264 standard uses various coding modes and optimization methods to improve the compression performance, which makes it difficult to control the amount of the generated traffic accurately. In the proposed scheme, linear regression analysis is used to analyze the relationship between the bit rate of each macroblock and the quantization parameter and to predict the MAD values. Using the predicted values, the quantization parameter of each macroblock is determined by the Lagrange multiplier method and then modified according to the difference between the bit budget and the generated bits. It is shown by experimental results that the new algorithm can generate output bits accurately corresponding to the target bit rates.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.534-539
• /
• 2010

In genomic studies, thousands of features are collected on relatively few samples. One of the goals of these studies is to build classifiers to predict the outcome of future observations. There are three inherent steps to build classifiers: a significant gene selection, model selection and prediction assessment. In the paper, with a focus on prediction assessment, we normalize microarray data with quantile-normalization methods that adjust quartile of all slide equally and then design a system comparing several methods to estimate 'true' prediction error of a prediction model in the presence of feature selection and compare and analyze a prediction error of them. LOOCV generally performs very well with small MSE and bias, the split sample method and 2-fold CV perform with small sample size very pooly. For computationally burdensome analyses, 10-fold CV may be preferable to LOOCV.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.4
• /
• pp.664-669
• /
• 2018

To observe the relationship between the oxygen vacancy and electrical characteristics of $TiO_2$ due to the $CO_2$ gases, the $TiO_2$ were deposited by the mixing gases of $Ar:O_2=20$ sccm:20 sccm and annealed with various temperatures. The bonding structure was changed with the annealing temperature from amorphous to crystal structure, and the oxygen vacancy was also changed with these bonding structures. The $CO_2$ gas reaction of $TiO_2$ films showed the variation in accordance with the bonding structure. The capacitance increased at the amorphous structure $TiO_2$, and the current also increased. However the oxygen vacancy decreased at this amorphous structure $TiO_2$. Because of the formation of oxygen vacancies is in inverse proportion to the amorphous structure. Moreover, the diffusion current in the depletion layer such as the amorphous structure showed the difference in accordance with the $CO_2$ gas flow rates.

• Journal of Communications and Networks
• /
• v.10 no.4
• /
• pp.371-383
• /
• 2008

Application of network coding in wireless two-way relay channels (TWRC) has received much attention recently because its ability to improve throughput significantly. In traditional designs, network coding operates at upper layers above (including) the link layer and it requires the input packets to be correctly decoded. However, this requirement may limit the performance and application of network coding due to the unavoidable fading and noise in wireless networks. In this paper, we propose a new wireless network coding scheme for TWRC, which is referred to as soft network coding (SoftNC), where the relay nodes applies symbol-by-symbol soft decisions on the received signals from the two end nodes to come up with the network coded information to be forwarded. We do not assume further channel coding on top of SoftNC at the relay node (channel coding is assumed at the end nodes). According to measures of the soft information adopted, two kinds of SoftNC are proposed: amplify-and-forward SoftNC (AF-SoftNC) and soft-bit-forward SoftNC (SBF-SoftNC). We analyze the both the ergodic capacity and the outage capacity of the two SoftNC schemes. Specifically, analytical form approximations of the ergodic capacity and the outage capacity of the two schemes are given and validated. Numerical simulation shows that our SoftNC schemes can outperform the traditional network coding based two-way relay protocol, where channel decoding and re-encoding are used at the relay node. Notable is the fact that performance improvement is achieved using only simple symbol-level operations at the relay node.

• Journal of Communications and Networks
• /
• v.10 no.4
• /
• pp.412-421
• /
• 2008

We observe simultaneous transmission of relay stations (RSs) allowed in current IEEE 802.16j draft standard for multi-hop relay networks may involve severe interference among the RSs, hence leading to throughput degradation. Allowing only 1/3 of the RSs to simultaneously transmit instead of 1/2 RSs as in the current draft standard reduces the interference but results in reduced throughput. To remedy this problem, we devise schemes to incorporate network coding at link-layer level (decode-and-forward) into the simultaneous transmission of RSs. Data movement is rearranged to maximize coding gain. Formula is derived to dictate exact movement of packets traveling between base station (BS) and mobile stations (MSs) via intermediate RSs. The frame structure in the current IEEE 802.16j draft standard does not allow broadcast needed for network coding. We devise a new frame structure which supports the broadcast. A new R-MAP (pointers to the burst data) is introduced to implement the broadcast. Since our new frame structure is used only for BS to RS or RS to RS communication, our schemes retain backward compatibility with legacy MSs based on IEEE 802.16e standard. Simulation based on simple configuration of RSs shows considerable improvement in terms of system throughput and round trip delay. For a 4-hop relay network with 1 BS and 4 RSs with symmetric traffic in uplink (UL) and downlink (DL), throughput is improved by 49% in DL and by 84% in UL traffic compared with IEEE 802.16j draft standard under the assumption that omni-directional antennae are used in BS and RSs.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.205-218
• /
• 2012

Mobility management of the mobile nodes and provision of seamless handover is crucial to an efficient support for the global roaming of the mobile nodes in next-generation wireless networks. Mobile IPv6 and mobility management in extended IP layer, which highly depend on traffic characteristics and user mobility models, were proposed by the IETF. Therefore, to evaluate the in-depth performance about these factors is important. Generally, the performance of IPv6-based mobility management protocol is evaluated through simulation. This paper shows the correlation between network parameters and performance metrics through numerical results, which is investigated how influence handoff latency and packet loss. And this paper uses mathematical analysis of the system parameters, such as the subnet residence time, the packet arrival rate and delay in wireless connection through the analytical framework which evaluate the performance of IPv6-based mobility management protocol.

• Journal of Sensor Science and Technology
• /
• v.8 no.5
• /
• pp.400-406
• /
• 1999

Piezoresistive flow sensors with four different types of microbeam structures were fabricated using (100), n/$n^+$/n three-layer silicon wafer and their characteristics were investigated. Piezoresistors were formed through boron diffusion and its values were about $1\;k{\Omega}$. Three-dimensional silicon microbeams were constructed by porous silicon micromachining and curled microbeams were fabricated by the difference in the thermal expansion coefficient between silicon and metal. The output response of the fabricated sensor was evaluated through half- bridge. The output voltage increased with increasing length of microbeam at the same flow velocity, while the detectable measurement range extended with decreasing length of microbeam. The output voltage of the fabricated sensors were increased with quotient of 3.2 of the flow rate since the stress of the beam versus the gas flow showed non-linear characteristics.