• Journal of the Korean Data and Information Science Society
• /
• v.24 no.6
• /
• pp.1297-1307
• /
• 2013

Several multi-hop applications developed for vehicular ad hoc networks use broadcast as a means to either discover nearby neighbors or disseminate useful traffic information to othet vehicles located within a certain geographical area. However, the conventional broadcast mechanism may lead to the so-called broadcast storm problem, a scenario in which there is a high level of contention and collision at the link layer due to an excessive number of broadcast packets. To solve broadcast storm problem, we propose an RPB-MACn-based LV-CAST that is a vehicular broadcast algorithm for disseminating safety-related emergency message. The proposed LV-CAST identifies the last node within transmission range by computing the distance extending on 1 hop from the sending node of an emergency message to the next node of receiving node of the emergency message, and the last node only re-broadcasts the emergency message. The performance of LV-CAST is evaluated through simulation and compared with other message dissemination algorithms.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.12
• /
• pp.61-68
• /
• 2004

Wireless mobile communication systems request high speed mobility and high speed data transmission capability. In order to meet the requirements, OFDM(Orthogonal Frequency Division Multiplex) is mainly adopted in the physical layer of the wireless systems. In commercial wireless mobile systems, IEEE802.(11a, 16e, etc) series seem to be used as the modulation method. For supporting multiple air-interfaces in a wireless mobile system, different kinds of OFDM based modulation methods should be supported in one modem chip. It requires a variable point IFFT/FFT or reconfigurable IFFT/FFT processor. In this paper, we propose the design method of a reconfigurable IFFT/FFT processor. In addition, it is shown that a reconfigurable IFFT/FFT processor can he implemented by using the proposed method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.11
• /
• pp.28-33
• /
• 2002

In this paper, the impedance-tuned monopole microstrip antenna designed for PCS is analyzed using finite difference time domain(FDTD) method. The perfectly matched layer(PML) absorbing material condition proposed by Berenger is used for the truncation of finite difference time domain lattice. A Gaussian pulse is selected as an excitation signal and a resistive voltage source model is used to reduce the error caused by the reflection waves. The FDTD method is inherently a near field technique. Therefore, the near field to far field transformation is need to compute far field antenna parameters such as radiation patterns and gain. The near field to far field transformation can be done both in the time domain and the frequency domain. We use the frequency domain transformation to compute the far field radiation patterns at single frequency. All the numerical results obtained by the FDTD method are compared with simulation results using the HFSS software. Good agreements are obtained in all cases.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1384-1393
• /
• 2008

In this paper, we analyzed the multilayer structure with lossy metamaterials using ABCD Matrix method to get the transmission characteristics. Compared to the recursive method which cannot be used to analyze the lossy characteristics of multilayer structure because of its complexity, we used the ABCD matrix method is easy to apply because of its matrix chain concepts for arbitrary number of multilayer structure and lossy material. To verify the results of this paper, we used both for multilayer dielectric and metamaterial, respectively, and obtained the same results. Multilayer structure with lossy metamaterial showed minimized ripple and broadband transmission compared to dielectric multilayered structure. This can be used in various applications as antenna radome and shielding material, etc.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.547-554
• /
• 2005

Ethernet has been given a greater attention recently due to tendency of unifying most of transmission technique to ethernet. This paper studied the design of MAC which contains high layer interface, transmit engine, flow control block, receive engine, reconciliation sublayer, configuration block, statistics block, and XGMll interface block. Performance evaluation was performed using C language for 10cbps ethernet Data Link to design the optimum hardware, then internal FIFO and initial parameters were evaluated. When offered load is $95\%$, the size of the internal FIFO is required 512-word. When offered load is $97\%$, the size of the internal FIFO is required 1024-word. Based on the result of performance evaluation, MAC was designed in VHDL Language and verified using simulator. MAC core that processes 64-bit data, operates at 168.549MHz and hence supports the maximum 10.78Gbps. The designed MAC core is applicable to an area that needs a high-speed data processing of 10Gbps or more.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.5
• /
• pp.812-820
• /
• 2006

Ethernet has been given a greater attention recently due to tendency of unifying most of transmission technique(not only LAN, but MAN and WAN) to ethernet. Performance evaluation was performed using C language for 10Gbps ethernet Data Link to design the optimum hardware, then internal FIFO size was evaluated. In this paper, MAC core for 10Gbps ethernet which contains high layer interface, transmit engine, flow control block, receive engine, reconciliation sublayer, configuration block, statistics block, and XGMII interface block was designed using VHDL language and Xilinx 6.2i tool and verified using Model_SIM 5.7G simulator. According to the specification of 10Gbps ethernet, MAC core with 64-bit data path should support 156.25MHz in order to support 10Gbps. The designed MAC core that process 64-bit data, operates at 168.549MHz and hence supports the maximum 10.78Gbps data processing. The designed MAC core is applicable to an area that needs a high-speed data processing of 10Gbps or more.

• Journal of the Korean Society of Costume
• /
• v.54 no.4
• /
• pp.63-74
• /
• 2004

This study shows that clothes to be just the same as the real thing can be Produced through the third dimension computer graphics, and then presents that not only the area of fashion design can be expanded in the virtual reality field by doing the simulation of the fashion show, but also the information can be made the real time public ownership and the communication can be fulfilled smoothly. In this study, analyzing the third dimension computer graphic programs to be used much at present, Alias Wavefront Company's Maya software which was the most effective in the clothes simulation and the clothes CAD SGS OptiTex 8.7 which went well substitutive for it were used of them. The conclusions of this study that got through the work manufacture are as follows： The first, if the file manufacturing in the clothes CAD by using the computer was stored, the pattern used 3D simulation was available because it could be summoned in 3D software. The second, if the data of DXF form in Maya program was summoned, they could not be applied by Maya Cloth supported in Nurbs only because they were recognized as the DXF＿layer. So the curve along the outer lines of the pattern was drawn and Maya Cloth was applied to be possible to get the natural silhouette of clothes. The third, when the clothes were manufactured by 3D, if the draping character was applied according to the textile special quality, not only the control of textile's thickness, weight, quality feeling, and silhouette was available, but also the clothes were available to graft the special textile materials. The fourth, the natural motion of model was produced by capturing the actual model's walking action In order to produce the fashion show motion and also the dynamic fashion show was available by the angle of camera, the establishment of lighting, and etc. in the final rendering. The clothes manufactured by 3D are available to change the design by changing the materials, or by adding the details, or by utilizing the special materials on clothes. Therefore, the trial and error following at the clothes manufacture can be reduced. But the elevation of the rendering speed, the price down, the strengthening of personal security, and etc. are required.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.9
• /
• pp.1250-1256
• /
• 2018

Recently, wireless networks are becoming an important infrastructure for the critical large-scale applications such as cyber-physical systems and next generation industrial automations. However, the fundamental performance uncertainty of wireless networks may incur the serious instability problem of the overall systems. This paper proposes the proactive network optimizer to guarantee the application demands without any real-time link monitoring information of the networks. In particularly, the proposed proactive optimizer is the cross-layer approach to jointly optimize the routing path and traffic distribution in order to guarantee the performance demand within a maximum k number of link faults. Through the simulations, the proposed proactive network optimizer provides better robustness than the traditional existing reactive networks. Furthermore, the proactive network does not expose to the major weakness of the reactive networks such as the performance degradation due to the erroneous link monitoring information and the network reconfiguration cost.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.119-124
• /
• 2010

The MAC layer in ad-hoc network which makes network of nodes without infrastructure for a time has became an issue to reduce delay, allocate fairly bandwidth, control TX/RX power and improve throughput. Specially, the problem to reduce power consumption in ad-hoc network is very important part as ad-hoc devices use the limited battery. For solution of the problem, many power control algorithms, such as distribute power control, PCM (Power Control MAC) and F-PCF (Fragmentation based PCM), are proposed to limit power consumption until now. Although the algorithms are designed to minimize power consumption, the latency communication zone is generated by power control of RX/TX nodes. However the algorithms don't suitably reuse the space. In this paper proposes the algorithm to improve data throughput through Spatial Reuse based on a power control method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.210-218
• /
• 2010

In order to improve the efficiency of frequency bandwidth, various modulation methods such as QAM and PSK have been widely used, and their variation APSK(Amplitude Phase Shift Keying) type modulation methods were proposed and are being used in some satellite communication systems. In this paper, a new constellation method named as $4L^2$-APSK is proposed, which places symbol points circularly as the existing APSK constellations do, but has different number of points and different distance between adjacent points on each layer. An equation for error probability in AWGN channel is also induced for $4L^2$-APSK. In addition, a new Gaussian noise channel is proposed in which noise variances are in the amplitude and in the phase and the two are not equal, and a method of obtaining error probabilities in this channel is also suggested. The equations for error probabilities are verified by computer simulations, and error probabilities of $4L^2$-APSK and QAM are analyzed and compared in the AWGN channel and the proposed noise channel, respectively.